Live-Hobby.de/Accessories/RC Electronics/Transmitter & Receiver/Transmitter products

Graupner mz-18 HOTT 9-channels (TX only) - used # S1005.77.GB 219,00 €

Thu, 09 Jul 2026 12:28:06 +0200

Graupner mz-18 HOTT 9-channels used Transmitter

Description:

Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.
Features:

HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4GHz technology
75 jump frequencies for safe transmission
9 channels
3.5" TFT colour touch display for easy operation
Intelligent speech output of telemetry data, warnings, alarms and Vario signal via loudspeakers or headphones
Real-time data transmission with optional sensors (Vario, GPS, fuel, temperature, voltage, current, speed and much more)
Teacher/student system wireless or wired
Binding of several receivers possible
Ball bearing billet units (total 8 units)
µSD card slot for model memory expansion and telemetry data recording
30 model memories
Model copy function
Updateable via USB
Model type: helicopter, flight model (normal or delta), glider model
Numerous servo settings (travel, limit, reverse, center position)
DualRate and Expo, separately adjustable for each flight phase
6 flight phases
Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
Pitch curves (7 points) separately adjustable for each flight phase
Gas curves (7 points) separately adjustable for each flight phase
Phase trims for pitch and gas
Swash plate limiter function
Swash plate mixing function
5 Linear mixer
3 curve mixer
Numerous model aircraft types from 1QR to 4-flap surfaces
Elevator: 1 HR, 2HR, V-tail
Snaproll function
Aileron differentiation, separately adjustable for each flight phase
Butterfly function

Security:

FHSS, frequency hopping over up to 75 channels
Maximum noise immunity through optimized frequency hopping, wide channel spread and antenna diversification
Intelligent data transmission with correction function
Extremely high range
Range test and warning function
low-voltage warning
Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional up to 2.5 V)
Numerous fail-safe functions
Keylog function to prevent unintentional menu changes

Precision:

Shorter response times adjustable (10ms period time)
No additional delays due to module processors. All hopping management is done directly from the 32-bit main processor.
Synchronous servo run possible by simultaneous control of the servo outputs in blocks of 4

Pilot feeling:

Largely instantaneous control reactions through direct processing
Telemetry evaluation in real time
Wireless teacher/student function

More characteristics:

Simple and extremely fast binding
Free channel assignment (channel mapping), transmitter and receiver mixing functions and all servo settings can be easily programmed
Binding of any number of receivers for channel expansion (max. 16 channels). The last bound receiver sends the telemetry data.
Future-proof due to update capability via USB interface

Specification:

Control function: 9
Temperature range : -10...+55 °C
Aerial length: 120 mm
All-up weight, approx.: 840 g
Frequency : 2400...2483,5 MHz
Range approx. : 4000 m
Dimensions (LxWxH): 194 x 287 x 112 mm
Modulation: FHSS
Charging rate : 510 mA
Operating voltage : 3,4...6,0 V

Box contents:

- Transmitter MZ-18 HoTT
- 2000mAh NiMH transmitter battery
- transmitter charger
- USB cable, USB PC interface adapter, USB adapter cable,
- transmitter belt
- Manual in English version
- German version of the manual can be downloaded

Mikado VBar Control Touch with VStabi EVO VLink Combo black/yellow # 05586 749,00 €

Mon, 15 Jun 2026 12:03:48 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black/green # 05587 749,00 €

Sun, 19 Jul 2026 20:11:02 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black/red # 05585 749,00 €

Thu, 30 Jul 2026 08:41:27 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black # 05559 699,00 €

Sun, 19 Jul 2026 14:37:05 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Spirit Wave PRO R/C System Radio - Red Anodized 1.679,90 €

Mon, 27 Jul 2026 21:16:11 +0200

Spirit Wave Pro is next generation Radio Control System utilizing the cutting edge technology. We aim to provide the best experience for R/C model enhusiast through seamless integration of all Spirit products.

It is designed for all R/C models and it's capabilities can be extended without a limitation. Easily by Updating to a new version, for free.

Spirit Wave Pro can be easily bound with Spirit W1 controllers or with Spirit RX receivers. Spirit W1 is our greatest unit for R/C helicopters and R/C airplanes with integrated Wave receiver.

Any third party controller can be connected through Spirit RX receiver by a standard PWM, S-BUS or SRXL protocols.

Everything you need.

In the small box.

Více

RF module

Designed entirely by Spirit System for allowing the unprecedented integration.
Spirit Wave 2.4Ghz full-range telemetry.
Dual Path independent antennas for improved safety and Signal coverage.
Full featured 30+ channels available.
Blazing fast 300 Hz transmission.
High interference immunity.

