- You are here:
- By manufacturer
- SAB Goblin
Dieses Modell wurde von uns professionell gebaut und eingestellt.
Es muß lediglich einer zu Ihrer Fernsteuerung passender Empfänger verbaut werden.
Nach Programmierung Ihres Sensers ist das Modell sofort einsatzbereit.
Gerne verbauen wir den Empfänger und programmieren das Modell auf Ihren Sender (es entstehen zusätzliche Kosten für das Material und Durchführung).
Beschreibung Heli allgemein:
Der SAB Goblin 500 im Komplettset. Bewehrte Komponenten für höchste Ansprüche optimal aufeinander abgestimmt.
- SAB Goblin 500
- BEASTX Microbeast Flybarlesssystem
- 500mm SAB Hauptrotorblätter
- 80mm SAB Heckrotorblätter
- Kontronik KOBY 90 LV 90A Brushless Regler
- Scorpion HK-4015-1070KV Brushless Motor
- 3x Taumelscheibenservo Align DS 515MG
- Heckservo Align DS655 (Heckservo)
Details:
Technische Daten SAB Goblin 500
· Hauptrotordurchmesser: 1136mm (mit 500 mm Hauptrotorblättern)
· HPS Rotorkopf (Flybarless)
· Hauptrotorblattlänge: 470-500mm
· Heckrotordurchmesser 226mm
· Heckrotorblattlänge: 80mm
· Durchmesser hole Hauptrotorwelle 10mm
· Durchmesser Heckrotorwelle 5mm
· Durchmesser Blattlagerwelle 8mm
· Übersetzung: 6.9-11:1
· Gewicht incl. Elektronik: ca. 1900g (ohne Lipos)
Highlights SAB Goblin 500
· gedämpfter Heckrotor gegen Vibrationen
· volles Carbon Chassi und einzigartiges Carbon Heckrohr
· Lipo Schnellverschlusssystem (Akkurutsche)
· Heckanlenkung verläuft innerhalb des Heckrohres
· schrägverzahntes Getriebe für extreme Kraftübertragung und leises Betriebsgeräusch
Flybarlesssystem BEASTX Microbeast BXM76000
MICROBEAST besitzt ein Gehäuse in Aluminium-Mischbauweise. Mit seinen geringen Abmessungen kann es in nahezu jedem Modellhelikopter verbaut werden. Der Einbau des MICROBEAST kann sowohl horizontal als auch vertikal erfolgen.
Die Sensorik basiert auf neuester MEMS-Technologie. Durch die Software mit ihrer ausgeklügelten Sensor-Datenverarbeitung ist der Einbau in Elektro- & Verbrenner-Modellhelikoptern möglich.
MICROBEAST lässt sich mit einem optionalen Adapterkabel auch nur als Heckgyro einsetzen. Dies empfiehlt sich insbesondere für Umsteiger vom herkömmlichen Paddel-System die sich langsam an den RIGID-Betrieb mit der 3 Achsen- Lösung (3G-Gyro Mode) herantasten wollen.
Das durchdachte und einfache Setup geht schnell von der Hand und es ist weder eine teure Programmierbox noch ein Computer notwendig. So können auch auf dem Flugfeld noch viele Einstellungen einfach und problemlos geändert werden.
Der im MICROBEAST integrierte Taumelscheibenmischer ermöglicht darüber hinaus die Verwendung von einfachen Fernsteuersystemen welche keine eigene Taumelscheibenmischung besitzen (NO-MIX).
MICROBEAST kann viele Arten von Summensignalen verarbeiten (PPM / S-BUS / Spektrum). Mit dem optionalen Spektrum-Satelliten-Adapter ist der Einbau in Indoor-Modellhelikoptern auch ohne großes Kabelaufkommen möglich.
Updates und weitergehende Einstellmöglichkeiten (Setups) können bequem mit dem optionalen USB-Interface „USB2SYS" über die BEASTLINK-Schnittstelle durchgeführt werden. Software für Windows & Mac gibt es kostenlos zum download unter www.BEASTX.com
Technische Daten:
Betriebsspannung: 3,5V...8,5 V DC (Lipo 2S möglich)
Prozessor: 32Bit ARM
Analogverarbeitung: 17Bit
Sensorik: 3 MEMS Winkel-Beschleunigungssensoren
Wählbare Servo-Neutralimpulsweite:
Heck: 760µs / 960µs / 1520µs
Wählbare Servo-Impulsrate:
Heck: 50 Hz / 165 Hz / 270 Hz / 330 Hz
Taumelscheibe: 50 Hz / 65 Hz / 120 Hz / 200 Hz
Taumelscheiben Typ einstellbar:
Mechanisch / 90° / 120° / 140°
Abmessungen: 34 x 25 x 13,5 mm
Gewicht ohne Kabel: ca. 20 g
Taumelscheibenservos DS515M Digital Servo mit Metallgetriebe:
Funktionen DS 515M:
● Coreless Motor Design für hohe Geschwindigkeit, hohe Effizienz und geringer Stromverbrauch.
