Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Align T-Rex/T-REX 470LT DOMINATOR products

Azure Power Carbon Rotorblade 385mm 47,90 €

Thu, 09 Jul 2026 01:35:05 +0200

Azure Power Carbon Rotorblade 385mm

AZ385 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.

In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.

The AZ385 will unleash the full potential of your helicopter.

Technical Specifications:

Length:	385mm
Blade Grip:	>5mm
Hole:	3mm
Weight approx.:	45g
Width:	35,3-41,2mm
Airfoil:	Symmetric

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

THETA THS921A HV Digital Servo 64,90 €

Thu, 23 Jul 2026 14:56:34 +0200

THETA THS921A HV Digital Servo

The application range of the servo is versatile from helicopter swashplate servo 250 size to 380 size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Coreless
Operating Voltage	6V bis 8,4V


Speed at 6V	0,12 (sec/60°)
Speed at 7,4V	0,10 (sec/60°)
Speed at 8,4V	0,09 (sec/60°)


Torque at 6V	6,6 (kg/cm)
Torque at 7,4V	7,8 (kg/cm)
Torque at 8,4V	8,6 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

Accessories:
1x Servo THS921A
4x Servo horn
1x Screw M3
4x Tapping screw for servo

THETA HELI Brushless SET 3x THS921B / 1x THM982 299,90 €

Fri, 24 Jul 2026 17:20:06 +0200

THETA Helicopter Set 3x THS921B Brushless (23mm) for swashplate and the THM982 (35mm) for tail

The field of application of the servo set is for helicopters from 450 to 500 size.

THETA THM921B 23mm Brushless swashplate servo:

Specifications:


Motor	Brushless
Operating Voltage	6V bis 8,4V



Speed at 6V	0,100 (sec/60°)
Speed at 7,4V	0,090 (sec/60°)
Speed at 8,4V	0,080 (sec/60°)


Torque at 6V	7,7 (kg/cm)
Torque at 7,4V	8,9 (kg/cm)
Torque at 8,4V	9,8 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 4,9mm (Nexspor usw.)

THETA THM982 Brushless HV Servo

The application range of the servo is versatile from helicopter tail servo in 450-600 midi size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM921B
1x Servo THM982

THETA THS921B Brushless HV Digital Servo 79,90 €

Fri, 24 Jul 2026 17:10:24 +0200

THETA THS921B Brushless HV Digital Servo

The application range of the servo is versatile from helicopter swashplate servo 250 size to 420 size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	6V bis 8,4V



Speed at 6V	0,100 (sec/60°)
Speed at 7,4V	0,090 (sec/60°)
Speed at 8,4V	0,080 (sec/60°)


Torque at 6V	7,7 (kg/cm)
Torque at 7,4V	8,9 (kg/cm)
Torque at 8,4V	9,8 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

Accessories:
1x Servo THS921B
4x Servo horn
1x Screw M3
4x Tapping screw for servo

NEXSPOR BLS3507T Brushless HV Digital Servo 35mm (Tail) # BLS3507T 74,90 €

Mon, 27 Jul 2026 09:35:43 +0200

BLS3507T –Ultra fast Brushless Mini 35mm Tailservo for helicopter of the 450 – 600 class

The new Nexspor 35mm brushless servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.
The servos are characterized by high speed, positioning accuracy and a lot of power. Pleasant is also the operating noise.
The crunching and crackling is a thing of the past in the stand and under load.

The softstart protects the BEC and the mechanics of the Heilis in initialization.

Feature:

- Extremely fast tail servo
- High quality brushless motor
- High quality potentiometer
- Softstart
- High precision steel gear
- High resolution
- Full CNC aluminium case
- Dual ball bearings
- Ideal for 450 - 600 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,04 sec/60°
Speed at (7,4V)	0,033 sec/60°
Speed at (8,4V)	0,03 sec/60°
Torque at (6,0V)	5,9 kg/cm
Torque at (7,4V)	7,0 kg/cm
Torque at (8,4V)	7,5 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Dimensions (mm)	35x15x33,4
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx etc..)
Weight	49g
Connecting wire	JR225mm

Accessories:

1x Servo BLS3507T
1x Servo horn
2x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA HELI SET 3x THS921A / 1x THM982 264,90 €

Thu, 23 Jul 2026 14:56:34 +0200

THETA Helicopter Set 3x THS921A (23mm) for swashplate and the THM982 (35mm) for tail

The field of application of the servo set is for helicopters from 450 to 500 size.