Features

Reliable Spirit RF protocol
333Hz Frame Rate
Cutting Edge 3ms Link Latency
30 Channels (more can be added if needed)
Dual Path Transmission
Easy Receiver Binding
4.3“ IPS Touchscreen Display
6900mAh Battery
Quad Core 64bit ARM CPU
Fully optimized Touch Interface
Pre-assembled with Tempered Glass Protector
High quality Hall AG01/AG02 gimbals
Very durable Switches, Sliders and Potentiometers
Interchangeable Switches
Full of Aluminium parts, yet light
2.4/5GHz Dual Band WiFi
Bluetooth/BT LE 4.0
Virtually unlimited Model Memory and Flight Modes
Voice Output with 3W Speaker
High Quality Programmable Text to Speech in all languages
Fast Telemetry with Full Range in both directions
Based on in-house developed Spirit OS
Multi Language localization
Log Viewer for all Telemetry records
Battery Manager included out of the box
Wireless Trainer • Wireless Model Sharing
Unique Spirit Remote Interface
Media Player
Full Support for R/C simulators / USB-C or WiFi
Spirit App Store with apps designed just for Wave
QML Scripting support
Spirit Online Support directly in your radio
Motion Sensor for controlling any Function
Light Sensor for adjusting screen parameters
Quick and Easy Online Updating without a computer
Extremely tight Spirit Integration
Support for all common ESC telemetries
Modern ESC configuration directly from Radio with selected brands
Spirit parameters per each Flight Mode

Detailed Function List

Spirit Wave - Function List

Supported Models

Helicopter
Plane
Copter
Car
Boat
Other

Specifications

Weight: 1110g
Main Body dimension: 180 x 170 x 65 mm
(excluding Radio Holder, Switches and Neck Strap Lock)
Operating Temeperature: 0 - 40°C / 32°F -104°F
Battery: 6900mAh 3.8V Premium Grade LiPo
Current Consumption: 850 mA max., 45 nA Standby

Package Content

Spirit Wave Pro transmitter
Carry Bag
Neck Strap
2m USB-C Cable
Alan Key
Torx T6 Key

WARNING: USB Charger is not included, you can buy it optionally from us. Any USB (USB-A) charger will work, including USB port from a computer.

Package Dimension

Carton Product Box: 260 x 250 x 145 mm

Comparison

Spirit Wave Pro

Full Aluminium Chasis with Anodized durable surface.
Laser Engraved label.
Weight: 1110g +/- 40g
Free Switch Replacement Program (Up to 10 pcs)
Free AG01/AG02 Stick Replacement Program (Up to 1pc, not set)
All Switches, Gimbals shipped by Spirit System directly to customer as per request (eligible within Warranty Period)
30GB Spirit Cloud Service for Model, Log Data backup
Secondary WiFi Antenna

Spirit Wave

1GB Spirit Cloud Service for Model, Log Data backup
Weight: 865g +/- 10g

Spirit Wave PRO R/C System Radio - Grey Anodized 1.679,90 €

Sun, 05 Jul 2026 20:28:51 +0200

It is designed for all R/C models and it's capabilities can be extended without a limitation. Easily by Updating to a new version, for free.

Spirit Wave Pro can be easily bound with Spirit W1 controllers or with Spirit RX receivers. Spirit W1 is our greatest unit for R/C helicopters and R/C airplanes with integrated Wave receiver.

Any third party controller can be connected through Spirit RX receiver by a standard PWM, S-BUS or SRXL protocols.

Everything you need.

In the small box.

Více

RF module

Designed entirely by Spirit System for allowing the unprecedented integration.
Spirit Wave 2.4Ghz full-range telemetry.
Dual Path independent antennas for improved safety and Signal coverage.
Full featured 30+ channels available.
Blazing fast 300 Hz transmission.
High interference immunity.

Features

Reliable Spirit RF protocol
333Hz Frame Rate
Cutting Edge 3ms Link Latency
30 Channels (more can be added if needed)
Dual Path Transmission
Easy Receiver Binding
4.3“ IPS Touchscreen Display
6900mAh Battery
Quad Core 64bit ARM CPU
Fully optimized Touch Interface
Pre-assembled with Tempered Glass Protector
High quality Hall AG01/AG02 gimbals
Very durable Switches, Sliders and Potentiometers
Interchangeable Switches
Full of Aluminium parts, yet light
2.4/5GHz Dual Band WiFi
Bluetooth/BT LE 4.0
Virtually unlimited Model Memory and Flight Modes
Voice Output with 3W Speaker
High Quality Programmable Text to Speech in all languages
Fast Telemetry with Full Range in both directions
Based on in-house developed Spirit OS
Multi Language localization
Log Viewer for all Telemetry records
Battery Manager included out of the box
Wireless Trainer • Wireless Model Sharing
Unique Spirit Remote Interface
Media Player
Full Support for R/C simulators / USB-C or WiFi
Spirit App Store with apps designed just for Wave
QML Scripting support
Spirit Online Support directly in your radio
Motion Sensor for controlling any Function
Light Sensor for adjusting screen parameters
Quick and Easy Online Updating without a computer
Extremely tight Spirit Integration
Support for all common ESC telemetries
Modern ESC configuration directly from Radio with selected brands
Spirit parameters per each Flight Mode

Detailed Function List

Spirit Wave - Function List

Supported Models

Helicopter
Plane
Copter
Car
Boat
Other

Specifications

Weight: 1110g
Main Body dimension: 180 x 170 x 65 mm
(excluding Radio Holder, Switches and Neck Strap Lock)
Operating Temeperature: 0 - 40°C / 32°F -104°F
Battery: 6900mAh 3.8V Premium Grade LiPo
Current Consumption: 850 mA max., 45 nA Standby

Package Content

Spirit Wave Pro transmitter
Carry Bag
Neck Strap
2m USB-C Cable
Alan Key
Torx T6 Key

WARNING: USB Charger is not included, you can buy it optionally from us. Any USB (USB-A) charger will work, including USB port from a computer.