● 10 Bit Signal-Auflösung für ruckellose Bewegungen.
● Hohe Geschwindigkeit und gleichzeitig viel Kraft.
● Mittelteil aus einer Aluminium-Legierung für eine gute Wärmeableitung.
● Unterstützt digitale und analoge Signal.
● Metallgetriebe
Technische Daten:
● Stellkraft: 4.0kg.cm(4.8V) / 5.0kg.cm(6.0V)
● Geschwindigkeit: 0.12sec/60°(4.8V) / 0.10sec/60°(6.0V)
● Betriebsspannung: DC 4.8-6V
● Temperaturbereich: -20°C~+60°C
● Abmessungen: 35 x 15.1 x 29mm
● Gewicht: 29g
● 1520μs standard Band
Heckservo DS655 Ultra Speed Digital Servo (Heckservo):
● Stellkraft: 4,5kg.cm(4.8V) / 5,5kg.cm(6.0V)
● Geschwindigkeit: 0.06sec/60°(4.8V) / 0.05sec/60°(6.0V)
● Betriebsspannung: DC 4.8-6V
● Temperaturbereich: -20°C~+60°C
● Abmessungen: 40,1 x 20,1 x 37,3mm
● Gewicht: 56g
● 1520μs standard Band
Brushlessmotor Scorpion HK-4015 1070KV
Scorpion Competition Series Brushless Motoren werden nur aus den hochwertigsten Materialien gefertigt. Ihr einzigartiges Design bietet eine kompromisslose Lösung für alle Modellflieger, die sowohl Leistung und Qualität als auch einen fairen Preis fordern.
Die Motoren wurden designed um viel Power, Effektivität und perfekte Kühlung miteinander zu vereinen. Ihre solide 5mm Motorwelle ist austauschbar und dreifach kugelgelagert, was ihr mehr Stabilität und Laufruhe gibt. Die Scorpion HK-40XX Serie kann ausschließlich hinter dem Kopfspant / Motorträger montiert werden.
Bei der Herstellung der Gehäuseteile bearbeiten qualifizierte Ingenieure eine hochwertige Alu-Legierung auf ultramodernen CNC Fräsmaschinen im Scorpion Werk in Hong Kong. Diese Teile werden anschließend in einem speziellen Verfahren goldfarben eloxiert, um ihnen eine langlebigen und edlen Glanz zu verleihen.
Die Statoren werden aus 0,2mm Trafoblechen hergestellt, um einen maximalen Wirkungsgrad zu erreichen und Stromwirbelverluste zu reduzieren. Ferner werden sie mit Epoxid Harz ummantelt, um sie gegen Kurzschlüsse optimal zu isolieren. Sie werden mit äußerst hochwertigen Draht gewickelt, welcher Temperaturen bis 180°C standhält. Scorpion setzt ausschließlich Hochleistungsmagnete des im N-50EH Stil ein, welche einer Betriebstemperatur von bis zu 200°C standhalten. Somit ist es nahezu unmöglich Scorpion Motoren in ihrem Einsatzgebiet durchzubrennen.
Scorpion Brushless Motoren sind die richtige Wahl für Leistungshungrige Piloten, die ihrem Motor einfach mehr abverlangen. Alle Scorpion Motoren der HK-40XX Serie werden mit bereits angelöteten 4,0mm Goldkontaktsteckern und passenden 4,0mm Goldkontaktbuchsen ausgeliefert.
Technische Daten:
Kontronik Koby 90 LV 90A Brushless Regler
Die KOBY Serie stellt die neuste Generation der KONTRONIK Brushless Regler dar. Als Nachfolger der erfolgreichen JAZZ Familie garantiert auch der KOBY ungetrübten Flugspaß bei gewohnter KONTRONIK Zuverlässigkeit.
