Live-Hobby.de/Spare Parts/Spare Parts Helicopter/soXos/soXos 600 Spare Parts products

3x THETA RAZOR-DH1 Low-Profile Brushless HV Servo SET with NFC BLUE 323,90 €

Mon, 13 Jul 2026 12:34:47 +0200

THETA RAZOR-DH1 Low-Profile Brushless HV Servo with NFC - blue version

NFC programmable brushless HV servo in the 40 mm low-profile size.
The application range of the servo is versatile from helicopter swashplate servo from the 550 up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.
Due to the SANWA SSR compatibility, the advantages of Sanwa Super Response transmission can be used in the RC car sector.

Specifications:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,090 (secS/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	24 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,092 (sec/60°)
Speed at 6V	0,081 (sec/60°)
Speed at 7,4V	0,072 (sec/60°)
Speed at 8,4V	0,063 (sec/60°)

Torque at 5V	30 (kg/cm)
Torque at 6V	34 (kg/cm)
Torque at 7,4V	37 (kg/cm)
Torque at 8,4V	40 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-DH1 blue
with accessories

Azure Power Carbon Rotorblade 600mm 95,90 €

Sun, 26 Jul 2026 12:22:54 +0200

Azure Power Carbon Rotorblade 600mm

AZ600 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.

In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.

The AZ600 will unleash the full potential of your helicopter.

Technical Specifications:

Length:	600mm
Blade Grip:	>12mm
Hole:	4mm
Weight approx.:	142g
Width:	53-59,5mm
Airfoil:	Symmetric

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

soXos Blade Holder Tail Rotor # 8126-1 20,10 €

Mon, 04 May 2026 15:06:38 +0200

Blade Holder Tail Rotor

Includes:
1 x Blade Holder Tail Rotor (Nr.1704)
1 x Ball Bearing 5x10x4 (Nr.68)

Spare part suitable for:
soXos 550 / 600 / Strike 6.1 / 700 / DB7 / Strike 7 / Strike 7.1 / Strike 7.1 light / 800

soXos Blade Holder Tail Rotor # 8126-2 20,10 €

Mon, 13 Jul 2026 14:17:53 +0200

Blade Holder Tail Rotor

Includes:
1 x Blade Holder Tail Rotor (Nr.1704)
1 x Ball Bearing 6x10x3 (Nr.74g)

Spare part suitable for:
soXos 550 / 600 / Strike 6.1 / 700 / DB7 / Strike 7 / Strike 7.1 / Strike 7.1 light / 800

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Mon, 15 Jun 2026 12:08:22 +0200

Mikado Power Backup 50F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 50F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

THETA KENNY KO EDITION HV SERVO SET 3S 12V Brushless 3x THL787H 1x THL782H 519,90 €

Thu, 23 Jul 2026 14:51:57 +0200

THETA KENNY KO EDITION HV SERVO SET 3S 12V Brushless 3x THL787H 1x THL782H

This is a box set, which includes 3 THL787H cyclic servos and a THL782H tail servo. The servos were optimized in collaboration with multiple time world champion, Kenny Ko.

High Voltage 3S 12V
High Speed
Excellent Centering
Compatible with Futaba type horns/arms
Light Weight

The area of application of the servo set is for helicopters from the 550 to the 800+ size.

Specifications THL787H swashplate servo:


Motor	Brushless
Operating Voltage	7,5V bis 12,6V

Speed at 7,5V	0,09 (sec/60°)
Speed at 9,0V	0,08 (sec/60°)
Speed at 11,1V	0,07 (sec/60°)
Speed at 12,6V	0,06 (sec/60°)

Torque at 7,5V	24 (kg/cm)
Torque at 9,0V	28 (kg/cm)
Torque at 11,1V	33 (kg/cm)
Torque at 12,6V	38 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	1520µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications THL782H Tailservo:


Motor	Brushless
Operating Voltage	7,5V bis 12,6V

Speed at 7,5V	0,065 (sec/60°)
Speed at 9,0V	0,057 (sec/60°)
Speed at 11,1V	0,050 (sec/60°)
Speed at 12,6V	0,045 (sec/60°)

Torque at 7,5V	12 (kg/cm)
Torque at 9,0V	14 (kg/cm)
Torque at 11,1V	17 (kg/cm)
Torque at 12,6V	19 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	760µs
Maximale Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo THL787H
1x Servo THL782H

YGE Aureus 105 V2 Brushless ESC 105A 6-12S 5,5V-12V BEC # YGE-Aureus-105-V2 369,00 €

