Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Align T-Rex/T-REX 800E products

Azure Power 115 Xtreme Carbon Tailblade 115mm 35,90 €

Mon, 27 Jul 2026 11:42:16 +0200

Azure Power 115 Xtreme Heli Tail Blade 115mm

Technical Specifications:

Length:	115mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	--g
Width:	28.5mm - 31.5mm
Airfoil:	Symmetric

Azure Power 115 PRO Carbon Tailblade 115mm 35,90 €

Tue, 30 Jun 2026 10:30:05 +0200

Azure Power 115 PRO Heli Tail Blade 115mm

This high performance tail blade has an unique design with a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved great performance of your tailrotor.

Technical Specifications:

Length:	115mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	8g
Width:	28.5mm - 31.5mm
Airfoil:	Symmetric

Azure Power AZ 115S Carbon Tailblade orange 115mm 35,90 €

Tue, 14 Jul 2026 12:00:05 +0200

Azure Heli Tail Blade 115mm

Length:	115mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	8g
Width:	28mm - 31.5mm
Airfoil:	Symmetric

Azure Power Carbon Tailblade 115mm 35,90 €

Wed, 29 Jul 2026 11:50:06 +0200

Azure Heli Tail Blade 115mm

Length:	115mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	8g
Width:	28mm - 31.5mm
Airfoil:	Symmetric

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

Align DS830 Servo Gear Set # HSP83001 29,90 €

Mon, 01 Dec 2025 09:38:43 +0100

Gear Set

●DS830 gear G1x1
●DS830 gear G2x1
●DS830 gear G3x1
●DS830 gear G4x1

Spare part suitable for:
Align DS820/DS820M/DS830M Servo

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Mon, 15 Jun 2026 12:08:22 +0200

Mikado Power Backup 50F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 50F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

ManiaX HV LiPo 6S 6500mAh 22.8V High Voltage 100C 189,90 €

Wed, 29 Jul 2026 09:03:38 +0200

The ManiaX Power HV LiPo Batteries are characterized by:

- More number of cycles with less wear
- High charge rate
- High voltage under full load
- Constant voltage level
- Power until the end of the flight
- Low internal resistance
- Low heating even under full load
- Top performance / discharge rate / weight ratio

Technical specifications:
- Voltage: 22,8V
- Capacity: 6500mAh
- Discharge rate: 100C
- Discharge rate Peak: 200C
- Charging current: 1-3C Max 5C
- Dimensions H*W*L : 52*48*155mm
- Weight: ca. 850g
- Balancer connector: XH
- Discharge cable length: 14cm
- Discharge cable: 8AWG
- Discharge connector: 2 wires for power

MS Composit Carbon Tail Blades 115mm /5/3-FC # MS-R70115-FC 30,90 €

Mon, 27 Jul 2026 11:00:56 +0200

CFC Tail Blades 115 mm/5/3

MS Composit manufactures a broad line of carbon composite tail rotor blades. The tail rotor blades manufacturing technology is derived from the main rotor blades, and ensures high blade performance in all situations. All MS Composits tail rotor blades are dynamically balanced and tested for overload. The security factor (blade dynamic overload) is 2.1 for all types of tail blades.

Technical specifications:
Length: 115 mm
Width: 29mm
Blade type: Standard
Root: 5 mm
Bolt: 3 mm
Profile: Symm
Weight: 7,5 g

Suitable for:
T-REX 800 / Goblin 700 - 770

NEXSPOR CLS4011T Coreless HV Digital Servo (Tail) 49,90 €

Sat, 25 Jul 2026 03:26:57 +0200

CLS4011T tail servo for helicopter of the 500 – 800 class

The new Nexspor 40mm Coreless servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.
The servos are characterized by high speed, positioning accuracy and a lot of power.

The case of the servo is designed to fit in the most popular helicopters. Example for Goblin helicopter you don´t need any require additional shims.
We tested it at OXY 5, Goblin 570-770, Align T-Rex 550-700, Mikado Logo 550-700, Gaui X5-X7, XLPower Specter 700 and Protos 700-800.

