Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Align T-Rex/T-REX 450 PRO V2 products

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

THETA THS921A HV Digital Servo 64,90 €

Thu, 23 Jul 2026 14:56:34 +0200

THETA THS921A HV Digital Servo

The application range of the servo is versatile from helicopter swashplate servo 250 size to 380 size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Coreless
Operating Voltage	6V bis 8,4V


Speed at 6V	0,12 (sec/60°)
Speed at 7,4V	0,10 (sec/60°)
Speed at 8,4V	0,09 (sec/60°)


Torque at 6V	6,6 (kg/cm)
Torque at 7,4V	7,8 (kg/cm)
Torque at 8,4V	8,6 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

Accessories:
1x Servo THS921A
4x Servo horn
1x Screw M3
4x Tapping screw for servo

THETA HELI Brushless SET 3x THS921B / 1x THM982 299,90 €

Fri, 24 Jul 2026 17:20:06 +0200

THETA Helicopter Set 3x THS921B Brushless (23mm) for swashplate and the THM982 (35mm) for tail

The field of application of the servo set is for helicopters from 450 to 500 size.

THETA THM921B 23mm Brushless swashplate servo:

Specifications:


Motor	Brushless
Operating Voltage	6V bis 8,4V



Speed at 6V	0,100 (sec/60°)
Speed at 7,4V	0,090 (sec/60°)
Speed at 8,4V	0,080 (sec/60°)


Torque at 6V	7,7 (kg/cm)
Torque at 7,4V	8,9 (kg/cm)
Torque at 8,4V	9,8 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 4,9mm (Nexspor usw.)

THETA THM982 Brushless HV Servo

The application range of the servo is versatile from helicopter tail servo in 450-600 midi size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM921B
1x Servo THM982

THETA THS921B Brushless HV Digital Servo 79,90 €

Fri, 24 Jul 2026 17:10:24 +0200

THETA THS921B Brushless HV Digital Servo

The application range of the servo is versatile from helicopter swashplate servo 250 size to 420 size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	6V bis 8,4V



Speed at 6V	0,100 (sec/60°)
Speed at 7,4V	0,090 (sec/60°)
Speed at 8,4V	0,080 (sec/60°)


Torque at 6V	7,7 (kg/cm)
Torque at 7,4V	8,9 (kg/cm)
Torque at 8,4V	9,8 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

Accessories:
1x Servo THS921B
4x Servo horn
1x Screw M3
4x Tapping screw for servo

NEXSPOR BLS3507T Brushless HV Digital Servo 35mm (Tail) # BLS3507T 74,90 €

Mon, 27 Jul 2026 09:35:43 +0200

BLS3507T –Ultra fast Brushless Mini 35mm Tailservo for helicopter of the 450 – 600 class

The new Nexspor 35mm brushless servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.
The servos are characterized by high speed, positioning accuracy and a lot of power. Pleasant is also the operating noise.
The crunching and crackling is a thing of the past in the stand and under load.

The softstart protects the BEC and the mechanics of the Heilis in initialization.

Feature:

- Extremely fast tail servo
- High quality brushless motor
- High quality potentiometer
- Softstart
- High precision steel gear
- High resolution
- Full CNC aluminium case
- Dual ball bearings
- Ideal for 450 - 600 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,04 sec/60°
Speed at (7,4V)	0,033 sec/60°
Speed at (8,4V)	0,03 sec/60°
Torque at (6,0V)	5,9 kg/cm
Torque at (7,4V)	7,0 kg/cm
Torque at (8,4V)	7,5 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Dimensions (mm)	35x15x33,4
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx etc..)
Weight	49g
Connecting wire	JR225mm

Accessories:

1x Servo BLS3507T
1x Servo horn
2x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA HELI SET 3x THS921A / 1x THM982 264,90 €

Thu, 23 Jul 2026 14:56:34 +0200

THETA Helicopter Set 3x THS921A (23mm) for swashplate and the THM982 (35mm) for tail

The field of application of the servo set is for helicopters from 450 to 500 size.

THETA THM921A 23mm Coreless swashplate servo:

Specifications:


Motor	Coreless
Operating Voltage	6V bis 8,4V


Speed at 6V	0,12 (sec/60°)
Speed at 7,4V	0,10 (sec/60°)
Speed at 8,4V	0,09 (sec/60°)


Torque at 6V	6,6 (kg/cm)
Torque at 7,4V	7,8 (kg/cm)
Torque at 8,4V	8,6 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

THETA THM982 Brushless HV Servo


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM921
1x Servo THM982

THETA THM982 Brushless HV Servo 84,90 €

Thu, 23 Jul 2026 14:58:04 +0200

THETA THM982 Brushless HV Servo

Brushless HV servo in the 35 mm size.
The application range of the servo is versatile from helicopter tail servo in 450-600 midi size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM982
4x Servohorn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo
1x Capacitor

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) # ZB-ST-105H 1,09 €

Thu, 23 Jul 2026 11:00:04 +0200

XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) 10PCS Set # ZB-BU-105H-10 7,90 €

Sat, 30 May 2026 11:35:46 +0200

10x XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) 10PCS Set # ZB-ST-105H-10 7,90 €

Sun, 28 Jun 2026 18:04:38 +0200

10x XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Gold Connector 3,5mm with yellow case and cover ( XT-60H ) # ZB-BU-105H 1,09 €

Tue, 14 Jul 2026 22:33:33 +0200

XT-60H 3,5mm Gold Connector 3,5mm with yellow case and cover

Hook And Loop Tape 30x60mm # K-30x60x5 2,90 €

Sun, 12 Jul 2026 17:29:36 +0200

Use Hook and Loop Tape, tape the Hook side(hooked) on the battery mounting plate and the Loop side(fuzzy) on the battery to fix the battery and avoid any slip.
Tape the Hook side (hooked) on the battery mounting plate and the Loop side (fuzzy)

SpinBlades Black Belt 320 mm # 2632320 38,50 €

Mon, 11 May 2026 19:26:37 +0200

This new high performance blade has set new Standards in efficiency and power deployment. The enormous performance of this blade has been demonstrated during several high profile international competitions including the 2014 Heli Masters World Championship won by Dunkan Bossion.