Die KOBY Regler sind mit einem starken 3 A Dauerstrom belastbaren BEC ausgestattet, das mit 10 A Spitzenbelastbarkeit für alle Anwendungen bestens gerüstet ist. Das getaktete BEC, das wie gewohnt extrem störungsarm ist, ist zudem im Bereich von 5,6 – 8 V Ausgangsspannung verstellbar. Damit werden auch Servos der neusten Generation kraftvoll versorgt.
Die bekannte Modusprogrammierung sorgt bei den KOBY Reglern für eine einfache Bedienung. Sie bietet mit einem Segelflug, einem Motorflug und einem Helikopter Modus die wichtigsten voreingestellten Parameter, um schnell abheben zu können. Natürlich brilliert der Heli-Modus durch eine feinfühlige Drehzahlregung.
Vielfältige, intelligente Schutzfunktionen sorgen dafür, dass Modell und Regler stets bestmöglich geschützt werden. So werden Sie mit dem KOBY lange Spaß haben und können sich vollkommen auf den Flug konzentrieren.
Eine Neuheit bei KONTRONIK ist, dass die KOBY Regler online-update-fähig (OUF) sind. Über die neue PROGDISC kann der Regler nicht nur programmiert werden, sie ist auch das Interface zum PC, um die neuesten Softwareupdates bequem von zu Hause aufspielen zu können.
Spezifikationen KOBY 90 LV:
Lieferumfang:
Goblin 500 Combo fertig gebaut und eingestellt mit :
1x 500mm SAB Hauptrotorblätter
1x 80mm SAB Heckrotorblätter
1x BEASTX Microbeast Flybarlesssystem
1x Kontronik KOBY 90 LV 90A Brushless Regler
1x Scorpion HK-4015-1070KV Brushless Motor
3x Taumelscheibenservo Align DS 515MG
1x Heckservo Align DS655
1x ALU Servohebel SET F # HSP61012
Gerne verbauen wir den Empfänger und programmieren das Modell auf Ihren Sender (es entstehen zusätzliche Kosten für das Material und Durchführung).
Dieser Modellhubschrauber ist für Kinder unter 14 Jahren nicht geeignet!
Product | Description | Order now | |||
---|---|---|---|---|---|
H0474-S |
SAB Goblin 500 / 570 Radius Arm HPS3
In stock, available
Within DE: 2 Business Days **
|
31,00 €* | |||
H0204-S |
SAB Goblin 500 RADIUS ARM HPS
Sold out, no longer available |
32,00 €* | |||
HC400-S |
SAB Goblin Flanged bearing Ø2,5 x Ø6 x2,6
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |||
HC146-S |
SAB Goblin Cup Point Set Screws M2,5x15 (5pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0066-S |
SAB Goblin Plastic ball linkages (10pcs)
In stock, available
Within DE: 2 Business Days **
|
11,00 €* | |||
HC032-S |
SAB Goblin SOCKET HEAD CAP M2,5X18
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
HC028-S |
SAB Goblin Socket Head Cap M2,5x15
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0205-S |
SAB Goblin RADIUS PLASTIC ARM
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |||
HC026-S |
SAB Goblin Socket Head Cap M2,5x12
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0206-S |
SAB Goblin 500/570 Aluminum Center Hub
In stock, available
Within DE: 2 Business Days **
|
46,00 €* | |||
HC206-S |
SAB Goblin Metric Hex NYLON Nuts M3 H4 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
4,50 €* | |||
HC172-S |
SAB Goblin Wascher Ø2,5 x Ø4 x 0,3 (10 pcs)
In stock, available
Within DE: 2 Business Days **
|
4,50 €* | |||
HC330-S |
SAB Goblin 500 ORING DAMPER
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |||
H0425-S |
SAB Goblin 500/570 Delrin Tecno Dampener – HPS
Sold out, no longer available |
10,00 €* | |||
H0064-S |
SAB Goblin 380 / 630 / 700 / 770 / Kraken UNIBALL (5pcs)
Currently sold out |
13,00 €* | |||
H0213-S |
SAB Goblin 500 SPINDLE
In stock, available
Within DE: 2 Business Days **
|
11,00 €* | |||
H0251-S |
SAB Goblin 500 Servo Block
In stock, available
Within DE: 2 Business Days **
|
6,00 €* | |||
HC082-S |
SAB Goblin Socket Head Cap M3x20 Should (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
6,50 €* | |||
HC004-S |
