- You are here:
- Helicopter
- Mikado
- LOGO 700
LOGO 700.
Systematically designed and put to the test, for tough competition flying.
The ideal 700 size machine, for every pilot, for every style of flying.
The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.
It utilizes tried and tested mechanical components like
The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.
The benefits at a glance:
The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics. It’s as robust as ever.
Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.
To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
Motors with other shaft diameters can be adapted easily by just replacing the shaft.
In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.
Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.
The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
Color accents to the tail fin also help with visibility.
With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.
Rotor diameter | 1,570 mm |
Rotor blades | 690-717 mm carbon rotor blades |
RTF weight | > 5,300 g |
recommended batterie | 12 S Lipo, 5,000 mAh |
Main gear ratio | 9.71 / 10.46 |
Main Gear size | 136 teeth, Module 1 25° herring bone |
batterie slot | 69 x 67 x 360 mm |
Content | |
Blades | Rotortech 710mm |
Tail Blades | Carbon Tail Rotor Blades 105 mm |
Canopy | Airbrush Glas Fiber Canopy |
Accessories | |
Motor | Scorpion 4525-520 Kv Ultimate with 6 x 55 mm motor shaft |
Motor pinion | 13/14 teeth pinion, modul 1 with 25° lead angle |
VBar electronic | VBar NEO/VBar NEO VLink |
This model helicopter is not suitable for children under 14 years!
Attributes | |
---|---|
Part number | MIK-02131 |
Module | Helicopter |
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Below you`ll find a list of compatible components / addons for the product Mikado LOGO 700 Rotortech 710 Combo.
You will need at least one component from each product group. We continously run tests and quality check on all components. Products we find having outstanding quality or features are rewarded wirh our badge "Recommended".
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
Currently sold out
Currently sold out
Will be ordered for you
Within DE: 7 Business Days **
Outside DE: 10 Business Days**
Currently sold out
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Product | Description | Order now | |
---|---|---|---|
MIK-04049 |
Mikado LOGO 400 / 480 / 550 / 600 / 690 / 700 Rotor disk
Currently sold out |
9,90 €* | |
MIK-04703 |
Mikado LOGO 700 Spindle shaft rotor head
Currently sold out |
12,90 €* | |
MIK-04508 |
Mikado LOGO 700 / 800 XXTREME Swashplate driver lever
Currently sold out |
29,00 €* | |
MIK-04706 |
Mikado LOGO 700 O-ring spacer
In stock, available
Within DE: 2 Business Days **
|
5,90 €* | |
MIK-05048 |
Mikado LOGO 700 Main blade holder with ball bearings
Currently sold out |
34,50 €* | |
MIK-05051 |
Mikado LOGO 700 Hex screw M3x30
In stock, available
Within DE: 2 Business Days **
|
5,60 €* | |
MIK-04702 |
Mikado LOGO 700 Thrust bearing rotor head
