Live-Hobby.de/Accessories/RC Electronics/Stabilization Systems products

Spirit RS3 - Flybarles and Stabilisation System with JETI Receiver 179,90 €

Fri, 18 Sep 2026 15:40:05 +0200

Spirit RS3 – Flybarless System with Integrated JETI DUPLEX Receiver

The Spirit RS3 is a modern flybarless and stabilization unit for demanding RC helicopter pilots. It combines a powerful Spirit 3 control unit with an integrated JETI DUPLEX 2.4 GHz telemetry receiver in a particularly compact and high-quality aluminum housing.

This combination makes the setup inside the model much cleaner: fewer external components, fewer cables and particularly direct integration into the JETI system. The Spirit RS3 is ideal for pilots looking for a powerful flybarless system with full JETI DUPLEX support, extensive telemetry and modern safety functions.

Highlights

Flybarless system and receiver in one unit: Spirit 3 hardware with integrated JETI DUPLEX receiver.
Powerful ARM M7 processor: fast signal processing with high computing performance.
Integrated JETI DUPLEX 2.4 GHz telemetry receiver: full integration into JETI DUPLEX systems.
20-bit IMU motion sensor: highly precise detection of model movements up to 4000°/s.
Integrated pressure sensor: precise altitude measurement for advanced functions such as altitude hold or rescue functions.
Real-time logging: detailed recording of important flight data for analysis and diagnostics.
High vibration resistance: suitable for a wide range of helicopter types and demanding setups.
Support for JETI sensors: 2 independent telemetry ports for JETI DUPLEX sensors.
ESC telemetry support: compatible with many common ESCs such as HobbyWing, Kontronik, Castle, YGE, Scorpion, OMP Hobby, Graupner, XDFly, FlyRotor and KISS.
Governor function: suitable for electric, nitro and gasoline helicopters.
Rescue function: reliable rescue function for additional flight safety.
Bank switching: integrated flight mode / bank switching for different setups.
High-quality CNC aluminum housing: robust, anodized, sandblasted and laser-engraved.

Spirit 3 Hardware with Integrated JETI DUPLEX Receiver

The Spirit RS3 combines two central components in one compact unit: the proven Spirit 3 flybarless hardware and a fully integrated JETI DUPLEX telemetry receiver. This eliminates the need for a separate receiver, simplifies installation and reduces wiring inside the model.

Especially for JETI pilots, the RS3 is a very elegant solution, as receiver, stabilization, telemetry and FBL functions are optimally combined.

Powerful ARM M7 Processor

The Spirit RS3 is equipped with a modern 32-bit ARM M7 processor with high computing power. This provides large performance reserves for complex calculations, precise stabilization, logging and future functions.

The fast signal processing ensures a very direct, clean and controlled flight feel – from calm scale flying to dynamic 3D flying.

Precise Sensors and High Vibration Resistance

The integrated 20-bit IMU motion sensor enables very accurate detection of model movements. In combination with the Spirit algorithms, this ensures excellent stabilization and high vibration resistance.

In addition, the Spirit RS3 features a precise pressure sensor for altitude measurement. This can be used for various functions, for example altitude hold or support of the automatic rescue function.

Extensive Telemetry and Diagnostic Functions

The Spirit RS3 offers extensive telemetry and model analysis options. Via JETI DUPLEX, sensor values and important system information can be used conveniently. In addition, the system supports many common ESC telemetry protocols.

With the integrated logging function, flight data and events can be recorded. This helps with troubleshooting, setup optimization and analysis of the model’s behavior.

Rescue Function, Governor and Bank Switching

In addition to classic flybarless stabilization, the Spirit RS3 offers numerous additional functions. These include a reliable rescue function, integrated bank switching and a governor for electric, nitro and gasoline helicopters.

This makes the RS3 a versatile and powerful solution for scale pilots and beginners as well as experienced 3D pilots.