SAB Goblin Socket Head Cap M2x6 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0477-S |
SAB Goblin 500 / 570 New Swash Plate Set
Sold out, no longer available |
58,00 €* | |||
HC044-S |
SAB Goblin Socket Head Cap M3x6
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0203-S |
SAB Goblin 500 Aluminum Main Blade Grip Arm
In stock, available
Within DE: 2 Business Days **
|
21,00 €* | |||
H0065-S |
SAB Goblin UNIBALL M3x4 Ø5 H3 (5pcs)
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |||
H0237-S |
SAB Goblin 500 LINKAGE HPS
Currently sold out |
14,00 €* | |||
H0225-S |
SAB Goblin 500 SPACER 8x12,5x05
In stock, available
Within DE: 2 Business Days **
|
5,00 €* | |||
HC417-S |
SAB Goblin 500 Bearing Ø8 x Ø14 x 4 (2 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0202-S |
SAB Goblin 500 Main Blade Grip
Sold out, no longer available |
53,00 €* | |||
HC050-S |
SAB Goblin Socket Head Cap M3x8 (8pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
LX1019 | Not available anymore: LYNX GOBLIN 500/570 Ultra Swash Plate - Silver | ||||
HC212-S |
SAB Goblin Metric Hex NYLON Nuts M4 H5 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
4,50 €* | |||
H0265-S |
SAB Goblin 500 Spacer Ø4 x Ø18 x1
In stock, available
Within DE: 2 Business Days **
|
6,00 €* | |||
HC111-S |
SAB Goblin Socket Head Cap Shouldered M4x24
In stock, available
Within DE: 2 Business Days **
|
6,50 €* | |||
HC437-S |
SAB Goblin 500 Thrust bearing Ø8x Ø14 x 4 (2pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
HC193-S |
SAB Goblin Wascher Ø6,1 x Ø12 x 1 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
LX1022 | Not available anymore: LYNX GOBLIN 500/570 Ultra Swash Plate - Service Bag | ||||
HC122-S |
SAB Goblin Button Head Socket Cap M6x10 (8pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0063-S |
SAB Goblin 630 / 700 / 770 UNIBALL M3x4 Ø5 H18
In stock, available
Within DE: 2 Business Days **
|
6,00 €* |
Product | Description | Order now | |
---|---|---|---|
H0211-S |
SAB Goblin 500 Motor Mount
In stock, available
Within DE: 2 Business Days **
|
21,00 €* | |
H0255-S |
SAB Goblin 500 Aluminum Finishing Washer M2.5
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |
HC020-S |
SAB Goblin Socket Head Cap M2,5x8 (8pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC152-S |
SAB Goblin Cone Point Set Screws M4x4
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0215-24-S |
SAB Goblin 500 Motor Pulley Z 24
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
H0215-23-S |
SAB Goblin 500 Motor Pulley Z 23
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
H0215-22-S |
SAB Goblin 500 Motor Pulley Z 22
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
H0215-20-S |
SAB Goblin 500 PULLEY Z 20
Currently sold out |
15,00 €* | |
H0215-21-S |
SAB Goblin 500 Motor Pulley Z 21
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
H0215-18-S |
SAB Goblin 500 Motor Pulley Z 18
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
H0215-17-S |
SAB Goblin 500 Motor Pully Z 17
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
H0215-16-S |
SAB Goblin 500 Motor Pulley Z 16
Currently sold out |
15,00 €* | |
H0215-19-S |
SAB Goblin 500 Motor Pulley Z 19
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
XN-LG-4025-1120-B |
XNOVA Lightning 4025-1120KV shaft B
Currently sold out |
274,90 €* | |
HC132-S |
SAB Goblin Flat Head Socket Cap M3x5 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC344-S |
SAB Goblin 500 Sport Motor Belt 204T
In stock, available
Within DE: 2 Business Days **
|
15,00 €* | |
HC340-S |
SAB Goblin 500 Motor Belt 195 - 3 - 9
Sold out, no longer available |
15,00 €* | |
HC184-S |
SAB Goblin Wascher Ø4,3 x Ø11 x 1 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
4,50 €* | |
H0214-S |
SAB Goblin 500 Aluminum One Way Pulley Z48
