- You are here:
- Helicopter
- soXos
«Lightness is the key!»
Since
its introduction, the soXos Strike 7.1 has established itself as a
robust and reliable machine for the demanding 3D pilot. The enormous
strength of all components enables problem-free use of the most extreme
motors. Many pilots also use it with a light setup and a 6s power
system. We are now dedicating the new soXos Strike 7.1 Light to these
pilots. By reworking many parts, its take-off weight, including the
battery, has been reduced to less than 4 kg.
Due to its extremely
low weight for a 700 size helicopter, the Strike 7.1 Light can be flown
at significantly lower headspeeds, giving the pilot a completely new,
calmer and more relaxed feeling of flying. Its flight envelope is not
limited to leisurely and relaxed cruising around, but all common
aerobatic manoeuvres can also be carried out with this lightweight model
- just everything performed a little quieter, slower, and more chilled
out. This makes it the ultimate fun device for relaxed after-work
flights or for pilots who don't want to deal with large and expensive
batteries and the associated charging technology.
Here are the main differences to the well-known Strike 7.1:
- 10 mm rotor shaft and 8 mm feathering shaft
- Adapted rotor head block, blade grips (grip size and bolt hole are still 14mm and 5 mm)
- Intermediate gear with lighter oneway adapted to the lower power system performance
- Motor pinion in Aluminum
- More generously milled, lighter carbon fibre composite side plates
- Smaller, lighter glass fibre composite canopy
The rest of the model has been taken directly from
the "big" brother 7.1. The entire tail assembly also comes from the
Strike 7.1, so that Strike light pilots can enjoy the same tail
performance that extreme pilots value so much on the 7.1. In addition,
the many identical parts also make it easier to stock up on spare parts
for pilots who already own a Strike 7.1.
Variants:
The
Strike 7.1 light is offered in a kit and a combo version. In addition to
the kit with a colored canopy, the kit includes the matching-colored
rotor blades. Available colors are: yellow, orange, green, red, white,
blue and pink.
The combo version also comes with 3 swashplate servos
1st ST-3010MG and a tail servo 1st ST-3015MG, the brushless outrunner
motor 1st 4125-830kV (matching the included motor pinion) and the
Hobbywing Platinum V5 150A speed controller. You only need a stabilizer
(flybarless) system, receiver and the flight battery with 6S / 5000 -
6500mAh to complete the helicopter.
- Weight of the mechanics without RC components & rotor blades: approx. 1,880g.
- Weight 6S setup (without drive battery): approx. 3,250g.
- Main rotor diameter: approx. 1,540 mm with 690mm rotor blades
- Rotor blade length: 685 - 690mm
- Tail rotor blade length: 105mm
- Tail speed: 1: 5.05
- Main gear ratios: 7.94 - 10.06 (9.43 included in the kit)
- Motor pinions are compatible with for 6mm and 8mm motor shafts
- Maximum size of the motor: Ø 63mm, height 64mm, motor shaft length from 20mm to- 56mm
- Maximum dimension of the drive battery: width 62mm, height 68mm, length 350mm
- Total lenght: 1,360mm
- Height: 340mm
- Headspeed range: min. 1100 to max. 1900 rpm
Gear ratios: (Pinion are available for 6mm/8mm motor shafts)
- 15 teeth: 10.06
- 16 teeth: 9.43 (included in kit)
- 17 teeth: 8.87
- 18 teeth: 8.38
- 19 teeth: 7.94
Kit contents:
- soXos Strike 7.1 Light Kit
- 16t motor pinion for 6s motors from 800 to 850kV and 6mm or 8mm motor shaft
- Battery plate
- Aluminium servo arms suitable for all common servo types
- Canopy with matt finish in the colour of your choice
- Main rotor blades 1st-RC 690mm
- Tail rotor blades 1st-RC 105mm
- Instructions
Recommended components: (not included in the KIT)
- Flybarless system
- ESC: 6S from 130A
- Motor: 600 - 700 class with 700 - 900KV / 6mm or 8mm shaft
- Motor shaft length from 20 - 56mm
- Maximum size motor: Ø 63mm, height 64mm
- Swashplate servos 3pcs.: min.14kg / cm
- Tail servo: min. 6kg / cm
- 6S battery 5'000 - 6'500mAh (maximum drive battery size: width 62mm, height 68mm, length 350mm)
- Transmitter-receiver
This model helicopter is not suitable for children under 14 years!
Attributes | |
---|---|
Part number | SO-8876 |
Module | Helicopter |
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Below you`ll find a list of compatible components / addons for the product soXos Strike 7.1 light Kit (6S) with 1st Blades.
You will need at least one component from each product group. We continously run tests and quality check on all components. Products we find having outstanding quality or features are rewarded wirh our badge "Recommended".
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
Currently sold out
Will be ordered for you
Within DE: 7 Business Days **
Outside DE: 10 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**
In stock, available
Within DE: 2 Business Days **
Outside DE: 5 Business Days**