Package Dimension

Carton Product Box: 260 x 250 x 145 mm

Comparison

Spirit Wave Pro

Full Aluminium Chasis with Anodized durable surface.
Laser Engraved label.
Weight: 1110g +/- 40g
Free Switch Replacement Program (Up to 10 pcs)
Free AG01/AG02 Stick Replacement Program (Up to 1pc, not set)
All Switches, Gimbals shipped by Spirit System directly to customer as per request (eligible within Warranty Period)
30GB Spirit Cloud Service for Model, Log Data backup
Secondary WiFi Antenna

Spirit Wave

1GB Spirit Cloud Service for Model, Log Data backup
Weight: 865g +/- 10g

Spirit Wave PRO R/C System Radio - Black Anodized 1.679,90 €

Wed, 17 Jun 2026 12:55:38 +0200

It is designed for all R/C models and it's capabilities can be extended without a limitation. Easily by Updating to a new version, for free.

Spirit Wave Pro can be easily bound with Spirit W1 controllers or with Spirit RX receivers. Spirit W1 is our greatest unit for R/C helicopters and R/C airplanes with integrated Wave receiver.

Any third party controller can be connected through Spirit RX receiver by a standard PWM, S-BUS or SRXL protocols.

Everything you need.

RF module

Designed entirely by Spirit System for allowing the unprecedented integration.
Spirit Wave 2.4Ghz full-range telemetry.
Dual Path independent antennas for improved safety and Signal coverage.
Full featured 30+ channels available.
Blazing fast 300 Hz transmission.
High interference immunity.

Features

Reliable Spirit RF protocol
333Hz Frame Rate
Cutting Edge 3ms Link Latency
30 Channels (more can be added if needed)
Dual Path Transmission
Easy Receiver Binding
4.3“ IPS Touchscreen Display
6900mAh Battery
Quad Core 64bit ARM CPU
Fully optimized Touch Interface
Pre-assembled with Tempered Glass Protector
High quality Hall AG01/AG02 gimbals
Very durable Switches, Sliders and Potentiometers
Interchangeable Switches
Full of Aluminium parts, yet light
2.4/5GHz Dual Band WiFi
Bluetooth/BT LE 4.0
Virtually unlimited Model Memory and Flight Modes
Voice Output with 3W Speaker
High Quality Programmable Text to Speech in all languages
Fast Telemetry with Full Range in both directions
Based on in-house developed Spirit OS
Multi Language localization
Log Viewer for all Telemetry records
Battery Manager included out of the box
Wireless Trainer • Wireless Model Sharing
Unique Spirit Remote Interface
Media Player
Full Support for R/C simulators / USB-C or WiFi
Spirit App Store with apps designed just for Wave
QML Scripting support
Spirit Online Support directly in your radio
Motion Sensor for controlling any Function
Light Sensor for adjusting screen parameters
Quick and Easy Online Updating without a computer
Extremely tight Spirit Integration
Support for all common ESC telemetries
Modern ESC configuration directly from Radio with selected brands
Spirit parameters per each Flight Mode

Detailed Function List

Spirit Wave - Function List

Supported Models

Helicopter
Plane
Copter
Car
Boat
Other

Specifications

Weight: 1110g
Main Body dimension: 180 x 170 x 65 mm
(excluding Radio Holder, Switches and Neck Strap Lock)
Operating Temeperature: 0 - 40°C / 32°F -104°F
Battery: 6900mAh 3.8V Premium Grade LiPo
Current Consumption: 850 mA max., 45 nA Standby

Comparison

Spirit Wave Pro

Full Aluminium Chasis with Anodized durable surface.
Laser Engraved label.
Weight: 1110g +/- 40g
Free Switch Replacement Program (Up to 10 pcs)
Free AG01/AG02 Stick Replacement Program (Up to 1pc, not set)
All Switches, Gimbals shipped by Spirit System directly to customer as per request (eligible within Warranty Period)
30GB Spirit Cloud Service for Model, Log Data backup
Secondary WiFi Antenna

Spirit Wave

1GB Spirit Cloud Service for Model, Log Data backup
Weight: 865g +/- 10g

Package Content

Spirit Wave Pro transmitter
Carry Bag
Neck Strap
2m USB-C Cable
Alan Key
Torx T6 Key

WARNING: USB Charger is not included, you can buy it optionally from us. Any USB (USB-A) charger will work, including USB port from a computer.