Technical Specifications

Product	Spirit RS3
Function	Flybarless and stabilization unit with integrated JETI DUPLEX receiver
Housing	CNC-machined, anodized and sandblasted aluminum housing
Color	Red / black, matte
Material	AL6061-T6 aluminum
Dimensions	36.8 × 27.15 × 15.8 mm
Weight	19 g
Power Supply	3.2 – 10 V @ 55 mA
Operating Temperature	-10 °C to 60 °C
Processor	32-bit ARM M7, 468 DMIPS
Sensors	MEMS sensor with 20-bit IMU, rotation up to 4000°/s
Receiver	Integrated JETI DUPLEX 2.4 GHz telemetry receiver
Antennas	2 × 20 cm full-range antennas
Output Power	max. 15 dBm
Receiver Sensitivity	-106 dBm
Telemetry Ports	2 independent ports for JETI DUPLEX sensors
Connections	3 × power supply, 4 × servo outputs
Servo Support	1520 / 960 / 760 µs @ 50 – 700 Hz
Swashplate Mixing	CCPM 90° / 120° / 135° / 140°

Supported Functions

Flybarless stabilization for RC helicopters
Support for traditional flybar mechanics
Flybar simulation
Spectrum analysis for model diagnostics
Flight log with event recording
Setup wizard for easy configuration
Smartphone and tablet support via Bluetooth or WiFi, modules sold separately
Full integration and telemetry with JETI DUPLEX
Support for all JETI DUPLEX transmitters
Support for all JETI DUPLEX sensors
Support for backup DUPLEX receivers
JETIBOX support
ESC telemetry support
GeoLink support for GPS/GNSS, vario and logger
Stabilization for scale pilots and beginners
Reliable rescue function
Integrated bank switching
Governor for electric, nitro and gasoline helicopters
BEC tester with load test
Spirit Aero support from Aero firmware 1.9.1

Included in Delivery

Spirit RS3 unit
USB interface
Bind plug
4 × 3M VHB double-sided adhesive pads

Spirit 3 - Flybarles and Stabilisation System 99,90 €

Fri, 18 Sep 2026 12:18:34 +0200

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

It packs native telemetry support for Futaba S.BUS2, FrSky S.PORT, F.Port and F.BUS including ELRS protocols. Without any special cables.

Real-Time Logging capability

Logging of everything - that is now possible for the first time! Until now, logging at 500Hz rate was barely possible. That is not an issue anymore. Thanks to durable Dedicated Memory Chip with long-life!

You can see how your model was flying in the air! In 3D graphics.

Pressure Sensor

Yes, it is there and fully embedded. Unparalleled precision of 1 Pascal allow extremely precise altitude measurement . With the innovative algorithms and Sensor Fusion technology the precision goes further down. It can be utilized in a various of ways such as Altitude Hold or even Automatic Rescue system.

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit 3 design was enhanced to minimize voltage drops even for a peripherals!

Simplified Wiring

Our aim is simplicity. This mean you no longer need a special cables such as FrSky Integration cable or even JETI Integration cable. It can be replaced just with normal stright one. Same as for Spirit GT.

Gold-plated PCB

We care about reliability a lot. For big scale helicopters of 800 class or more extreme current amperage can develop. With Spirit 3 connectors all losses are minimized.

Extensions

Spirit 3 can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit 3 it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

For Helicopters and Fixed Wings

Spirit 3 was designed for 250 – 800 class helicopters and medium size fixed wing models. It is perfect match for the most available R/C models.

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x27.15x13.9mm, weight: 18g
Power supply: 2 - 15V @ 50mA
Operating temperature: -10°C to 60°C
Latest generation, Ultra Fast ARM processor: 462 DMIPS
IMU MEMS sensor with 20bit precision
(rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
Integrated S-BUS Inverter
Integrated FrSky Integration cable
Setup directly from radio with common brands
2x native Spektrum connectors
3x connector for power supply, 4x for servos
Revolutionary GeoLink support (GPS, vario, logger)
Spirit Aero support (coming soon)
All-pin protection
Redundant internal powertrain for maximum safety
Excessive tolerance for brown-outs
Dedicated capacitor for peripheral voltage stability
Simplified JETI receiver wiring
Embedded Pressure sensor
Dedicated Memory Chip for Real-Time logging
Samtec Pin headers for high current transmission

Features

Super-smooth flight control
Paddle simulation with inexpressible feeling
Classic flybar mechanics support
Extreme vibration immunity for all helicopter types
Spectrum analysis for model diagnostics
Flight log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spektrum, Jeti, OpenTX and HoTT radio integration
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured rescue system
Integrated Bank Switching
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, XDFly, Graupner
Governor for Electric, Nitro and Gasser Helicopters
BEC tester with load verification
Support for PWM, PPM, S-BUS, FrSky F.Port,
Spektrum DSM2/DSMX, JETI Duplex EX Bus,
SRXL/Graupner SUMD/JETI UDI/JR X-Bus,
F.BUS, CRSF, ELRS, Spirit RX receivers
Support for all servo types:
1520/960/760us @ 50 - 700Hz
Support for CCPM 90/120/135/140°
Real-Time telemetry log
Perfect flight log with 3D visualisation
Servo extension board for 8 servos and more

Manual

Available at the Wiki pages.

