Deutsch
English
- You are here:
- Helicopter
- Ready to fly models
Class 100 power benchmark.
Purpose-built, ultra-light 100-size micro helicopter for every skill level, from beginner to 3D expert, with 20-30% longer flight times, more power and more control authority.
112g flying weight (including built-in ExpressLRS receiver) and 297mm rotor diameter produce the lightest disk loading and most mature flight feel in-class.
Controlled by OFS3+ with integrated ExpressLRS, reaching unparalleled
levels of flight performance in a micro helicopter. Features include
full telemetry support, app integration, tuning options through
simplified LED setup or full PID access, firmware updates, as well as
3D, self-leveling and a fully-featured rescue mode.
Compatible with CRSF (ExpressLRS, Crossfire, Tracer), F.Port, SRXL2, DSM and S.BUS receivers.
Integrated lightweight aluminium alloy servo mounting frame, featuring a 120° equally spaced layaout thast balances high-strength deformation resistance with leightweight performance.
Maintains structural stability under complex flight conditions, providing a solid hardware soundation for precise contol.
The airframe of M1 V3 PRO has been completely re-engineered from the ground up to optimize weight wherever possible while retaining incredible durability and flight performance. The frame structure now closely follows the M2 V3 helicopter line, which has proven to be extremely light yet virtually bullet-proof in crashes. A central main plate forms the backbone of the frame and holds the motor, servo rack, new and improved DS2045LW V2 servos, and tail boom, while two sturdy carbon panels provide mounting points for the skids, battery, and OFS3+ flight controller. The frame features reinforcement plates in the rear, much like its bigger brothers, redirecting forces in a crash to increase the likelihood of core-components surviving. All screws on M1 V3 PRO have been carefully chosen and exclusively feature 1.3mm and 1.5mm hex heads. No more special tools required, no compromises, you only need two standard size hex drivers to service the entire helicopter.
With a new bearing-enhanced rotor system.
As a first in its size class, M1 V3 PRO has a main rotor head built with axial bearings. This measure extends the service life of the blade grip bearings greatly, while offering smoother, more precise control of your blade angles, and therefore, rotor thrust and cyclic torques. Together with a new, more agile rotor geometry, as well as the new APEX 125 rotor blades, this new, black anodized and bead blasted rotor head is ready to propel and guide the M1 V3 PRO through even the hardest 3D flights. At the same time, it allows for incredibly precise and fine control at lower RPMs. Featuring a new rotor geometry optimized for OFS3, M1 V3 PRO allows for more control power than ever before.
The all-new R23X-2 main motor is designed to handle sudden high loads in 3D flying. It offers an exceptional power-to-weight ratio and efficiency, delivering explosive thrust while extending flight time during aggressive maneuvers.
A super-light tail comprising a round carbon tube with a minimalist motor mount and color-matched, double-sided printed tail fin provides top-level durability.
Optimized R11X-2 motor and keyed APEX27 tail propeller deliver stronger thrust with lower noise levels, which together with OFS3+’s 2nd generation TALY, surpass collective-pitch level tail control.
The tail boom is now made from a hollow carbon fiber tube, increasing durability and reducing weight. The minimalist tail motor mount guarantees crisp and fast yaw response, while serving as a heat-sink for the new R11X-2 tail motor. This motor drives the new APEX 27 tail propeller, which substantially increases tail rotor performance, while reducing noise and improving visibility compared to the previous M1 tail propeller. The propeller hub and tail motor shaft are now rotationally and directionally keyed, so that the risks of tail propeller slippage and reverse-installation are eliminated. The look is finished off by a double-sided printed carbon fiber tail fin, color-matched to the canopy.
Streamlined Canopoy with a wind-cutting arc.
Newly designed, extremely sleek, aerodynamic and durable canopy to match other OMPHOBBY models. Available in four paint schemes: Cosmic Orange, Solar Yellow, Nebula Pink, Aurora Green.
Only two screw driver sizes are required to service the entire helicopter, 1.3mm and 1.5mm hex. All proprietary or exotic screw heads have been eliminated.
Package Contents::
Still needed:
This model helicopter is not suitable for children under 14 years!
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
.jpg)
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
.jpg)
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Below you`ll find a list of compatible components / addons for the product OMPHOBBY Heli M1 V3 PRO Nebula-Pink BNF.
You will need at least one component from each product group. We continously run tests and quality check on all components. Products we find having outstanding quality or features are rewarded wirh our badge "Recommended".
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
.jpg)
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
.jpg)
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
.png){kind=icon}
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
Currently sold out