In stock, available
Within DE: 2 Business Days **
|
29,00 €* | |
HC154-S |
SAB Goblin Cup Point Set Screws M4x15 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC316-S |
SAB Goblin 500 Spring
In stock, available
Within DE: 2 Business Days **
|
8,00 €* | |
HC212-S |
SAB Goblin Metric Hex NYLON Nuts M4 H5 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
4,50 €* | |
HC418-S |
SAB Goblin ABEC-5 Flanged bearing Ø8 x Ø12 x 3,5 (2pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC200-S |
SAB Goblin Metric Hex NYLON Nuts M2,5 H3,5 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0210-S |
SAB Goblin 500 Pinion Z18
Sold out, no longer available |
17,00 €* | |
HC440-S |
SAB Goblin 500 One Way Bearing Ø8 x Ø12 x 12
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0221-S |
SAB Goblin 500 econdary Shaft
In stock, available
Within DE: 2 Business Days **
|
10,00 €* | |
H0212-S |
SAB Goblin 500 Aluminum Frame Tray
In stock, available
Within DE: 2 Business Days **
|
38,00 €* | |
HC419-S |
SAB Goblin 500 Bearing Ø8 x Ø16 x 5 (2 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0635-S |
SAB Goblin 500 Sport Main Structure
In stock, available
Within DE: 2 Business Days **
|
27,00 €* | |
HC228-S |
SAB Goblin SHIMS Ø8X Ø14 X 0,2
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0218-S |
SAB Goblin 500 Main Pulley Z 18
In stock, available
Within DE: 2 Business Days **
|
21,00 €* | |
HC031-S |
SAB Goblin SHOULDER SOCKET HEAD CAP M2,5X15
In stock, available
Within DE: 2 Business Days **
|
6,50 €* | |
H0208-S |
SAB Goblin 500 Servohalterung
In stock, available
Within DE: 2 Business Days **
|
44,00 €* | |
H0636-S |
SAB Goblin 500 Sport Servo Support
Sold out, no longer available |
22,00 €* | |
H0263-S |
SAB Goblin 500 Aluminum Frame Support
Currently sold out |
15,00 €* | |
HC206-S |
SAB Goblin Metric Hex NYLON Nuts M3 H4 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
4,50 €* | |
H0423-S |
SAB Goblin 500/570 CNC Delrin Main Gear
Sold out, no longer available |
40,00 €* | |
H0207-S |
SAB Goblin 500 Aluminum Main Shaft Bearing Support
In stock, available
Within DE: 2 Business Days **
|
18,00 €* | |
H0223-S |
SAB Goblin 500 SPACER MAIN SHAFT
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |
HC234-S |
SAB Goblin Shims Ø10x Ø16 x 0,1 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC082-S |
SAB Goblin Socket Head Cap M3x20 Should (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
6,50 €* | |
H0222-S |
SAB Goblin 500 MAIN SHAFT
In stock, available
Within DE: 2 Business Days **
|
17,00 €* | |
H0643-S |
SAB Goblin 500 Sport Carbon Fiber Antirotation Guide
In stock, available
Within DE: 2 Business Days **
|
10,00 €* | |
H0244-S |
SAB Goblin 500 Carbon Fiber Swashplate Antirotation
In stock, available
Within DE: 2 Business Days **
|
10,00 €* | |
HC018-S |
SAB Goblin Socket Head Cap M2,5x6 (8pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0224-S |
SAB Goblin 500 Carbon Fiber Sensor Support
In stock, available
Within DE: 2 Business Days **
|
13,00 €* | |
H0287-S |
SAB Goblin 500 Spacer Set
In stock, available
Within DE: 2 Business Days **
|
14,00 €* |
Product | Description | Order now | |||
---|---|---|---|---|---|
HC019-S |
SAB Goblin SOCKET HEAD CAP M2,5X6
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0050-S |
SAB Goblin 630 / 700 / 770 ANTENNA GUIDE
Sold out, no longer available |
4,00 €* | |||
HC022-S |
SAB Goblin Socket Head Cap M2,5x10
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0634-S |
SAB Goblin 500 Sport Carbon Fiber Main Frame
In stock, available
Within DE: 2 Business Days **
|
46,00 €* | |||
H0322-S |
SAB Goblin 500 MAIN FRAME 2 mm
Sold out, no longer available |
51,00 €* | |||
H0961-S |
SAB Goblin 500 Sport 2018 Frame
Currently sold out |
22,00 €* | |||