Currently sold out |
12,90 €* | |
MIK-01981 |
Mikado LOGO 700 Socket head cap screw M6x12
In stock, available
Within DE: 2 Business Days **
|
3,10 €* | |
MIK-05050 |
Mikado LOGO 700 Distance washer blade holder
In stock, available
Within DE: 2 Business Days **
|
11,60 €* | |
MIK-04705 |
Mikado LOGO 700 O-ring set, Yoke main rotor head
In stock, available
Within DE: 2 Business Days **
|
5,90 €* | |
MIK-05047 |
Mikado LOGO 700 Main rotor yoke
In stock, available
Within DE: 2 Business Days **
|
36,80 €* | |
MIK-02079 |
Mikado LOGO 550 SX / 550 SE / 700 Socket head cap screw M4x25
In stock, available
Within DE: 2 Business Days **
|
5,20 €* | |
MIK-04509 |
Mikado LOGO 700 / 800 XXTREME Radius arm swashplate driver
In stock, available
Within DE: 2 Business Days **
|
6,90 €* | |
MIK-04507 |
Mikado LOGO 700 / 800 XXTREME Linkage set rotorhead
Currently sold out |
9,90 €* | |
MIK-01954 |
Mikado LOGO 550 / 600 / 690 / 700 Socket head cap screw M3x12
Currently sold out |
3,10 €* | |
MIK-05049 |
Mikado LOGO 700 Blader holder arm
Currently sold out |
23,90 €* |
Product | Description | Order now | |||
---|---|---|---|---|---|
MIK-04711 |
Mikado LOGO 700 Main rotor shaft 240mm
Currently sold out |
19,90 €* | |||
MIK-04712 |
Mikado LOGO 600 SX / 700 Clamp ring for main rotor shaft
In stock, available
Within DE: 2 Business Days **
|
19,90 €* | |||
MIK-05016 |
Mikado LOGO 700 Upper sideframe left
In stock, available
Within DE: 2 Business Days **
|
36,00 €* | |||
S4073 | Not available anymore: Graupner Servo HCM 870 BB MG | ||||
BLS4028S |
NEXSPOR BLS4028S Brushless HV Digital Servo (Swashplate)
In stock, available
Within DE: 2 Business Days **
|
99,90 €* | |||
XN-LG-4525-530-F |
XNOVA Lightning 4525-530KV - 6/56mm shaft F
In stock, available
Within DE: 2 Business Days **
|
419,90 €* | |||
MIK-01953 |
Mikado LOGO 400 / 550 / 600 / 690 Socket head cap screw M3x10
In stock, available
Within DE: 2 Business Days **
|
3,10 €* | |||
MIK-05012 |
Mikado LOGO 700 Motorshaft Scorpion HK-4525 Motor, 6x55mm
Currently sold out |
29,90 €* | |||
MIK-01972 |
Mikado LOGO 400 / 480 / 700 Socket head cap screw M4x12
Currently sold out |
3,10 €* | |||
MIK-05024 |
Mikado LOGO 700 Motor counterbearing plate
In stock, available
Within DE: 2 Business Days **
|
22,70 €* | |||
MIK-05025 |
Mikado LOGO 700 Bolts for counterbearing plate
In stock, available
Within DE: 2 Business Days **
|
6,90 €* | |||
MIK-05010 |
Mikado LOGO 700 Pinion for herringbone gear 13 teeth 25°, M1, dia. 6mm
Currently sold out |
24,90 €* | |||
MIK-05011 |
Mikado LOGO 700 Pinion for herringbone gear 14 teeth 25°, M1, dia. 6mm
Currently sold out |
24,90 €* | |||
MIK-05023 |
Mikado LOGO 700 Motorplate
In stock, available
Within DE: 2 Business Days **
|
25,90 €* | |||
MIK-04589 |
Mikado LOGO 700 / 800 XXTREME Ball bolts swashplate
Currently sold out |
13,20 €* | |||
MIK-05026 |
Mikado LOGO 700 Linkage set swashplate
Currently sold out |
11,90 €* | |||
MIK-04469 |
Mikado LOGO 700 / 800 XXTREME Swashplate
Currently sold out |
99,00 €* | |||
MIK-05029 |
Mikado LOGO 700 Canopy
