Deutsch
English
- Sie sind hier:
- Ersatzteile
- Ersatzteile Hubschrauber
- SAB Goblin
- SAB Goblin 420 Sport
Xnova XTS 2820-890kv 10P
Xnova XTS-Motoren - 100% handgewickelt mit Einzeldraht! Power pur.
Für Helikopter mit 350 bis 380 mm Blattlänge und den Betrieb an 6S bietet dieser Motor ein hervorragendes Leistungsgewicht.
Designt für kraftvolle 3D Flüge und exzellente Flugzeiten. Speziell entwickelt für 380ger Helis wo es auf ein optimales Leistungs/Gewichts- Verhältnis ankommt.
Xnovamotors specifications are real datas and not modified, we convince you by flight-performance and not datasheets.
| Slots & Poles | 12n10p |
| Winding T | 10YY |
| rpm/V | 890 |
| Volt (V) | 10 / 22.2 |
| Io(A) | 1.2 / 1.7 |
| Rm (mohm) | 34 / 34 |
| Weight (without connector) (g) | 140 |
| Body Length (no shaft) mm | 40.7 |
| Diameter (mm) | 36 |
| Shaft Length (mm) (Details pictures) | A |
| Shaft Dia. (mm) | 5 |
| Mounting Holes CTC Distance (mm) | 25 |
| Mounting Screw | M3x0.5 |
| Max Eff. Curr. | 17.77 / 31.51 |
| Max Eff. | 86.49 / 89.21 |
| Kt (Nm/A | 0.0107 |
| Km (Nm/sqrt(w)) | 0.0550 |
| Max Continuous Power(Watts) | 1080 |
| Peak Continuous Power(Watts) (2 sec) | 1360 |
| Max Continuous Current(Amps) | 48 |
ESC Settings
Xnova XTS motors are not picky about ESC settings. Most default settings are just fine, but there are some things to consider.
Xnova XTS motors make best power with low timing. You may want to set timing at around 5 to maintain power and efficiency, then play with PWM to adjust temperature of ESC and motor. As you already found out the ESC gets warmer as you increase the frequency while the motor gets cooler, and vice versa.
Heli specific setup:
Governor setup is critical for a constant headspeed. Too low a throttle setpoint will overstress the entire power system. Pulling 100A at 50% duty cycle on the esc produces very high current ripple and high peak currents in the system. This reduces efficiency a great deal. Also remember that 50% throttle on the transmitter may or may not be 50% throttle (duty cycle) in the ESC. These values may not be directly related.
For a 3D heli setup, the gearing, motor kv, and headspeed should be chosen so that at the highest power draw the ESC still has some "headroom" to operate.
Lieferumfang:
Motor Xnova XTS 2820-890kv 10P - Kabel sind angebracht
3 x 3mm Stecker
3 x 3mm Buchse
Lagernd, sofort lieferbar
Innerhalb DE: 2 Werktage **
Außerhalb DE: 5 Werktage**
.png){kind=icon}
Lagernd, sofort lieferbar
Innerhalb DE: 2 Werktage **
Außerhalb DE: 5 Werktage**
Lagernd, sofort lieferbar
Innerhalb DE: 2 Werktage **
Außerhalb DE: 5 Werktage**
Lagernd, sofort lieferbar
Innerhalb DE: 2 Werktage **
Außerhalb DE: 5 Werktage**