THETA THM921A 23mm Coreless swashplate servo:

Specifications:


Motor	Coreless
Operating Voltage	6V bis 8,4V


Speed at 6V	0,12 (sec/60°)
Speed at 7,4V	0,10 (sec/60°)
Speed at 8,4V	0,09 (sec/60°)


Torque at 6V	6,6 (kg/cm)
Torque at 7,4V	7,8 (kg/cm)
Torque at 8,4V	8,6 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

THETA THM982 Brushless HV Servo


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM921
1x Servo THM982

THETA THM982 Brushless HV Servo 84,90 €

Thu, 23 Jul 2026 14:58:04 +0200

THETA THM982 Brushless HV Servo

Brushless HV servo in the 35 mm size.
The application range of the servo is versatile from helicopter tail servo in 450-600 midi size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM982
4x Servohorn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo
1x Capacitor

NEXSPOR CLS2306T HV Digital Servo (Tail) # CLS2306T 39,90 €

Tue, 28 Jul 2026 07:03:56 +0200

CLS2306T Micro 23mm Tailservo 250 - 470 class helicopter.

The servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.

The tail servo CLS2306T is extremely fast and at the same time very powerful. The high speed and power of this small servo allow you to have the maximum tail performance of your helicopter.

Feature:

High quality coreless motor
High quality potentiometer
High precision metal gear
High resolution
Full CNC aluminium case
Dual ball bearings
Ideal for 250 - 470 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,06 sec/60°
Speed at (7,4V)	0,05 sec/60°
Speed at (8,4V)	0,04 sec/60°
Torque at (6,0V)	4,2 kg/cm
Torque at (7,4V)	5,2 kg/cm
Torque at (8,4V)	6,0 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Dimensions (mm)	23x12x27,5
Output toothing	25T Ø 5,0mm
Weight	20,3g
Connecting wire	JR220mm

Ideal tail servo for: Align T-REX 250, 450, 470, OXY 2, OXY 3, OXY 4, Goblin Fireball/Comet, Protos 380, and many more....

Accessories:

1x Servo CLS2306T
4x Servo horn
1x Screw M2,3
2x Tapping screw for servo

1st Main Blades CFK 380mm FBL (orange) 41,90 €

Fri, 24 Jul 2026 20:48:01 +0200

1st Main Blades CFK 380mm FBL

Technical specifications:
blade length: 380mm
blade admission: 5mm
borehole: 3mm
Weight per blade: approx. 33g
max. rpm: 3300
blade width / depth: 35mm
profile: Fully symmetrical
direction of rotation: clockwise
number of blade: 2

1st Main Blades CFK 380mm FBL (Yellow) 41,90 €

Fri, 03 Jul 2026 16:45:40 +0200

1st Main Blades CFK 380mm FBL

1st Main Blades CFK 380mm FBL # 1stB380 34,90 €

Mon, 13 Jul 2026 13:42:43 +0200

1st Main Blades CFK 380mm FBL

ManiaX LiPo 6S 1800mAh 22.2V eXpert 45C 45,90 €

Thu, 02 Jul 2026 11:10:51 +0200

The ManiaX Power LiPo Batteries are characterized by:

- More number of cycles with less wear
- High charge rate
- High voltage under full load
- Constant voltage level
- Power until the end of the flight
- Low internal resistance
- Low heating even under full load
- Top performance / discharge rate / weight ratio

Technical specifications:
- Voltage: 22,2V
- Capacity: 1800mAh
- Discharge rate: 45C (81,0A)
- Discharge rate Peak: 90C (162,0A)
- Charging current: 1-3C Max 5C
- Dimensions H*W*L : ca. 40*35*110mm
- Weight: ca. 290g
- Balancer connector: XH
- Discharge cable length: 12cm
- Discharge cable: 12AWG
- Discharge connector: XT60

Align T-Rex 600N Hook And Loop Tape # HN6023 5,79 €

Mon, 20 Jul 2026 09:01:35 +0200

Hook and loop tape x 2(15x250mm)
Hook and loop tape x 3(10x200mm)

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) # ZB-ST-105H 1,09 €

Thu, 23 Jul 2026 11:00:04 +0200

XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) 10PCS Set # ZB-BU-105H-10 7,90 €

Sat, 30 May 2026 11:35:46 +0200

10x XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) 10PCS Set # ZB-ST-105H-10 7,90 €

Sun, 28 Jun 2026 18:04:38 +0200

10x XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) # ZB-BU-105H 1,09 €

Tue, 14 Jul 2026 22:33:33 +0200

XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Align Ball-Bearing 3X6X2,5Zz(MR63ZZ)4 Pcs. T-Rex 450 # HS1030 5,69 €

Wed, 11 Mar 2026 00:16:05 +0100

Bearing MR63ZZ x 4 (Ø3xØ6x2.5mm)

Align Ball-Bearing MR74ZZ x 2 (Ø4xØ7x2.5mm) T-Rex 450 # HS1222 5,79 €

Sat, 23 May 2026 07:02:45 +0200

Bearing MR74ZZ x 2 (Ø4xØ7x2.5mm)