Spirit Wave R/C System Radio - Red 689,90 €

Sun, 21 Jun 2026 20:34:20 +0200

Spirit Wave is next generation Radio Control System utilizing the cutting edge technology. We aim to provide the best experience for R/C model enhusiast through seamless integration of all Spirit products.

It is designed for all R/C models and it's capabilities can be extended without a limitation. Easily by Updating to a new version, for free.

Spirit Wave can be easily bound with Spirit W1 controllers or with Spirit RX receivers. Spirit W1 is our greatest unit for R/C helicopters and R/C airplanes with integrated Wave receiver.

Any third party controller can be connected through Spirit RX receiver by a standard PWM, S-BUS or SRXL protocols.

Everything you need.

RF module

Designed entirely by Spirit System for allowing the unprecedented integration.
Spirit Wave 2.4Ghz full-range telemetry.
Dual Path independent antennas for improved safety and Signal coverage.
Full featured 30+ channels available.
Blazing fast 300 Hz transmission.
High interference immunity.

Features

Reliable Spirit RF protocol
333Hz Frame Rate
Cutting Edge 3ms Link Latency
30 Channels (more can be added if needed)
Dual Path Transmission
Easy Receiver Binding
4.3“ IPS Touchscreen Display
6900mAh Battery
Quad Core 64bit ARM CPU
Fully optimized Touch Interface
Pre-assembled with Tempered Glass Protector
High quality Hall AG01 gimbals
Very durable Switches, Sliders and Potentiometers
Interchangeable Switches
Full of Aluminium parts, yet light
2.4/5GHz Dual Band WiFi
Bluetooth/BT LE 4.0
Virtually unlimited Model Memory and Flight Modes
Voice Output with 3W Speaker
High Quality Programmable Text to Speech in all languages
Fast Telemetry with Full Range in both directions
Based on in-house developed Spirit OS
Multi Language localization
Log Viewer for all Telemetry records
Battery Manager included out of the box
Wireless Trainer • Wireless Model Sharing
Unique Spirit Remote Interface
Media Player
Full Support for R/C simulators / USB-C or WiFi
Spirit App Store with apps designed just for Wave
QML Scripting support
Spirit Online Support directly in your radio
Motion Sensor for controlling any Function
Light Sensor for adjusting screen parameters
Quick and Easy Online Updating without a computer
Extremely tight Spirit Integration
Support for all common ESC telemetries
Modern ESC configuration directly from Radio with selected brands
Spirit parameters per each Flight Mode

Detailed Function List

Spirit Wave - Function List

Supported Models

Helicopter
Plane
Copter
Car
Boat
Other

Specifications

Weight: 865g
Main Body dimension: 180 x 170 x 65 mm
(excluding Radio Holder, Switches and Neck Strap Lock)
Operating Temeperature: 0 - 40°C / 32°F -104°F
Battery: 6900mAh 3.8V Premium Grade LiPo
Current Consumption: 850 mA max., 45 nA Standby

Comparison

Spirit Wave Pro

Full Aluminium Chasis
Weight: 1110g +/- 40g
Free Switch Replacement Program (Up to 10 pcs)
Free AG01 Stick Replacement Program (Up to 1pc, not set)
All Switches, Gimbals shipped by Spirit System directly to customer as per request (eligible within Warranty Period)
30GB Spirit Cloud Service for Model, Log Data backup
Secondary WiFi Antenna

Spirit Wave

1GB Spirit Cloud Service for Model, Log Data backup
Weight: 865g +/- 10g

Package Content

Spirit Wave transmitter
Carry Bag
Neck Strap
2m USB-C Cable
Alan Key
Torx T6 Key

WARNING: USB Charger is not included, you can buy it optionally from us. Any USB (USB-A) charger will work, including USB port from a computer.

Spirit Wave R/C System Radio - Grey 689,90 €

Wed, 17 Jun 2026 13:34:39 +0200

It is designed for all R/C models and it's capabilities can be extended without a limitation. Easily by Updating to a new version, for free.

Spirit Wave can be easily bound with Spirit W1 controllers or with Spirit RX receivers. Spirit W1 is our greatest unit for R/C helicopters and R/C airplanes with integrated Wave receiver.

Any third party controller can be connected through Spirit RX receiver by a standard PWM, S-BUS or SRXL protocols.

Everything you need.

RF module

Designed entirely by Spirit System for allowing the unprecedented integration.
Spirit Wave 2.4Ghz full-range telemetry.
Dual Path independent antennas for improved safety and Signal coverage.
Full featured 30+ channels available.
Blazing fast 300 Hz transmission.
High interference immunity.