Package content

Spirit 3 unit
USB interface
15cm receiver cables
10cm 3M VHB doublesided adhesive tape

Spirit GTR - Flybarles and Stabilisation System with JETI Receiver 269,90 €

Sun, 05 Jul 2026 22:49:58 +0200

Spirit GTR is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ

It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit GTR consists from Spirit GT hardware and JETI Duplex receiver.

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

Real-Time Logging capability

Version 3.3 will unlock all these capabilities. For the first time in the history, you will be able to see how your model was flying in the air! In 3D graphics.

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit GTR design was enhanced to minimize voltage drops even for a peripherals!

Extensions

Spirit GTR can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit GTR it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x29.6x15.8mm, weight: 23g
Power supply: 3.2 - 10V @ 55mA
Operating temperature: -10°C to 60°C
Latest generation, Ultra Fast
32bit ARM processor: 468 DMIPS
MEMS sensor with 20bit IMU (rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
2x independent telemetry ports for JETI DUPLEX sensors
3x connector for power supply, 5x for servos
All-pin protection
Redundant internal power chain for maximum safety
Excessive tolerance for brown-outs
Embedded JETI DUPLEX 2.4 Ghz Telemetry Receiver
Precise Pressure Sensor for Altitude Measurement
RealTime Logging Feature for detailed flight recording
2x 20cm Full-range antennas
Max. output power: 15 dBm
Receiver sensitivity: -106 dBm

Features

Super-smooth flight control
Paddle simulation with inexpressible feeling
Classic flybar mechanics support
Extreme vibration immunity for all helicopter types
Spectrum analysis for model diagnostics
Flight log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Full integration and telemetry with JETI DUPLEX
Supported by all JETI DUPLEX radios
Support for all JETI DUPLEX sensors
Support for backup DUPLEX receiver
Support for JETIBOX
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner
Revolutionary GeoLink support (GPS/GNSS, vario, logger)
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured rescue system
Integrated Bank Switching
Governor for Electric, Nitro and Gasser Helicopters
BEC tester with load verification
Spirit Aero support (from 1.5.0 Aero firmware)
Support for all servo types:
1520/960/760us @ 50 - 700Hz
Support for CCPM 90/120/135/140°

Package content

Spirit GTR unit
USB interface
Bind plug
3x 3M VHB doublesided adhesive tape

Manual available at the Wiki pages.

Spirit W1 - Flybarles and Stabilisation System with Wave Receiver 269,90 €

Wed, 16 Sep 2026 12:52:42 +0200

Spirit W1 is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ

It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit W1 consists from Spirit GT hardware and Spirit Wave receiver.

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

Real-Time Logging capability

VFor the first time in the history, you will be able to see how your model was flying in the air!

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit W1 design was enhanced to minimize voltage drops even for a peripherals!

Extensions

Spirit W1 can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit W1 it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

Highlights

Control part

For Helicopters and Planes
Spirit Governor
Top-notch 20-bit IMU Sensor
Performance-line ARM F7 processor
Precise pressure sensor for Altitude measurement
Dedicated Memory Chip for detailed logging

Receiver part

Spirit Wave 2.4Ghz full-range telemetry receiver
Full featured 30+ channels available
Blazing fast 333 Hz transmission
High interference immunity
BEC Voltage measurement

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x29.6x15.8mm, weight: 23g
Power supply: 3 - 15V @ 55mA
Operating temperature: -10°C to 50°C
Latest generation, Ultra Fast
32bit ARM processor: 468 DMIPS
MEMS sensor with 20bit IMU (rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
2x independent telemetry ports for Spirit Wave sensors
3x connector for power supply, 5x for servos
All-pin protection
Redundant internal power chain for maximum safety
Excessive tolerance for brown-outs
Embedded Spirit RX 2.4 Ghz Telemetry Receiver
Precise Pressure Sensor for Altitude Measurement
RealTime Logging Feature for detailed flight recording
2x 20cm Full-range antennas
Max. output power: 30 dBm
Receiver sensitivity: -106 dBm
Third-party receiver supported – Wave receiver can be turned off
Replaceable and Detachable Antennas

Features

Super-Smooth Flight control
Paddle Simulation with inexpressible feeling
Classic Flybar Mechanics support
Extreme vibration immunity for all helicopter types
Spectrum Analysis for model diagnostics
Flight Log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spirit RX Telemetry
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner
ESC Setup (selected brands) with Spirit Wave
Revolutionary GeoLink support (GPS/GNSS, vario, logger)
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured and highly proven Rescue system
Integrated Bank Switching
Automatic Rescue Mode
Governor for Electric, Nitro and Gasser Helicopters
BEC Tester with load verification
Spirit Aero support
Support for all servo types:
1520/960/760us @ 50 - 700Hz
CCPM 90/120/135/140°, Mechanical Mix and 45° Phasing

Package content

Spirit W1 unit
USB interface (1m)
Bind plug
4x 3M VHB doublesided adhesive tape

Manual available at the Wiki pages.