Currently sold out |
129,00 €* |
Product | Description | Order now | |
---|---|---|---|
MIK-05030 |
Mikado LOGO 700 Lower sideframe right
In stock, available
Within DE: 2 Business Days **
|
19,90 €* | |
MIK-05032 |
Mikado LOGO 700 Upper main rotor shaft support
Currently sold out |
19,90 €* | |
MIK-05031 |
Mikado LOGO 700 Lower sideframe left
Currently sold out |
19,90 €* | |
MIK-05033 |
Mikado LOGO 700 Hex screw M2,5x25
In stock, available
Within DE: 2 Business Days **
|
7,10 €* | |
MIK-05034 |
Mikado LOGO 700 Front canopy support
In stock, available
Within DE: 2 Business Days **
|
6,10 €* | |
MIK-04915 |
Mikado LOGO 550 / 600 / 690 / 700 Battery plate locking
Currently sold out |
12,90 €* | |
MIK-04099 |
Mikado LOGO 550 / 600 / 690 / 700 Metal hex bolts
In stock, available
Within DE: 2 Business Days **
|
4,90 €* | |
MIK-04290 |
Mikado LOGO 550 / 600 / 690 / 700 / 800 Landing bow low profile, black
Currently sold out |
9,90 €* | |
MIK-05053 |
Mikado LOGO 700 Accuplate
Currently sold out |
14,90 €* | |
MIK-01954 |
Mikado LOGO 550 / 600 / 690 / 700 Socket head cap screw M3x12
Currently sold out |
3,10 €* | |
MIK-02496 |
Mikado LOGO 690 SX / 700 Skid pipe 310 x dia.8mm black
In stock, available
Within DE: 2 Business Days **
|
10,00 €* | |
MIK-04292 |
Mikado LOGO 600 SE / 700 Landing struts low profile black
Currently sold out |
19,90 €* |
Product | Description | Order now | |
---|---|---|---|
MIK-05015 |
Mikado LOGO 700 Upper sideframe right
In stock, available
Within DE: 2 Business Days **
|
36,00 €* | |
MIK-05021 |
Mikado LOGO 700 Servo mounting plates 10+11mm
In stock, available
Within DE: 2 Business Days **
|
16,80 €* | |
MIK-05022 |
Mikado LOGO 700 Distance bushing bevel/teeth gear
In stock, available
Within DE: 2 Business Days **
|
8,70 €* | |
MIK-05020 |
Mikado LOGO 700 Mounting block for bevel/belt gear
In stock, available
Within DE: 2 Business Days **
|
14,50 €* | |
MIK-04601 |
Mikado LOGO 700 / 800 XXTREME Ball bearing 14x25x6
Currently sold out |
7,90 €* | |
MIK-04521 |
Mikado LOGO 700 / 800 XXTREME Ball bearing 6x13x5
In stock, available
Within DE: 2 Business Days **
|
6,20 €* | |
MIK-04523 |
Mikado LOGO 700 / 800 XXTREME Bevel/ belt gear pinion chassis gear box
In stock, available
Within DE: 2 Business Days **
|
12,90 €* | |
MIK-05019 |
Mikado LOGO 700 Tail boom distance spacer
Currently sold out |
12,90 €* | |
MIK-04522 |
Mikado LOGO 700 / 800 XXTREME Ball bearing 15x21x4
Currently sold out |
6,20 €* | |
MIK-04524 |
Mikado LOGO 700 / 800 XXTREME Bevel pinion torque tub
In stock, available
Within DE: 2 Business Days **
|
12,90 €* | |
MIK-05052 |
Mikado LOGO 700 Swashplate guide/ canopy mounting
In stock, available
Within DE: 2 Business Days **
|
15,50 €* | |
MIK-04517 |
Mikado LOGO 700 / 800 XXTREME Distance washer set dia.14 x dia.20
Currently sold out |
3,80 €* | |
MIK-04515 |
Mikado LOGO 700 / 800 XXTREME Main pulley
Currently sold out |
14,49 €* | |
MIK-05017 |
Mikado LOGO 700 Maingear 136 teeth, modul 1
Currently sold out |
18,90 €* | |
MIK-05018 |
Mikado LOGO 700 One way hub
Currently sold out |