Mon, 18 May 2026 12:28:22 +0200

YGE Aureus 105 V2 brushless speed controller 105A for 6-12S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 6 to 12s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 10A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight: 146g
- Dimensions: 78 x 37 x 20mm
- Cable cross-section battery / motor: 4² / 4²

YGE Saphir 155 V2 Brushless ESC 155A 4-8S 5,5-12V BEC # YGE-Saphir-155-V2 359,00 €

Sun, 14 Jun 2026 19:14:13 +0200

YGE Saphir 155 V2 brushless speed controller 155A for 4-8S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 4 to 8s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 12A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight without/with cable: 122g/178g
- Dimensions: 82 x 43.5 x 26mm
- Cable cross-section battery / motor: 6² / 4²

soXos Main Blade Screws # 6033 4,20 €

Wed, 11 Mar 2026 00:16:12 +0100

Main Blade Screws

Spare part suitable for:
soXos 550 / 600 / Strike 6.1

soXos 12S Battery Plate Carbon # 7110 44,90 €

Mon, 13 Jul 2026 14:16:46 +0200

12S Battery Plate Carbon

Includes:
12S Battery Plate Carbon

Spare part suitable for:
soXos 600 / Strike 6.1 / 700 / DB7 / Strike7 / Strike7.1 / Strike7.1 light

soXos Thrust Bearing 8x14x5 # 6039 7,40 €

Wed, 11 Mar 2026 00:16:12 +0100

Thrust Bearing 8x14x5

Spare part suitable for:
soXos 550 / 600 / Strike 6.1

soXos Swash Control Arm # 6065 25,40 €

Wed, 11 Mar 2026 00:16:12 +0100

Swash Control Arm

Spare part suitable for:
soXos 550 / 600 / Strike 6.1

soXos Porch Carbon # 8136-1 52,90 €

Wed, 01 Apr 2026 12:16:19 +0200

Porch Carbon

Includes:
1 x Bolt (Nr.318)
1 x Bolt Box (Nr.319)
1 x Pressure Spring (Nr.350)
1 x Bolt Box Plate (Nr.546)
8 x Filister Head Screw M3x6 (Nr.155)
2 x Hex Socket Screw M3x10 (Nr.71)
1 x Porch Holder (Nr.547)
2 x Hex Socket Screw M3x25 (Nr.55)
1 x Carbon Porch Plate up (Nr.1551)
1 x Carbon Porch Plate down (Nr.1552)
4 x Round Head Screw M3x10 (Nr.1684)

Spare part suitable for:
soXos 550 / 600 / Strike 6.1 / 700 / DB7 / Strike 7 / Strike 7.1 / Strike 7.1 light / 800

soXos Spindle Shaft (2pcs) # 6048-1 8,50 €

Mon, 13 Jul 2026 15:50:32 +0200

Spindle Shaft (2pcs)

Spare part suitable for:
soXos 550 / 600 / Strike 6.1 / Strike 7.1 light

soXos Main Hub # 6064 29,60 €

Wed, 11 Mar 2026 00:16:11 +0100

Main Hub

Spare part suitable for:
soXos 550 / 600 / Strike 6.1

soXos Bolt Box Plate # 8133 21,10 €

Wed, 11 Mar 2026 00:16:15 +0100

Bolt Box Plate

Includes:
1 x Bolt Box Plate (Nr.546)
4 x Filister Head Screw M3x6 (Nr.155)
2 x Round Head Screw M3x10 (Nr.1684)

Spare part suitable for:
soXos 550 / 600 / Strike 6.1 / 700 / DB7 / Strike 7 / Strike 7.1 / Strike 7.1 light / 800

soXos Battery Plate # 8095 15,90 €

Thu, 16 Jul 2026 18:07:09 +0200

Battery Plate

Includes:
1 x Battery Plate (Nr.517)
3 x Hook & Loop fastener (Nr.177)
4 x Hook & Loop tape battery (Nr.178)

Spare part suitable for:
soXos 550 / 600 / Strike 6.1 / 700 / DB7 / Strike 7 / Strike 7.1 / Strike 7.1 light / 800

soXos Battery Rail Plate L/R # 8027 17,90 €

Mon, 13 Jul 2026 14:16:52 +0200

Battery Rail Plate L/R

Includes:
1 x Battery Rail Plate left (Nr.275)
1 x Battery Rail Plate right (Nr.276)
8 x Flanged Round Head Self Tapping Screw 3x7.5 (Nr.9)

Spare part suitable for:
soXos 550 / 600 / Strike 6.1 / 700 / DB7 / Strike 7 / Strike 7.1 / Strike 7.1 light / 800