Live-Hobby.de/Accessories/Drives/Brushless ESC & Motors/YGE products

YGE Cableset for 205HVT 29,90 €

Mon, 26 Jan 2026 18:13:52 +0100

* Cable set suitable for 205HVT and 205HVT Navy
* Consists of 2x BEC cables, throttle signal cable, and telemetry cable

YGE Aureus 185 Brushless ESC 185A with BEC # YGE-Aureus-185 569,00 €

Mon, 22 Jun 2026 20:47:32 +0200

Technical data:

6 - 12S Lipo
Current 185A, 270A chest
BEC 5.5V - 12V
BEC 10A continuous, 25A peak
"T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, and the proprietary YGE protocol for additional telemetry connections via, for example, YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2, and Spirit FBL.
Updateable (optional USB adapter available)
completely revised hardware and software (32-bit)
the PWM frequency is automatically adjusted to the needs of the motor
The specified current is the maximum continuous full throttle current with good cooling
Reverse regulation or shutdown in case of undervoltage
Current limiting
Undervoltage detection can be switched off
Speed control (Governor mode)
Soft start (sine or block commutation)
Super slow soft start for scale helicopters possible (60sec.)
Active freewheel, therefore unlimited partial load resistance
Automatic timing, or adjustable in 6 levels
EMK brake adjustable
F3A / Acro brake (brake force continuously adjustable in flight)
Min. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. power)
Speed limit: 240,000 rpm (2-pole)
Overtemperature / overload warning
Anti-flash: Reduces the switch-on spark
Basic programming via mode setup
Fine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available
Weight with cable: 269g
Dimensions: 96.5 x 47 x 28mm

Scope of delivery:
- YGE Aureus 185
- RC connection cable
- Fan
- Sticker
- Instructions

YGE Aureus 185 Brushless ESC 265A with Telemetry # YGE-Aureus-265 749,00 €

Thu, 05 Feb 2026 14:23:20 +0100

Technical Specifications:

6 - 14S Lipo
Current 265A, 400A chest
BEC 5.5V - 12V
BEC 15A continuous, 30A peak
"T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, and the proprietary YGE protocol for additional telemetry connections via, for example, YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2, and Spirit FBL.
Updateable (optional USB adapter available)
completely revised hardware and software (32-bit)
the PWM frequency is automatically adjusted to the needs of the motor
The specified current is the maximum continuous full throttle current with good cooling
Reverse regulation or shutdown in case of undervoltage
Current limiting
Undervoltage detection can be switched off
Speed control (Governor mode)
Soft start (sine or block commutation)
Super slow soft start for scale helicopters possible (60sec.)
Active freewheel, therefore unlimited partial load resistance
Automatic timing, or adjustable in 6 levels
EMK brake adjustable
F3A / Acro brake (brake force continuously adjustable in flight)
Min. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. power)
Speed limit: 240,000 rpm (2-pole)
Overtemperature / overload warning
Anti-flash: Reduces the switch-on spark
Basic programming via mode setup
Fine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available
Weight with cable: 265g
Dimensions: 112 x 54 x 31mm

Scope of delivery:
- YGE Aureus 265
- RC connection cable
- Fan
- Sticker
- Instructions

YGE Aureus 105 V2 Brushless ESC 105A 6-12S 5,5V-12V BEC # YGE-Aureus-105-V2 369,00 €

Mon, 18 May 2026 12:28:22 +0200

YGE Aureus 105 V2 brushless speed controller 105A for 6-12S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 6 to 12s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 10A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight: 146g
- Dimensions: 78 x 37 x 20mm
- Cable cross-section battery / motor: 4² / 4²

YGE Saphir 125 V2 Brushless ESC 125A 4-8S 5,5-12V BEC # YGE-Saphir-125-V2 309,00 €

Tue, 28 Jul 2026 17:26:25 +0200

YGE Saphir 125 V2 brushless speed controller 125A for 4-8S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 4 to 8s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 12A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight without/with cable: 80g/124g
- Dimensions: 76,5 x 34,5 x 19,5mm
- Cable cross-section battery / motor: 4² / 4²

YGE Saphir 155 V2 Brushless ESC 155A 4-8S 5,5-12V BEC # YGE-Saphir-155-V2 359,00 €

Sun, 14 Jun 2026 19:14:13 +0200

YGE Saphir 155 V2 brushless speed controller 155A for 4-8S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 4 to 8s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 12A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight without/with cable: 122g/178g
- Dimensions: 82 x 43.5 x 26mm
- Cable cross-section battery / motor: 6² / 4²

YGE Aureus 135 V2 Brushless ESC 6-12S # YGE-Aureus-135-V2 469,00 €

Tue, 14 Jul 2026 11:16:14 +0200

Technical Specifications:

BEC 5,5V - 12V
BEC 10A continuous, 25A Peak
"T" for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL
Update capable (optional USB-Adapter available)
entirely overhauled hard- and software (32-bit)
the PWM-frequency will be set automatically to the requirements of the motor
The specified current is the maximum continuous full power current
6 to 12s LiPo, incl under voltage protection by power reduction
Current limiting
Disconnectable under voltage detection
Electronic speed control (Governor- mode)
Soft start
super soft startup for scale-helicopters possible (60 sec.)
Active free-wheel, allowing unlimited part load operation
Automatic or 6 step adjustable timing
Adjustable EMK brake
F3A(Acro brake (brake force control infinitely adjustable)
Frequency: 16 to 32 kHz
Speed limit: 240.000 rpm (2- Poles)
Temperature and overload warning
Anti- flash: decreases the closing spark
Basic -Programming with mode programming
Fine adjustment and selection of telemetry log with the PC Setup
Suitable USB-adapter optionally available
dimensions (mm): 82 x 43,5 x 26
weight with cables: 178g

Content:
- YGE Aureus 135 V2
- RC-Connection Cable
- Torodial Core
- Fan
- Sticker
- Manual

YGE USB-Adapter # USB-Adapter 39,00 €

Sat, 18 Jul 2026 10:08:55 +0200

USB-interface for programming and updating all LVT- and HVT- speecontroller

Only for LVT- & HVT-controller!

YGE LVT / HVT Vstabi Adapter # LVT-Vstabi-Adapter 12,90 €

Tue, 28 Jul 2026 17:26:25 +0200

Adapter for using the LVT / HVT-controller with Vbar-telemetry
RPM-Output connection for using the vbar-governor
Length about 10cm

YGE 95LVT Brushless ESC 95A with Telemetry 2-6S # YGE-95LVT 229,00 €

Mon, 13 Jul 2026 01:33:59 +0200

"T" for Telemetry

Supported telemetry-protocols:

- Graupner HoTT V4
- Jeti ExBUS
- Multiplex Sensor BUS V2
- Mikado Vbar Control
- MSH Brain 2
- Spirit FBL
- YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky)

more protocols coming soon...

All usual informations as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characterisation depends on your transmitter/receiver.

Technical Specifications:

- Update capable (optional USB-Adapter available)

- entirely overhauled hard- und software (32-bit)

- the PWM-frequency will be set automatically to the requirements of the motor

- Current-limitation

- 2 to 6S LiPo

- super smooth sinus-startup

- adjustable HV-BEC from 5,5 to 9V

- high BEC-current rating: 8A permanent / 18A peak

- dimensions in mm: 78 x 32 x 15

- weight with / without cables: 78g / 93g

- basic settings via mode-setup

- BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software (optional USB-adapter available)

suitable for Protos 380, OXY4, Goblin 380/420/500, EXO 500, T-Rex 500, usw.

YGE 65LVT Brushless ESC 65A with Telemetry 2-6S # YGE-65LVT 189,00 €

Sun, 10 May 2026 20:34:57 +0200

"T" for Telemetry

Supported telemetry-protocols:

more protocols coming soon...

All usual informations as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characterisation depends on your transmitter/receiver.

Technical Specifications:

- Update capable (optional USB-Adapter available)

- entirely overhauled hard- und software (32-bit)

- the PWM-frequency will be set automatically to the requirements of the motor

- Current-limitation

- 2 to 6S LiPo

- super smooth sinus-startup

- adjustable HV-BEC from 5,5 to 9V

- high BEC-current rating: 8A permanent / 18A peak

- dimensions in mm: 64 x 26 x 9

- weight with / without cables: 30g / 45g

- basic settings via mode-setup

- BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software (optional USB-adapter available)

suitable for T-Rex 450/470, OXY3

YGE LVT / HVT Futaba, Spektrum, FrSky Telemetry Adapter # YGE-TEXY 49,00 €

Thu, 21 May 2026 14:40:19 +0200

The smart adapter cable TexY scales up the telemetry of our new generation of speedcontrollers (T-series) by three more manufacturer protocols:

* Futaba SBUS2
* FrSky S.Port
* Spektrum XBUS

The startup is Plug'n Play with Autodetect!

Only for LVT- & HVT-controller!

Weight: approx. 3g

Dimensions: 39 x 12 x 9mm

YGE 35LVT Brushless ESC 35A with Telemetry 2-6S # YGE-35LVT 119,00 €

Tue, 02 Jun 2026 14:36:17 +0200

"T" for Telemetry

Supported telemetry-protocols:

more protocols coming soon...

All usual informations as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characterisation depends on your transmitter/receiver.

Technical Specifications:

- Update capable (optional USB-Adapter available)

- entirely overhauled hard- und software (32-bit)

- the PWM-frequency will be set automatically to the requirements of the motor

- Current-limitation

- 2 to 6S LiPo

- super smooth sinus-startup

- adjustable HV-BEC from 5,5 to 8,4V

- high BEC-current rating: 5A permanent / 10A peak

- dimensions in mm: 34 x 23 x 8

- weight with / without cables: 13g / 25g

- basic settings via mode-setup

- BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software (optional USB-adapter available)

suitable for OXY2, T-Rex 250