Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Align T-Rex/T-REX 500L DOMINATOR products

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

NEXSPOR BLS3507T Brushless HV Digital Servo 35mm (Tail) # BLS3507T 74,90 €

Mon, 27 Jul 2026 09:35:43 +0200

BLS3507T –Ultra fast Brushless Mini 35mm Tailservo for helicopter of the 450 – 600 class

The new Nexspor 35mm brushless servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.
The servos are characterized by high speed, positioning accuracy and a lot of power. Pleasant is also the operating noise.
The crunching and crackling is a thing of the past in the stand and under load.

The softstart protects the BEC and the mechanics of the Heilis in initialization.

Feature:

- Extremely fast tail servo
- High quality brushless motor
- High quality potentiometer
- Softstart
- High precision steel gear
- High resolution
- Full CNC aluminium case
- Dual ball bearings
- Ideal for 450 - 600 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,04 sec/60°
Speed at (7,4V)	0,033 sec/60°
Speed at (8,4V)	0,03 sec/60°
Torque at (6,0V)	5,9 kg/cm
Torque at (7,4V)	7,0 kg/cm
Torque at (8,4V)	7,5 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Dimensions (mm)	35x15x33,4
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx etc..)
Weight	49g
Connecting wire	JR225mm

Accessories:

1x Servo BLS3507T
1x Servo horn
2x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA THM982 Brushless HV Servo 84,90 €

Thu, 23 Jul 2026 14:58:04 +0200

THETA THM982 Brushless HV Servo

Brushless HV servo in the 35 mm size.
The application range of the servo is versatile from helicopter tail servo in 450-600 midi size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM982
4x Servohorn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo
1x Capacitor

1st Main Blades CFK 430mm FBL # 1stB430 47,90 €

Mon, 13 Jul 2026 13:42:54 +0200

1st Main Blades CFK 430mm FBL

Technical specifications:
blade length: 430mm
blade admission: 9mm
borehole: 3mm
Weight per blade: approx. 65g
max. rpm: 2900
blade width / depth: 42mm
profile: Fully symmetrical
direction of rotation: clockwise
number of blade: 2

NEXSPOR Servo Arm Reinforced 25T 5,9mm # VSH-25T-4S 11,90 €

Wed, 29 Jul 2026 15:31:20 +0200

Reinforced plastic servo arm set with 25T toothing

Suitable for mini and standard servos / 35 - 40mm Servos with Ø5,9mm 25T toothing:

- Futaba Servos
- Savöx Servos
- Align Servos
- BK Servos
- Outrage Servos
- MKS Servos
- KST Servos
- Nexspor Servos

The ideal servo arm for SAB Goblin 500 - 770, OXY 5, Soxos 550-800, Align T-REX 500 - 800 and many more ...

Content:

4x NEXSPOR Servo Arm Reinforced 25T 5,9mm

Align 70mm Carbon Fiber Tail Blade # HQ0700D 22,99 €

Mon, 23 Mar 2026 21:32:37 +0100

3K carbon fiber made, new light-weight design, improve the efficiency of tail blade to make more precision on tail rudder control.

Shape: Symmetrical wing
Length: 70mm
Width: 4.9mm
Shaft Diameter: 3mm
Weight: 7g/set

Spare part suitable for:
Align T-REX 500

SpinBlades Black Belt 435 mm # 2632435 56,50 €

Mon, 23 Mar 2026 21:32:37 +0100

As already announced, we are proud to introduce an evolution in blade design and this is our new Black Belt range of performance blades.Listening to the requirements and wishes of our customers, utilizing the combined expertise of our team pilots, the knowhow of the designer and the technicians in our production department we are certain that this new design and production method will set new boundaries and help pilots create ever more demanding and breathtaking performances.
This unique airfoil has been selected to compliment the ever demanding needs of modern machines both Nitro and electric. We have created a blade which has optimum aerodynamic capability by having a constant drag factor over the entire blade length which by design has increased efficiency dramatically (test runs in the wind tunnel have proved a drag reduction of 30% has been achieved). Therefore cyclic reaction times are sharper and faster than previous Spin designs with greater acceleration and deceleration compared to the other conventional blade on the market.
Weâ??ve also improved the blade production process. The bolt hole will no longer be drilled but is now constructed during the layering process in our factory. By doing this, the fibers will not be cut or destroyed resulting in a higher breaking strain without adding any additional raw material or weight. We have also chosen a new carbon fiber product that has improved the overall strength of the blade and for safety reasons we have reinforced the Kevlar taking into account the constantly increasing rpm requirements that pilots demand. In the design of our blades we have for several years believed in the benefit of Kevlar compared to wire, why? This is because Kevlar forms a compact bond to carbon however wire cannot bond successfully to epoxy and given our design criteria this is simply not good enough so why should we settle for less?
Our pilots have paid special attention to the visual presence in the air and the new design maximizes the detection of flight attitudes enabling you to concentrate on your manoeuvre and less time focusing on airspace position.
As always the new Black Belt blade will be instantly recognizable retaining our unique image and unforgettable sound that will forever be associated with Spin Blades.

These Blades fit perfekt on a Gaui X4, Trex 500, Blade 500X or simular Helis in that Size.