Features

Reliable Spirit RF protocol
333Hz Frame Rate
Cutting Edge 3ms Link Latency
30 Channels (more can be added if needed)
Dual Path Transmission
Easy Receiver Binding
4.3“ IPS Touchscreen Display
6900mAh Battery
Quad Core 64bit ARM CPU
Fully optimized Touch Interface
Pre-assembled with Tempered Glass Protector
High quality Hall AG01 gimbals
Very durable Switches, Sliders and Potentiometers
Interchangeable Switches
Full of Aluminium parts, yet light
2.4/5GHz Dual Band WiFi
Bluetooth/BT LE 4.0
Virtually unlimited Model Memory and Flight Modes
Voice Output with 3W Speaker
High Quality Programmable Text to Speech in all languages
Fast Telemetry with Full Range in both directions
Based on in-house developed Spirit OS
Multi Language localization
Log Viewer for all Telemetry records
Battery Manager included out of the box
Wireless Trainer • Wireless Model Sharing
Unique Spirit Remote Interface
Media Player
Full Support for R/C simulators / USB-C or WiFi
Spirit App Store with apps designed just for Wave
QML Scripting support
Spirit Online Support directly in your radio
Motion Sensor for controlling any Function
Light Sensor for adjusting screen parameters
Quick and Easy Online Updating without a computer
Extremely tight Spirit Integration
Support for all common ESC telemetries
Modern ESC configuration directly from Radio with selected brands
Spirit parameters per each Flight Mode

Detailed Function List

Spirit Wave - Function List

Supported Models

Helicopter
Plane
Copter
Car
Boat
Other

Specifications

Weight: 865g
Main Body dimension: 180 x 170 x 65 mm
(excluding Radio Holder, Switches and Neck Strap Lock)
Operating Temeperature: 0 - 40°C / 32°F -104°F
Battery: 6900mAh 3.8V Premium Grade LiPo
Current Consumption: 850 mA max., 45 nA Standby

Comparison

Spirit Wave Pro

Full Aluminium Chasis
Weight: 1110g +/- 40g
Free Switch Replacement Program (Up to 10 pcs)
Free AG01 Stick Replacement Program (Up to 1pc, not set)
All Switches, Gimbals shipped by Spirit System directly to customer as per request (eligible within Warranty Period)
30GB Spirit Cloud Service for Model, Log Data backup
Secondary WiFi Antenna

Spirit Wave

1GB Spirit Cloud Service for Model, Log Data backup
Weight: 865g +/- 10g

Package Content

Spirit Wave transmitter
Carry Bag
Neck Strap
2m USB-C Cable
Alan Key
Torx T6 Key

WARNING: USB Charger is not included, you can buy it optionally from us. Any USB (USB-A) charger will work, including USB port from a computer.

Spirit Wave R/C System Radio - Black 689,90 €

Wed, 17 Jun 2026 18:10:44 +0200

It is designed for all R/C models and it's capabilities can be extended without a limitation. Easily by Updating to a new version, for free.

Spirit Wave can be easily bound with Spirit W1 controllers or with Spirit RX receivers. Spirit W1 is our greatest unit for R/C helicopters and R/C airplanes with integrated Wave receiver.

Any third party controller can be connected through Spirit RX receiver by a standard PWM, S-BUS or SRXL protocols.

Everything you need.

RF module

Designed entirely by Spirit System for allowing the unprecedented integration.
Spirit Wave 2.4Ghz full-range telemetry.
Dual Path independent antennas for improved safety and Signal coverage.
Full featured 30+ channels available.
Blazing fast 300 Hz transmission.
High interference immunity.

Features

Reliable Spirit RF protocol
333Hz Frame Rate
Cutting Edge 3ms Link Latency
30 Channels (more can be added if needed)
Dual Path Transmission
Easy Receiver Binding
4.3“ IPS Touchscreen Display
6900mAh Battery
Quad Core 64bit ARM CPU
Fully optimized Touch Interface
Pre-assembled with Tempered Glass Protector
High quality Hall AG01 gimbals
Very durable Switches, Sliders and Potentiometers
Interchangeable Switches
Full of Aluminium parts, yet light
2.4/5GHz Dual Band WiFi
Bluetooth/BT LE 4.0
Virtually unlimited Model Memory and Flight Modes
Voice Output with 3W Speaker
High Quality Programmable Text to Speech in all languages
Fast Telemetry with Full Range in both directions
Based on in-house developed Spirit OS
Multi Language localization
Log Viewer for all Telemetry records
Battery Manager included out of the box
Wireless Trainer • Wireless Model Sharing
Unique Spirit Remote Interface
Media Player
Full Support for R/C simulators / USB-C or WiFi
Spirit App Store with apps designed just for Wave
QML Scripting support
Spirit Online Support directly in your radio
Motion Sensor for controlling any Function
Light Sensor for adjusting screen parameters
Quick and Easy Online Updating without a computer
Extremely tight Spirit Integration
Support for all common ESC telemetries
Modern ESC configuration directly from Radio with selected brands
Spirit parameters per each Flight Mode