H0638-S |
SAB Goblin 500 Sport Plastic Front Landing Gear Support
Currently sold out |
10,00 €* | |||
H0652-S |
SAB Goblin 500 Sport Carbon Fiber Landing Gear
Sold out, no longer available |
51,00 €* | |||
H0654-S |
SAB Goblin 500 Sport Carbon Fiber Landing Gear
Currently sold out |
24,00 €* | |||
H0350-S |
SAB Goblin 500 / 570 Plastic Landing Gear Support (1pc)
Sold out, no longer available |
9,00 €* | |||
H0262-S |
SAB Goblin 500 Plastic Landing Gear Support
Sold out, no longer available |
10,00 €* | |||
H0285-S |
SAB Goblin 500 Carbon Fiber Landing Gear Red
Sold out, no longer available |
11,00 €* | |||
H0385-S |
SAB Goblin 500 / 570 LANDING GEAR CARBON PARTS
Sold out, no longer available |
20,00 €* | |||
H0241-S |
SAB Goblin 500 Carbon Fiber Landing Gear Yellow
Sold out, no longer available |
13,00 €* | |||
H0386-S |
SAB Goblin 570 KIT LANDING GEAR
Sold out, no longer available |
31,00 €* | |||
H0637-S |
SAB Goblin 500 Sport Plastic Landing Gear
Currently sold out |
18,00 €* | |||
H0646-S |
SAB Goblin 500 Sport 2018 Front Landing Gear Support Upgrade
Currently sold out |
10,00 €* | |||
HC020-S |
SAB Goblin Socket Head Cap M2,5x8 (8pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0255-S |
SAB Goblin 500 Aluminum Finishing Washer M2.5
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |||
H0258-S |
SAB Goblin 500 Plastic Battery Support
In stock, available
Within DE: 2 Business Days **
|
31,00 €* | |||
H0252-S |
SAB Goblin 500 Carbon Fiber Battery Tray
In stock, available
Within DE: 2 Business Days **
|
21,00 €* | |||
H0239-S |
SAB Goblin 500 Spacer 54 MM
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |||
HC026-S |
SAB Goblin Socket Head Cap M2,5x12
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0075-S |
SAB Goblin Carbon Fiber SERVO SPACER (10pcs)
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |||
H0064-S |
SAB Goblin 380 / 630 / 700 / 770 / Kraken UNIBALL (5pcs)
Currently sold out |
13,00 €* | |||
HC005-S |
SAB Goblin Button Cap M2x5 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
HC004-S |
SAB Goblin Socket Head Cap M2x6 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
HC200-S |
SAB Goblin Metric Hex NYLON Nuts M2,5 H3,5 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
H0256-S |
SAB Goblin 500 Aluminum Battery Block
In stock, available
Within DE: 2 Business Days **
|
10,00 €* | |||
HC028-S |
SAB Goblin Socket Head Cap M2,5x15
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |||
LX0500 | Not available anymore: LYNX GOBLIN 500 Ultra Landing Gear Support - Silver |
Product | Description | Order now | |
---|---|---|---|
HC018-S |
SAB Goblin Socket Head Cap M2,5x6 (8pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0281-S |
SAB Goblin 500 Carbon Fiber Vertical Fin Red
Sold out, no longer available |
13,00 €* | |
H0242-S |
SAB Goblin 500 Carbon Fiber Tail Fin Yellow
Sold out, no longer available |
13,00 €* | |
H0621-S |
SAB Goblin 500 Sport Carbon Fiber Tail Fin
Currently sold out |
14,00 €* | |
H0298-S |
SAB Goblin 570 Carbon Fiber Tail Boom Block
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |
HC026-S |
SAB Goblin Socket Head Cap M2,5x12
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC148-S |
SAB Goblin Cone Point Set Screws M3x8 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0066-S |
SAB Goblin Plastic ball linkages (10pcs)
In stock, available
Within DE: 2 Business Days **
|
11,00 €* | |
HC235-S |
SAB Goblin 500 Tail push rod Ø4 x Ø2,5 x 596
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |
H0078-S |
SAB Goblin 630 / 700 / 770 Washer Ø3,1 x Ø12 x 1.8 (4pcs)
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |
H0296-S |
SAB Goblin 570 BLOCK NYLON SCREWS
In stock, available
Within DE: 2 Business Days **
|
14,00 €* | |