As already announced, we are proud to introduce an evolution in blade design and this is our new Black Belt range of performance blades.Listening to the requirements and wishes of our customers, utilizing the combined expertise of our team pilots, the knowhow of the designer and the technicians in our production department we are certain that this new design and production method will set new boundaries and help pilots create ever more demanding and breathtaking performances.
This unique airfoil has been selected to compliment the ever demanding needs of modern machines both Nitro and electric. We have created a blade which has optimum aerodynamic capability by having a constant drag factor over the entire blade length which by design has increased efficiency dramatically (test runs in the wind tunnel have proved a drag reduction of 30% has been achieved). Therefore cyclic reaction times are sharper and faster than previous Spin designs with greater acceleration and deceleration compared to the other conventional blade on the market.
We are also improved the blade production process. The bolt hole will no longer be drilled but is now constructed during the layering process in our factory. By doing this, the fibers will not be cut or destroyed resulting in a higher breaking strain without adding any additional raw material or weight. We have also chosen a new carbon fiber product that has improved the overall strength of the blade and for safety reasons we have reinforced the Kevlar taking into account the constantly increasing rpm requirements that pilots demand. In the design of our blades we have for several years believed in the benefit of Kevlar compared to wire, why? This is because Kevlar forms a compact bond to carbon however wire cannot bond successfully to epoxy and given our design criteria this is simply not good enough so why should we settle for less?
Our pilots have paid special attention to the visual presence in the air and the new design maximizes the detection of flight attitudes enabling you to concentrate on your manoeuvre and less time focusing on airspace position.
As always the new Black Belt blade will be instantly recognizable retaining our unique image and unforgettable sound that will forever be associated with Spin Blades.

These Blades fit perfekt on a Gaui X3, Trex 450, Blade 450X or simular Helis in that Size.

The Price is allways per matching Set (2 balanced blades with less than 0,05g tolleranz)

root:	bolt hole:	weight/ per blade:	max rpm.	width:	forward:	profil:	direction of rod:
4,5mm	3mm	approx. 25g	4000	32mm	1-2mm	Sym.	clockwise

SLS XTRON 2200mAh 3S1P 11,1V 30C/60C # SLSXT22003130 25,30 €

Wed, 01 Jul 2026 10:44:08 +0200

Technische Daten:

Spannung: 11,1V
Ausführung: 3S1P
Kapazität: 2200mAh
Dauerentladestrom: max. 30C (66,0A)
Kurzzeitiger Entladestrom: max. 60C (132.0A)
Ladestrom: max. 4C (8,8A)
Gewicht: ca. 185 Gramm (inkl. Kabel und Stecker)
Maße: ca. LxBxH 109x34x23mm
Balanceranschluss: XH
Stecksystem: XT60
Kabel: Hochstrom Silikonkabel AWG12

SLS Quantum 2200mAh 3S1P 11,1V 30C/60C # SLSQ22003130 24,90 €

Thu, 19 Mar 2026 10:40:54 +0100

Technische Daten:

Spannung: 11,1V
Ausführung: 3S1P
Kapazität: 2200mAh
Dauerentladestrom: max. 30C (66A)
Kurzzeitiger Entladestrom: max. 60C (132A)
Ladestrom: max. 5C (11A)
Gewicht: ca. 172 Gramm (inkl. Kabel und Stecker)
Maße: ca. LxBxH 108 x 34 x 22mm
Balanceranschluss: XH
Stecksystem: XT60
Hauptstromkabel: AWG12
Hauptstromkabel-Länge: 12cm

Align Ball-Bearing 3X6X2,5Zz(MR63ZZ)4 Pcs. T-Rex 450 # HS1030 5,69 €

Wed, 11 Mar 2026 00:16:05 +0100

Bearing MR63ZZ x 4 (Ø3xØ6x2.5mm)

NEXSPOR Spare Part Gear Set for DS-2304HV V1 # DS-2304HV-V1-GEAR 12,90 €

Wed, 11 Mar 2026 00:16:05 +0100

Spare Part Gear Set for Nexspor DS-2304HV V1

Align T-REX 450DFC Main Rotor Housing Set/Blue # H45163QN 18,90 €

Wed, 11 Mar 2026 00:16:05 +0100

1x 450DFC Metal Main Rotor Housing-Blue
2x 450DFC Damper Rubber (POM Ø4xØ6.5x3.8mm)
2x collar
1x Socket Button Head Collar Screw(M2x12mm)
1x Nut(M2)

Weight:5.9g

Spare part suitable for:
Align T-REX 450DFC

Align Hook And Loop Fastening Tape T-Rex 450 # HS1265 5,79 €

Sun, 19 Jul 2026 22:11:32 +0200

Hook & Loop Fastening Tape x 5(8x140mm)

Align DS455 / DS455M Servo Gear Set # HSP45502 15,49 €

Thu, 09 Jul 2026 07:47:23 +0200

Gear Set

1x DS455 gear G1
1x DS455 gear G2
1x DS455 gear G3
1x DS455 gear G4

Spare part suitable for:
Align DS455 / DS455M Servo