Detailed Function List

Spirit Wave - Function List

Supported Models

Helicopter
Plane
Copter
Car
Boat
Other

Specifications

Weight: 865g
Main Body dimension: 180 x 170 x 65 mm
(excluding Radio Holder, Switches and Neck Strap Lock)
Operating Temeperature: 0 - 40°C / 32°F -104°F
Battery: 6900mAh 3.8V Premium Grade LiPo
Current Consumption: 850 mA max., 45 nA Standby

Comparison

Spirit Wave Pro

Full Aluminium Chasis
Weight: 1110g +/- 40g
Free Switch Replacement Program (Up to 10 pcs)
Free AG01 Stick Replacement Program (Up to 1pc, not set)
All Switches, Gimbals shipped by Spirit System directly to customer as per request (eligible within Warranty Period)
30GB Spirit Cloud Service for Model, Log Data backup
Secondary WiFi Antenna

Spirit Wave

1GB Spirit Cloud Service for Model, Log Data backup
Weight: 865g +/- 10g

Package Content

Spirit Wave transmitter
Carry Bag
Neck Strap
2m USB-C Cable
Alan Key
Torx T6 Key

WARNING: USB Charger is not included, you can buy it optionally from us. Any USB (USB-A) charger will work, including USB port from a computer.

Mikado VBar Control EVO+ sand # 05626 1.349,00 €

Fri, 17 Jul 2026 16:11:19 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production
Latest technology ARM Cortex M7 with large caches and low power consumption
Graphics processor (GPU)
Internal flash disk 4 GB (Touch: 128 MB)
Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
USB data transfers 10 times faster
Improved Touch Display
USB-C fast charging with 15 W with any off-the-shelf USB-C charger
Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Mikado VBar Control EVO+ iron grey # 05627 1.349,00 €

Mon, 15 Jun 2026 12:07:05 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Mikado VBar Control EVO+ dark blue # 05625 1.349,00 €

Mon, 15 Jun 2026 12:04:44 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Graupner Transmitter mz-32 HoTT 32-Chanal # S1024.77 1.099,00 €

Mon, 01 Dec 2025 09:38:48 +0100

Graupner Transmitter mz-32 HoTT 32-Chanal

The mz-32 is centered around you!
The Graupner mz-32 is our third generation telemetry radio system that advances RC radios to a level never seen before. With its rich set of hardware and software features, the mz-32 is introducing a new level of functionality where you, the user, can control almost any part of the radio.

With the mz-32 you are in control!
The mz-32 brings you the power to design your own screens, program your own control logic, filter your own voice notifications and even design the look of your radio.
Flexibility and configurability are the hallmarks of the Graupner mz-32!

With the mz-32 you fly smoother and beyond!
The Graupner mz-32 is the first radio on the market that provides full 32 channel functions right out of the box! It supports five different model types such as electric, gas or turbine airplanes, helicopters, multirotor, cars and even boats.
It can store and load up to 999 different user models, has 12 flight-phases and 16 curve mixers which can be set global or flight-phase dependent! The hall sensor 4096 resolution quad bearing gimbals provide the smoothest control feel a pilot can experience. The gimbals can weather almost any field conditions and offer easy back-access for adjustment to fine-tune the stick tension the way you like.
The mz-32 has a dual 2.4GHz redundant RF system driving a polarized patch antenna for unmatched signal quality and extended range. The included 9000mAh LiPo battery will provide more than 10 hours of operating time, which makes a long day at the field both possible and fun!

The mz-32 adapts to you!
The outdoor friendly 4.3-inch state of the art TFT color touchscreen ensures convenient access to all the mz-32 functions for setting up and managing your models.
The highly optimized and fast performing graphical user interface is driven by a high-performance processor making access to menus and functions fast and crisp just like on your Smartphone.
The intuitive touch and tap control makes navigation around the menus fast, easy and fun.
Designing your own screen layouts to display information or create menu shortcuts can be done on the fly by simply tapping on the screen.
The mz-32 provides over hundred widgets which make up the screens that you like and fit your style for controlling your models.
You can create in total six screens that better fit your needs and personal style using the tip of your finger. No programming needed! You can do it all with the mz-32
One radio for all, German, English, French and Italian language is supported with more languages to come all in one radio!

More channels more control for you!
With 32 channels the mz-32 provides unlimited functionality and control over any model that you have. You can bind up to four 2.4GHz receivers so you can layout and distribute the channels the way you want.
For example, you can have two six-channel receivers for each wing from where you can control ailerons, flaps, landing gear, and lights. Just supply main power to the wing, and you are ready to go.
No complicated wiring or expensive hubs needed! This provides you with a level of simplicity with the benefits of RF redundancy unseen before in the industry.
Still need more channels but do not have enough switches to do what you want? The mz-32 now also provides up to 64 digital switches that can be assigned and controlled from the widget menu with a simple tap. Create as many digital switch combinations as you like for turning lights and smoke on or off, turn cranes or water guns or anything else that you need to control without using up your switches.
Switching and control options are further enhanced with Logical Switches (And, Or, Equal, Not), Control Switches, and Combination Switches. Each provides a new level of control to you depending on switch position or stick location.
You determine how you like to name each of them.