Spirit W3 - Flybarles and Stabilisation System with Wave Receiver 129,90 €

Fri, 18 Sep 2026 17:10:24 +0200

Spirit W3 is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ

It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit W3 consists from Spirit 3 hardware and Spirit Wave receiver.

Manual available at the Wiki pages.

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

Real-Time Logging capability

VFor the first time in the history, you will be able to see how your model was flying in the air!

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit W3 design was enhanced to minimize voltage drops even for a peripherals!

Highlights

Control part

For Helicopters and Planes
Spirit Governor
Top-notch 20-bit IMU Sensor
Performance-line ARM F7 processor
Precise pressure sensor for Altitude measurement
Dedicated Memory Chip for detailed logging

Receiver part

Spirit Wave 2.4Ghz full-range telemetry receiver
Full featured 30+ channels available
Blazing fast 333 Hz transmission
High interference immunity
BEC Voltage measurement

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x27.15x15.8mm, weight: 23g
Power supply: 3 - 15V @ 55mA
Operating temperature: -10°C to 50°C
Latest generation, Ultra Fast
32bit ARM processor: 468 DMIPS
MEMS sensor with 20bit IMU (rotation up to 4000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
2x independent telemetry ports for Spirit Wave sensors
3x connector for power supply, 4x for servos
All-pin protection
Redundant internal power chain for maximum safety
Excessive tolerance for brown-outs
Embedded Spirit RX 2.4 Ghz Telemetry Receiver
Precise Pressure Sensor for Altitude Measurement
RealTime Logging Feature for detailed flight recording
2x 20cm Full-range antennas
Max. output power: 30 dBm
Receiver sensitivity: -106 dBm
Third-party receiver supported – Wave receiver can be turned off
Replaceable and Detachable Antennas

Package content

Spirit W3 unit
USB interface (1m)
Bind plug
4x 3M VHB doublesided adhesive tape

Warranty

2 year warranty for the original purchaser
50% discount for damage replacement of the unit

Features

Super-Smooth Flight control
Paddle Simulation with inexpressible feeling
Classic Flybar Mechanics support
Extreme vibration immunity for all helicopter types
Spectrum Analysis for model diagnostics
Flight Log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spirit RX Telemetry
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner, XDfly
ESC Setup (selected brands) with Spirit Wave
Revolutionary GeoLink support (GPS/GNSS, vario, logger)
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured and highly proven Rescue system
Integrated Bank Switching
Automatic Rescue Mode
Governor for Electric, Nitro and Gasser Helicopters
BEC Tester with load verification
Spirit Aero support
Support for all servo types:
1520/960/760us @ 50 - 700Hz
CCPM 90/120/135/140°, Mechanical Mix and 45° Phasing

Availability

Shipped within 31 - 62 days from Order Date
Order can be cancelled anytime before shipment

FCC compliance

FCC ID: 2AW4Z-SPIRITW1

Displayed prices are Tax excl. for all non-logged users.

Spirit GT - Flybarles and Stabilisation System 229,90 €

Wed, 16 Sep 2026 07:46:11 +0200

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

It packs native telemetry support for Futaba S.BUS2 and even FrSky S.PORT or brand new F.Port protocols. Without any special cables.

Real-Time Logging capability

For the first time in the history, you can see how your model was flying in the air! In 3D graphics.

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit GT design was enhanced to minimize voltage drops even for a peripherals!

Simplified Wiring

Our aim is simplicity. This mean you no longer need a special cables such as FrSky Integration cable or even JETI Integration cable. It can be replaced just with normal stright one.

Gold-plated Connectors

We care about reliability a lot. For big scale helicopters of 800 class or more extreme current amperage can develop. With Spirit GT connectors all losses are minimized.