25,90 €* | |
MIK-04099 |
Mikado LOGO 550 / 600 / 690 / 700 Metal hex bolts
In stock, available
Within DE: 2 Business Days **
|
4,90 €* |
Product | Description | Order now | |
---|---|---|---|
MIK-05042 |
Mikado LOGO 700 Horizontal fin with clamps
In stock, available
Within DE: 2 Business Days **
|
18,50 €* | |
MIK-05037 |
Mikado LOGO 700 Coupling for torque tube
In stock, available
Within DE: 2 Business Days **
|
18,70 €* | |
MIK-05041 |
Mikado LOGO 700 Tail rotor linkage
In stock, available
Within DE: 2 Business Days **
|
10,90 €* | |
MIK-05035 |
Mikado LOGO 700 Tail boom Ø25x774mm
Currently sold out |
19,20 €* | |
MIK-05036 |
Mikado LOGO 700 Torque tube Ø10x743mm
In stock, available
Within DE: 2 Business Days **
|
13,90 €* | |
MIK-05038 |
Mikado LOGO 700 Holder for torque tube, with ball bearing
In stock, available
Within DE: 2 Business Days **
|
20,50 €* | |
MIK-05040 |
Mikado LOGO 700 Tail boom brace
In stock, available
Within DE: 2 Business Days **
|
23,90 €* |
Product | Description | Order now | |
---|---|---|---|
MIK-05044 |
Mikado LOGO 700 Tai rotor case
In stock, available
Within DE: 2 Business Days **
|
18,10 €* | |
MIK-04521 |
Mikado LOGO 700 / 800 XXTREME Ball bearing 6x13x5
In stock, available
Within DE: 2 Business Days **
|
6,20 €* | |
MIK-05046 |
Mikado LOGO 700 Tail rotor shaft with bevel gear
Currently sold out |
13,30 €* | |
MIK-05045 |
Mikado LOGO 700 Hex Screw M2,5x27
In stock, available
Within DE: 2 Business Days **
|
7,10 €* | |
MIK-05043 |
Mikado LOGO 700 Vertical fin
Currently sold out |
24,50 €* | |
MIK-05121 |
Mikado LOGO 700 Vertical fin carbon
In stock, available
Within DE: 2 Business Days **
|
19,90 €* | |
MIK-04569 |
Mikado LOGO 700 / 800 XXTREME Tail Rotor Hub set with blade holder
In stock, available
Within DE: 2 Business Days **
|
35,00 €* | |
MIK-04568 |
Mikado LOGO 700 / 800 XXTREME Tail Rotor Lever
Currently sold out |
9,90 €* | |
MIK-04522 |
Mikado LOGO 700 / 800 XXTREME Ball bearing 15x21x4
Currently sold out |
6,20 €* | |
MIK-04524 |
Mikado LOGO 700 / 800 XXTREME Bevel pinion torque tub
In stock, available
Within DE: 2 Business Days **
|
12,90 €* | |
MIK-02071 |
Mikado LOGO 550 / 600 / 690 / 700 Hex nut M2,5
Currently sold out |
2,40 €* | |
MIK-04567 |
Mikado LOGO 700 / 800 XXTREME Tail rotor control sleeve assembly
In stock, available
Within DE: 2 Business Days **
|
22,00 €* | |
MIK-04584 |
Mikado LOGO 700 / 800 XXTREME Tail rotor hub
In stock, available
Within DE: 2 Business Days **
|
19,00 €* | |
MIK-04571 |
Mikado LOGO 700 / 800 XXTREME Spindle Shaft For Tail Rotor Hub
Currently sold out |
7,79 €* | |
MIK-04570 |
Mikado LOGO 700 / 800 XXTREME O-Rings For Tail Rotor Hub
In stock, available
Within DE: 2 Business Days **
|
5,90 €* | |
MIK-02470 |
Mikado LOGO 400 / 480 / 700 Ball bearing 5x10x4
Currently sold out |
6,20 €* | |
MIK-04583 |
Mikado LOGO 700 / 800 XXTREME Tail rotor blade holder
In stock, available
Within DE: 2 Business Days **
|
11,90 €* | |
MIK-04582 |
Mikado LOGO 700 / 800 XXTREME Thrust bearing 5x10x4
Currently sold out |
13,20 €* |