Voices that you want to hear!
Need to hear what is going on? The mz-32 provides endless options to generate almostany type of system or telemetry voice notification depending on the state of your radio such as switch positions, flight phase names, warnings, vario information and endless others.
The mz-32 starts communicating with you from the moment you turn it on, informing you if a switch or control is in the wrong position for the selected model. No more surprises from collapsing landing gear, runaway motors or wrong gyro settings. The mz-32 can inform you when needed even whenyou forgot to bring down your landing gear or are about to run out of range or battery.
Walks of shame are now a thing of the past!
With over 600 installed voices, you can make almost any combination of voice announcements or add as many as you want using our text to speech editor.

Help when you need it!
In need of help during setup or when something is unclear? Forget about searching through lengthy manuals or endless web searches! The mz-32 provides support right where you need. Each menu and option has its own context-sensitive answers right on the screen. Just tap the question mark and you will be instantly presented with help and assistance.
Don't like our help screens? Make or add your own help screens with whatever makes sense to you. The mz-32 is there for you allowing you to do and have the things you like the most.

Connectivity that takes you further!
With integrated Bluetooth and Wi-Fi the mz-32 is ready to connect you with the rest of the world! Use your Bluetooth headset to hear voice alerts or music from the built-in music player. It's your choice!
Connect to your wireless LAN to receive notifications about newly released firmware that are instantly downloaded and installed on your radio. Your mz-32 is always up to date with the latest and greatest! The update can also be done by using the included USB cable and the latest firmware which you canalways find on our website.
Graupner takes connectivity further with a micro USB port that can charge your radio, access your included 16GB micro SD memory card where screens, models, voice files, music and screen shots are stored.
You can use the USB or DSC port also as a joystick controller for games and flightsimulators. Now you can practice flying your model on your favorit flightsimulator with the same radio that you use at the field!
The data port on the back can be configured to output a variety of digital signal outputs like SUMD, CROSSFIRE, Smart Box, and more. Adding and using third-party modules such as long-range FPV has never been easier than with the mz-32.
All Graupner HoTT receivers now also support digital single wire output such as PPM, SUMD, and SBUS for more connectivity and better interoperability.
The built-in file manager lets you manage things like voice files, screenshots, and more from wherever you are!

Wireless setup for your controllers
Computers, wirers, and programming boxes are things of the past! The mz-32 HoTT wireless protocol lets you do everything right on the radio! Need to set up your telemetry, flight controller or reverse the direction of your telemetry ESC or flight controller? Just use the shortcut key on the radio to access any of the receiver connected devices, and you are immediately in business. Do this at home while setting up your model or at the field to fine-tune your settings.
Enjoy the HoTT integration of third-party flight controllers and sensors like Ikon, Spirit, 3Digi, MSH-Brain, and many more for easy access using only your mz-32 radio. Each of Graupner's HoTT receivers provides this functionality, and there is no need to purchase anything else to use these convenient features.

Telemetry to inform you
When it comes to telemetry, Graupner is king, and the mz-32 has all that is needed to keep you informed! Each Graupner receiver provides real-time voice alerts about signal quality, receiver voltage, and temperatures. Additional modules keep you informed about your battery voltage, battery left, altitude, speed, and much more!
The mz-32 allows you to set up almost any type of telemetry conditions alerting you when needed during all phases of the flight and eliminate costly and dangerous surprises. The active flight data logging is stored on the SD card for later review or can be viewed in real-time on a connected computer.
All the telemetry data output can be displayed on one of the six decks, enabling you to design your telemetry layout just the way you like it using the widget editor.

Train your buddies
Training your family members or friends is as easy as bind and teach! The mz-32 provides a wireless and wired trainer option that can be used with any of our HoTT radios using the DSC port in the back.
You can assign control to any of the active channels depending on your student's level and model capabilities. Passing control is easily done with a flick of a switch.

Easy to hold easy to use
Ergonomics is key for a comfortable feel, and the mz-32 is designed with you, the pilot, in mind. The ultra-smooth and height adjustable gimbals enable precise control during all flight phases.
Switch length and spacing have been engineered for easy and comfortable operation during flight. For those who need extra control, we provide optional sticks with switches or buttons.
The mz-32 provides comfortable rubber holding grips that further enhance your feeling of control. The mz-32 can be further enhanced with different colored faceplates that better reflect your taste and style.
The mz-32 has in total 8 switches, 4 knobs, 2 lever controls, and 8 user-assignable digital buttons.
Visit our website to learn more about your mz-32 and find all available accessories.