Feature:

- Extremely fast tail servo
- High quality Coreless motor
- High quality potentiometer
- High metal gear
- High resolution
- Full CNC aluminium case
- Dual ball bearings
- Ideal for 500 - 800 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,06 sec/60°
Speed at (7,4V)	0,04 sec/60°
Speed at (8,4V)	0,03 sec/60°
Torque at (6,0V)	8,0 kg/cm
Torque at (7,4V)	10,0 kg/cm
Torque at (8,4V)	11,3 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx etc..)
Dimensions (mm)	40x20x40,9
Weight	71g
Connecting wire	JR320mm

Accessories:

1x Servo CLS4011T
5x Servo horn
2x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

AS150 7mm Connector system 5x set for Battery 17,90 €

Wed, 29 Jul 2026 11:20:29 +0200

AS150 7mm connector set on battery side

Content:

5x 7mm plug and housing black (battery side)
5x 7mm socket and housing red (battery side)

AS150 7mm Connector system 5x set for ESC 17,90 €

Thu, 23 Jul 2026 08:14:11 +0200

AS150 7mm connector set on ESC side

Content:

5x 7mm plug and housing red without anti spark(ESC side)
5x 7mm socket and housing black (ESC side)

1st Tail Blades CFK 115mm (orange) # 1stB115-O 29,90 €

Thu, 09 Jul 2026 23:05:05 +0200

Tail Blades CFK 115mm

Technical specifications:
blade length: 115mm
blade admission: 5mm
borehole: 3mm
weight per blade: approx. 6.7g
blade width / depth: 32mm
number of blade: 2

AS150 7mm Connector system with anti spark 5x Set 38,90 €

Tue, 28 Jul 2026 21:42:46 +0200

The AS150 connector system is designed with 7mm Ø for a load capacity of 150A permanently and 200A temporarily and thus covers a wide range of applications.

The plug on the ESC side is equipped with an integrated anti-flash and prevents sparking when the flight battery is connected.

They can be used for one battery as well as for batteries connected in series without the need for an adapter.

The plastic housings of the AS150 connector system are screwed onto the plugs and sockets, which makes them easy to install and reuse.

The AS150 connector system is recommended for models from the 500 size upwards.

Content:
5x 7mm plug with anti-flash and housing red (ESC on the side)
5x 7mm socket and housing black (ESC side)
5x 7mm plug and housing black (battery side)
5x 7mm socket and housing red (battery side)

1st Tail Blades CFK 115mm # 1stB115 25,90 €

Thu, 09 Jul 2026 23:05:05 +0200

Tail Blades CFK 115mm

Technical specifications:
blade length: 115mm
blade admission: 5mm
borehole: 3mm
weight per blade: approx. 6.7g
blade width / depth: 32mm
number of blade: 2

soXos Skid Rubber Neon Yellow # 8097-2 9,50 €

Sun, 19 Jul 2026 18:21:38 +0200

Skid Rubber Neon Yellow

Includes:
4 x Skid Rubber Neon Yellow (No.464-2)

Spare part suitable for Ø 9 mm- 10 mm Landing Gear Tube

For example:
soXos 550 / 600 / 700 / DB7 / Strike 7 / Strike 7.1 / 800
OXY HELI OXY 5
Align T-REX 550 - 800
SAB Goblin 700

soXos Skid Rubber Orange # 8097-5 9,50 €

Mon, 29 Jun 2026 20:21:01 +0200

Skid Rubber Orange

Includes:
4 x Skid Rubber Orange (Nr.464-5)

Spare part suitable for Ø 9 mm- 10 mm Landing Gear Tube

For example:
soXos 550 / 600 / 700 / DB7 / Strike 7 / Strike 7.1 / 800
OXY HELI OXY 5
Align T-REX 550 - 800
SAB Goblin 700

soXos Skid Rubber Neon Red # 8097-3 9,50 €

Mon, 22 Jun 2026 00:08:46 +0200

Skid Rubber Neon Red

Includes:
4 x Skid Rubber Neon Red (Nr.464-3)

Spare part suitable for Ø 9 mm- 10 mm Landing Gear Tube

For example:
soXos 550 / 600 / 700 / DB7 / Strike 7 / Strike 7.1 / 800
OXY HELI OXY 5
Align T-REX 550 - 800
SAB Goblin 700

soXos Skid Rubber Red # 8097-6 9,50 €

Wed, 10 Jun 2026 11:00:05 +0200

Skid Rubber Red

Includes:
4 x Skid Rubber Red (Nr.464-6)

Spare part suitable for Ø 9 mm- 10 mm Landing Gear Tube

For example:
soXos 550 / 600 / 700 / DB7 / Strike 7 / Strike 7.1 / 800
OXY HELI OXY 5
Align T-REX 550 - 800
SAB Goblin 700