The Price is allways per matching Set (2 balanced blades with less than 0,05g tolleranz)

root:	bolt hole:	weight/ per blade:	max rpm.	width:	forward:	profil:	direction of rod:
10mm	3mm	approx. 60 g	3200	46mm	1-2mm	Sym.	clockwise

SLS Quantum 3000mAh 6S1P 22,2V 30C/60C # SLSQ30006130 70,20 €

Tue, 16 Jun 2026 07:58:12 +0200

Technische Daten:

Spannung: 22,2V
Ausführung: 6S1P
Kapazität: 3000mAh
Dauerentladestrom: max. 30C (90A)
Kurzzeitiger Entladestrom: max. 60C (180A)
Ladestrom: max. 5C (15A)
Gewicht: ca. 431 Gramm (inkl. Kabel und Stecker)
Maße: ca. LxBxH 140 x 43 x 35mm
Balanceranschluss: XH
Stecksystem: XT60
Hauptstromkabel: AWG12
Hauptstromkabel-Länge: 12cm

Align T-REX 500L Motor Mount # H50B009XX 16,19 €

Wed, 11 Mar 2026 00:16:05 +0100

1x 500L Motor mount
4x Socket screw (M3x8mm)

Spare part suitable for:
Align T-REX 500L DOMINATOR

Align T-REX 500L Tail Boom Case # H50T002XX 12,59 €

Tue, 30 Jun 2026 17:03:53 +0200

1x Tail boom mount (Left)
1x Tail boom mount (Right)
4x Aluminum hexagonal bolt (M2.5x42.8mm)

Spare part suitable for:
Align T-REX 500L DOMINATOR

Align T-REX 500L Metal Shapely Reinforcement Plate # H50B010XX 20,69 €

Wed, 11 Mar 2026 00:16:05 +0100

1x Shapely Reinforcement Brace (R)
1x Shapely Reinforcement Brace (L)
1x 500L Front Frame Mounting Bolt (M2.5x47mm)
4x Socket Screw (M3x8mm)
2x Socket Screw (M2.5x8mm)

Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.

Spare part suitable for:
Align T-REX 500L DOMINATOR

Align T-REX 500L Aluminum Hexagonal Bolt # H50B012XX 8,99 €

Wed, 11 Mar 2026 00:16:06 +0100

4x Aluminum hexagonal bolt(M2.5x42.8mm)

Spare part suitable for:
Align T-REX 500L DOMINATOR

Align 500L Dominator Frame Mounting Bolt # H50B014XX 5,60 €

Wed, 11 Mar 2026 00:16:06 +0100

Frame Mounting Bolt

*500L Aluminum Frame Mounting Bolt x 4(2.5x47mm)

Spare part suitable for:
Align 500L Dominator

Align T-REX 500L Metal Main Shaft Bearing Block # H50B005XX 24,29 €

Sun, 05 Apr 2026 21:15:56 +0200

2x Metal bearing holder(55x47.75x8mm)
2x Bearing MR688ZZ (Ø8xØ16x5mm)
8x Socket screw (M2.5x6mm)
12x Socket botton head screw (M2.5x8mm)

6061-T6 Aluminum alloy material and CNC processed. ?A single piece main bearing block with integrated servo mounts similar to that of T-Rex 700L, for simplified servo installation and clean aesthetic.

Spare part suitable for:
Align T-REX 500L DOMINATOR

Align 500L Dominator Linkage Ball Assembly # H50Z002XX 5,60 €

Sun, 03 May 2026 19:48:51 +0200

Linkage Ball Assembly

*Ø4.7 Linkage ball B(M2.5x3) x 1 (4.75x25.25mm)
*500 Linkage ball B(M2.5x3) x 2 (Ø4.75x9.77mm)
*500 Linkage ball A(M2.5x3.5) x 2 (Ø4.75x8.18mm)
*Ø4.7 Linkage ball E(M2.5x2.5) x 2 (Ø4.75x11.5mm)
*Linkage ball A(M2x3.5) x 1 (Ø4.75x8.18mm)
*Linkage ball C(M2x4) x 1 (Ø4.75x13mm)

Spare part suitable for:
Align 500L Dominator

Align DS530 / DS530M Servo Gear Set # HSP53002 23,19 €

Mon, 01 Dec 2025 09:38:43 +0100

Gear Set

1x DS530 gear G1
1x DS530 gear G2
1x DS530 gear G3
1x DS530 gear G4
1x DS530 gear G5

Spare part suitable for:
Align DS530 / DS530M Servo

Align DS535 / DS535M Servo Gear Set # HSP53502 23,19 €

Wed, 11 Mar 2026 00:16:34 +0100

Gear Set

1x DS535 gear G1
1x DS535 gear G2
1x DS535 gear G3
1x DS535 gear G4
1x DS535 gear G5

Spare part suitable for:
Align DS535 / DS535M Servo

Align T-REX 500 78 Tail Blade # HQ0773A 13,89 €

Sun, 12 Apr 2026 11:37:32 +0200

78 Tail Blade

Shape: Symmetrical wing
Length:78mm
Width:4.9mm
Shaft Diameter:3mm
Weight:20g/set

Spare part suitable for:
Align T-REX 500

Align Linkage Ball-A Hardware BagN T-Rex 600 # HN6052 11,59 €

Thu, 15 Jan 2026 11:07:57 +0100

Steel ball parts is made of rigid stainless steel, features wear-resisting, and anti-oxidization. Therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.
Linkage ball A(M2x3.5) x 9(Ø4.75x8.18mm)
M2 nut x 9

Align 425 Carbon Fiber Blades # HD420F 31,19 €

Sun, 11 Jan 2026 20:46:28 +0100

425 Carbon Fiber Blades

●Shape: Symmetrical wing
●Length:425x42x5.6mm
●Width:10mm
●Shaft Diameter:3mm
●Weight:Approx 120g/set