Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Align T-Rex/T-REX 500XT DOMINATOR products

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

Align T-Rex 550E / 600E PRO / 600EFL PRO Bearing (117ZZ) # H60227 6,60 €

Fri, 17 Apr 2026 15:00:48 +0200

Bearing 117ZZ x 2 (Ø7xØ11x3mm)

Spare part suitable for:
Align T-Rex 550E / 600E PRO / 600EFL PRO

NEXSPOR BLS3507T Brushless HV Digital Servo 35mm (Tail) # BLS3507T 74,90 €

Mon, 27 Jul 2026 09:35:43 +0200

BLS3507T –Ultra fast Brushless Mini 35mm Tailservo for helicopter of the 450 – 600 class

The new Nexspor 35mm brushless servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.
The servos are characterized by high speed, positioning accuracy and a lot of power. Pleasant is also the operating noise.
The crunching and crackling is a thing of the past in the stand and under load.

The softstart protects the BEC and the mechanics of the Heilis in initialization.

Feature:

- Extremely fast tail servo
- High quality brushless motor
- High quality potentiometer
- Softstart
- High precision steel gear
- High resolution
- Full CNC aluminium case
- Dual ball bearings
- Ideal for 450 - 600 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,04 sec/60°
Speed at (7,4V)	0,033 sec/60°
Speed at (8,4V)	0,03 sec/60°
Torque at (6,0V)	5,9 kg/cm
Torque at (7,4V)	7,0 kg/cm
Torque at (8,4V)	7,5 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Dimensions (mm)	35x15x33,4
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx etc..)
Weight	49g
Connecting wire	JR225mm

Accessories:

1x Servo BLS3507T
1x Servo horn
2x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA THM982 Brushless HV Servo 84,90 €

Thu, 23 Jul 2026 14:58:04 +0200

THETA THM982 Brushless HV Servo

Brushless HV servo in the 35 mm size.
The application range of the servo is versatile from helicopter tail servo in 450-600 midi size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM982
4x Servohorn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo
1x Capacitor

1st Main Blades CFK 470mm FBL # 1stB470 64,90 €

Sun, 05 Jul 2026 19:12:17 +0200

1st Main Blades CFK 470mm FBL

Technical specifications:
blade length: 470mm
blade admission: 10mm
borehole: 3mm
Weight per blade: approx. 70g
max. rpm: 2900
blade width / depth: 43mm
profile: Fully symmetrical
direction of rotation: clockwise
number of blade: 2

1st Main Blades CFK 470mm FBL (yellow) # 1stB470-Y 69,90 €

Mon, 01 Dec 2025 09:38:42 +0100

1st Main Blades CFK 470mm FBL

1st Main Blades CFK 470mm FBL (orange) # 1stB470-O 69,90 €

Mon, 01 Dec 2025 09:38:42 +0100

1st Main Blades CFK 470mm FBL

NEXSPOR Servo Arm Reinforced 25T 5,9mm # VSH-25T-4S 11,90 €

Wed, 29 Jul 2026 15:31:20 +0200

Reinforced plastic servo arm set with 25T toothing

Suitable for mini and standard servos / 35 - 40mm Servos with Ø5,9mm 25T toothing:

- Futaba Servos
- Savöx Servos
- Align Servos
- BK Servos
- Outrage Servos
- MKS Servos
- KST Servos
- Nexspor Servos

The ideal servo arm for SAB Goblin 500 - 770, OXY 5, Soxos 550-800, Align T-REX 500 - 800 and many more ...

Content:

4x NEXSPOR Servo Arm Reinforced 25T 5,9mm

Align 500XT Main Drive Gear Mount # H50G011XX 30,09 €

Wed, 11 Mar 2026 00:16:07 +0100

500XT Main Drive Gear Mount

1x 500XT Main Drive Gear Mount
1x 500XT One-way Bearing Shaft (Ø7xØ10x28.5mm)
3x Socket Screw (M2.5x5mm)

Spare part suitable for:
Align T-REX 500XT

SLS Quantum 3000mAh 6S1P 22,2V 30C/60C # SLSQ30006130 70,20 €

Tue, 16 Jun 2026 07:58:12 +0200

Technische Daten:

Spannung: 22,2V
Ausführung: 6S1P
Kapazität: 3000mAh
Dauerentladestrom: max. 30C (90A)
Kurzzeitiger Entladestrom: max. 60C (180A)
Ladestrom: max. 5C (15A)
Gewicht: ca. 431 Gramm (inkl. Kabel und Stecker)
Maße: ca. LxBxH 140 x 43 x 35mm
Balanceranschluss: XH
Stecksystem: XT60
Hauptstromkabel: AWG12
Hauptstromkabel-Länge: 12cm

Align DS530 / DS530M Servo Gear Set # HSP53002 23,19 €

Mon, 01 Dec 2025 09:38:43 +0100

Gear Set

1x DS530 gear G1
1x DS530 gear G2
1x DS530 gear G3
1x DS530 gear G4
1x DS530 gear G5

Spare part suitable for:
Align DS530 / DS530M Servo

Align D6FF Metal Servo Horn(M2.5)-Red with Linkage Ball # HSP61015QR 31,90 €

Mon, 01 Dec 2025 09:38:43 +0100

D6FF Metal Servo Horn(M2.5)-Red

3x D6FF Metal Servo Horn(Red)
3x Ø5 Linkage Ball C(M2.5x4)

Align DS535 / DS535M Servo Gear Set # HSP53502 23,19 €

Wed, 11 Mar 2026 00:16:34 +0100

Gear Set

1x DS535 gear G1
1x DS535 gear G2
1x DS535 gear G3
1x DS535 gear G4
1x DS535 gear G5

Spare part suitable for:
Align DS535 / DS535M Servo

Align T-REX 500 78 Tail Blade # HQ0773A 13,89 €

Sun, 12 Apr 2026 11:37:32 +0200

78 Tail Blade

Shape: Symmetrical wing
Length:78mm
Width:4.9mm
Shaft Diameter:3mm
Weight:20g/set

Spare part suitable for:
Align T-REX 500

Align Hook & Loop Fastening Tape (14x210mm) # HOB00002 5,79 €

Tue, 07 Apr 2026 10:29:13 +0200

2x Hook & Loop Fastening Tape (14x210mm)

Align 470 3K Carbon Fiber Blades # HD470A 36,79 €

Thu, 04 Jun 2026 18:26:19 +0200

470 3K Carbon Fiber Blades

Specifications
Shape: Symmetrical wing
Length: 467.5x46.2mm
Width: 10mm
Shaft Diameter: 3mm

Spare part suitable for:
Align T-REX 500X

Align T-REX 500X Metal Control Arm Set # H50H006XX 27,79 €

Fri, 08 May 2026 15:30:31 +0200

Metal Control Arm Set

* 500EFL Metal lever x 2
* 500 Radius x 2
* Socket button head screw x 2(M2.5x12mm)
* Socket button head screw x 4(M2x5mm)
* Bearing 682XZZ x 4(Ø2.5xØ6x2.6mm)
* Bearing FMR52ZZ x 4(Ø2xØ5x2.3mm)
* 500 bearing collar x 2(Ø3xØ4.5x1mm)
* 250 Spacer x 2(Ø2.5xØ4.5x0.2mm)

Spare part suitable for:
Align T-REX 500X

Align T-REX 500XT One-way Bearing Shaft # H50G012XX 7,79 €

Wed, 11 Mar 2026 00:16:07 +0100

One-way Bearing Shaft

One-way bearing shaft x 1(Ø7xØ10x28.6mm)

Spare part suitable for:
Align T-REX 500XT

Align T-REX 500X Carbon Fiber Vertical Stabilizer # H50T009XX 19,69 €

Thu, 11 Jun 2026 12:53:03 +0200

Carbon Fiber Vertical Stabilizer

* 500X Carbon Fiber Vertical Stabilizer x 1
* Vertical Stabilizer Mount x 1
* Socket Screw(M2.5x25mm) x 2

Spare part suitable for:
Align T-REX 500X

Align T-REX 500XT Tail Boom Mount Set # H50T016XX 15,49 €

Thu, 11 Jun 2026 12:53:03 +0200

Tail Boom Mount Set

* 500XT Tail boom mount(L) x 1
* 500XT Tail boom mount(R) x 1
* 500X Hex mounting bolt x 4(M2.5x47mm)

Spare part suitable for:
Align T-REX 500XT