Hardware:

Hall Sensor quad bearing gimbals with 4096 resolutions for smooth and precise control
Outdoor friendly 4.3-inch TFT color and touch screen
Redundant dual 2.4GHz RF modules
Circular polarized patch antenna with adjustable beam angle
9000 mAh LiHV rechargeable battery for up to 10 hours and more of operation
Micro-USB port for charging, data communication, joystick function or mass storage
Externally adjustable stick tension and mode selection
Internal 'SD 16 Gb memory card
Built in Wireless and Bluetooth communication
DSC socket for external communications (wired buddy box, flight simulators, other)
Wireless student teacher operation
Wireless firmware update
Integrated speaker for voice output and telemetry notifications
User configurable DSC and data ports (SUMD, CROSSFIRE and others)
User assignable haptic feedback
5 x 3 position switches, 2 x 3 position/toggle switches, 1 x 2 position switch, 4 proportional knobs, 2 x lever controls, 8 user assignable digital buttons
6 speed control and navigation keys

Software:
32 proportional channels
999 Model memory
4 Receiver binding 10ms or 20ms frame rate
Model, group or global binding modes
Model types: Airplane, Helicopter, Multirotor, Vehicle, Boat
12 selectable flight modes
8 wing types, 6 delta wing types, 3 tail types
Multi engine control (4)
6 user designable widgets dashboards (model specific or global)
Context sensitive help text
Text to speech with VDF editor
Servo balancer & synchronization
8 phase dependent assignable trim settings and 5 trim types
6 phase dependent configurable timers (Start/Stop, Lap, Lap Trigger, Lap Toggle)
8 phase dependent quad rate and expo settings
16 phase dependent multi point user mixers
8 dual differential mixers
3 channel sequencers
3 channel ring limiters
64 user assignable digital switches
12 assignable combination switches
12 assignable logical switches
12 assignable control switches
4 snap roll mixes
8 wing and tail mixers and crow/butterfly function
9 user assignable and configurable system voice notifications
24 user assignable and configurable user voice notifications
8 user assignable and configurable control voice notifications
8 user assignable and configurable voice notifications
Dedicated vario and control menu with dead zone control
Wireless setup of receivers, telemetry and flight controllers
User configurable MP3 player
Integrated file manager

Info
NEW: Safety:

FHSS, frequency hopping over up to 75 channels

Maximum interference immunity through optimised frequency hopping, wider channel spread and antenna diversification

Intelligent data transfer including error correction

Extremely wide range

Range test and warning function

Undervoltage warning

Extremely wide receiver operating voltage range of 3.6 V to 8.4 V (functional up to 2.5 V)

Numerous fail-safe functions

Precision:

Shorter response times can be set (10 ms period time)

No additional delays due to module processors All hopping management is handled directly by the 32 bit main processor.

Synchronous servo operation made possible by simultaneous control of servo outputs in blocks of 4

Pilot feeling:

Essentially delay-free control responses due to direct processing

Real-time telemetry evaluation

Wireless teacher/pupil function

Other features:

Simple and extremely fast binding

Free channel assignment (channel mapping), transmitter and receiver mixer functions and all servo settings are simple to program

Binding of any number of receivers for channel expansion (16 channels maximum) The last receiver bound sends the telemetry data.

Update capability via USB interface with adapter cable #6466.S guarantees future viability

Specification
Control function: 32
Width [mm]: 195 mm
Height [mm]: 105 mm
Temperature range [°C] : -10 - +55 °C
All-up weight [g]: 1120 g
Frequency : 2400 - 2483,5 MHz
Range approx. [m] : 5000 m
Overall length [mm]: 210 mm
Dimensions [LxWxH in mm]: 210 x 195 x 90 mm
Modulation: FHSS

Current consumption [mA]: 480 - 1100 mA
Operating voltage neutral [V] : 3,6 - 4,35 V
Batteries or accumulators included?: Yes
Total weight of Lithium Ion packs in the package: 154 g
Battery / accumulator chemical composition: LiPo
Battery, Lithium Ion Battery name energy in Watt per hour: 34,2 W
Touch Display: Yes
Teacher- / student-system: Yes
Spezifikationen Display: 4.3' TFT Color-Touchdisplay
Voice output: Yes
Flight phase: Yes
Channels: 32
Micro SD: Yes
Telemetry capable: Yes
Mixer: Yes
Display?: Yes
USB connection: Yes
Model memory: 255
Transmitter type: Hand
HoTT - Technology: Yes
Language variant: DE / GB
Transmitter series: mz

The Set contains:

- mz-32 transmitters
- USB charging cable
- USB update adapter for receiver and sensor updates
- LiHV battery 9000 mAh
- transmitter belt
- aluminum case
- Instructions in German, English, French and Italian

Mikado VBar Control EVO+ nato-oliv # 05623 1.349,00 €

Thu, 09 Jul 2026 11:57:22 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Mikado VBar Control EVO+ steelblue # 05622 1.349,00 €

Fri, 10 Jul 2026 16:24:42 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Mikado VBar Control EVO+ lava-red # 05624 1.349,00 €

Wed, 11 Mar 2026 00:16:35 +0100

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Mikado VBar Control EVO+ black-green # 05618 1.349,00 €

Mon, 26 May 2025 12:40:52 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Mikado VBar Control EVO+ black-gelb # 05617 1.349,00 €

Mon, 26 May 2025 12:40:52 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.