HC412-S |
SAB Goblin 500 Flanged bearing Ø5 x Ø13 x 4 (4 pcs)
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |
HC242-S |
SAB Goblin THREADED RODS M2.5 X 40 X 3PCS
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |
HC342-S |
SAB Goblin 500 Tail Belt 1530 - HTD - 4,5
Sold out, no longer available |
21,00 €* | |
HC206-S |
SAB Goblin Metric Hex NYLON Nuts M3 H4 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
4,50 €* | |
H0230-S |
SAB Goblin 500 Aluminum Tail Pulley Z 21
In stock, available
Within DE: 2 Business Days **
|
21,00 €* | |
HC164-S |
SAB Goblin Vite Nylon Esa M8x14 (4pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC132-S |
SAB Goblin Flat Head Socket Cap M3x5 (5 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0229-S |
SAB Goblin 500 Aluminum Bell Crank Support
In stock, available
Within DE: 2 Business Days **
|
10,00 €* | |
HC020-S |
SAB Goblin Socket Head Cap M2,5x8 (8pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0233-S |
SAB Goblin 500 Tail Pitch Slider Assembly
In stock, available
Within DE: 2 Business Days **
|
22,00 €* | |
H0394-S |
SAB Goblin 570 CARBON ROD SUPPORT
In stock, available
Within DE: 2 Business Days **
|
16,00 €* | |
HC416-S |
SAB Goblin 500 Flanged bearing Ø7x Ø11 x 2,5 (2 pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0216-S |
SAB Goblin 500 Spacer 26mm
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |
H0243-S |
SAB Goblin 500 Carbon Fiber Tail Side Plate
Sold out, no longer available |
8,00 €* | |
H0622-S |
SAB Goblin 500 Sport Carbon Fiber Tail Boom Yellow
Currently sold out |
66,00 €* | |
H0623-S |
SAB Goblin 500 Sport Carbon Fiber Tail Boom White
Sold out, no longer available |
66,00 €* | |
H0959-S |
SAB Goblin 500 Sport 2018 Yellow Boom
Sold out, no longer available |
62,00 €* | |
H0261-S |
SAB Goblin Plastic Tail Linkage
In stock, available
Within DE: 2 Business Days **
|
8,00 €* | |
HC004-S |
SAB Goblin Socket Head Cap M2x6 (10pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0234-S |
SAB Goblin 500 Plastic Bell Crank LevelerR
In stock, available
Within DE: 2 Business Days **
|
14,00 €* | |
H0227-S |
SAB Goblin 500 Steel Tail Shaft
In stock, available
Within DE: 2 Business Days **
|
17,00 €* | |
H0220-S |
SAB Goblin 500 Steel Tail Spidle Shaft
In stock, available
Within DE: 2 Business Days **
|
11,00 €* | |
H0249-S |
SAB Goblin 500 Carbon Fiber Tail Locking Element
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |
HC062-S |
SAB Goblin Socket Head Cap M3x12
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
HC400-S |
SAB Goblin Flanged bearing Ø2,5 x Ø6 x2,6
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |
HC032-S |
SAB Goblin SOCKET HEAD CAP M2,5X18
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0007-S |
SAB Goblin Aluminum Finishing Washers (10pcs)
In stock, available
Within DE: 2 Business Days **
|
7,00 €* | |
H0219-S |
SAB Goblin Fireball Spacer 4 x 6,9 x 0,4mm
In stock, available
Within DE: 2 Business Days **
|
5,00 €* | |
HC044-S |
SAB Goblin Socket Head Cap M3x6
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0236-S |
SAB Goblin 500 Aluminum Tail Blade Grip
Sold out, no longer available |
28,00 €* | |
HC434-S |
SAB Goblin ABEC-5 Thrust bearing Ø4 x Ø9 x 4 (2pcs)
In stock, available
Within DE: 2 Business Days **
|
5,50 €* | |
H0062-S |
SAB Goblin 630 / 700 / 770 SPACER Ø7 x Ø9 x 0,5
In stock, available
Within DE: 2 Business Days **
|
6,00 €* | |
HC403-S |
SAB Goblin 500 Bearing Ø4 x Ø9 x 2,5 (4 pcs)
In stock, available
Within DE: 2 Business Days **
|
9,00 €* | |
H0064-S |
SAB Goblin 380 / 630 / 700 / 770 / Kraken UNIBALL (5pcs)
Currently sold out |
13,00 €* | |
HC074-S |
SAB Goblin Socket Head Cap M3x16 Special (2pcs)
In stock, available
Within DE: 2 Business Days **
|
6,50 €* |