Extensions

Spirit GT can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit GT it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x29.6x13.9mm, weight: 20g
Power supply: 3 - 15V @ 50mA
Operating temperature: -10°C to 60°C
Latest generation, Ultra Fast ARM processor: 462 DMIPS
IMU MEMS sensor with 20bit precision
(rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
Integrated S-BUS Inverter
Integrated FrSky Integration cable
2x native Spektrum connectors
3x connector for power supply, 5x for servos
Revolutionary GeoLink support (GPS, vario, logger)
Spirit Aero support (from 1.6.0 Aero firmware)
All-pin protection
Redundant internal powertrain for maximum safety
Excessive tolerance for brown-outs
Dedicated capacitor for peripheral voltage stability
Simplified JETI receiver wiring
Embedded Pressure sensor
Dedicated Memory Chip for Real-Time logging
Gold-plated pin headers for high current transmission

Features

Super-smooth flight control
Paddle simulation with inexpressible feeling
Classic flybar mechanics support
Extreme vibration immunity for all helicopter types
Spectrum analysis for model diagnostics
Flight log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spektrum, Jeti, OpenTX and HoTT radio integration
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured rescue system
Integrated Bank Switching
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner
Governor for Electric, Nitro and Gasser Helicopters
BEC tester with load verification
Support for PWM, PPM, S-BUS, FrSky F.Port,
Spektrum DSM2/DSMX, JETI Duplex EX Bus,
SRXL/Graupner SUMD/JETI UDI/JR X-Bus receivers
Support for all servo types:
1520/960/760us @ 50 - 700Hz
Support for CCPM 90/120/135/140°
Real-Time telemetry log
Perfect flight log with 3D visualisation
Servo extension board for 8 servos and more

Manual

Available at the Wiki pages.

Package content

Spirit GT unit
USB interface
15cm receiver cables
4x 3M VHB doublesided adhesive tape

Graupner Hawk 12 HoTT receiver with 3-axis gyro and Vario (6-channel) # S1052 179,90 €

Sat, 12 Sep 2026 10:25:46 +0200

Description "GRAUPNER Hawk 12 HoTT receiver with 3-axis gyro and Vario (6-channel)"

With the Hawk 12, Graupner presents a powerful 6-channel receiver with integrated 3-axis gyro and particularly vibration-insensitive 3-axis acceleration sensor, diversity antennas, vario and attitude mode for fixed-wing models or rescue mode and attitude mode for helicopters.

With GRAUPNER HoTT 2.4GHz technology, the receiver has a secure hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. The receiver transmits the parameters "receiver voltage", "receiver temperature", "signal strength", "altitude", "altitude difference (vario)" to the transmitter without additional sensors. It is also possible to transmit the Euler angles to the transmitter and display them there.

The antenna amplifier together with the antenna diversity ensures an enormous range. The faster 32-bit L4 processor guarantees energy-saving operation and the higher performance ensures that the Hawk 12 can also be used as a flybarless system for helicopters and as a flight controller for copters. Of course, the integrated Hawk gyro system can also be used perfectly for fixed-wing models. There are 4 different gyro modes: OFF, normal stabilization, heading lock, gyro rate mode and attitude mode. When set correctly, the gyro rate mode enables knife-edge flight and torquing without control corrections. Extremely quick, easy and convenient to set via the Hott transmitter telemetry menu.

Just like its namesake, the falcon, the Hawk 12 embodies determination, power and precision. Go on the hunt for the perfect flight with the Hawk.

Wing models

* Stabilization of the flight model in difficult wind conditions for up to 3 axes
* Natural flight behavior due to proportional gyro suppression
* The 3-axis gyro means that even difficult-to-control aerobatic models can be flown very smoothly and aerobatics are extremely simplified
* Flight figures can be flown much more cleanly
* 4 different gyro modes: OFF, normal stabilization, heading lock, turn rate mode for particularly easy knife-edge flight and simple torquing as well as attitude mode
* Simple setting of the gyro assignment
* Parameter setting via HoTT telemetry
* Software with attitude mode enables easy landings even in difficult wind conditions
* 5 free mixers
* SUMD output for connection to flybarless systems, flight controllers or a power box.
* SUMDIN input for redundant receiver operation.

Flybarless system for helicopters

* Rescue mode and attitude mode for helicopters
* Basic setting completed in just a few minutes via HoTT telemetry
* Fast and innovative axis assignment for flexible installation direction
* Extremely space-saving due to size, weight and elimination of cables, making it easy to store
* Special vibration-resistant 3-axis sensors of the latest generation
* Swashplate pirouette optimization and direction of tail torque compensation are detected automatically
* All common heli swashplates 90/120/135/140 degrees and 90 degrees 4 servos
* Adjustable swashplate rotation up to 90 degrees for multi-blade heads
* Clear standard menu and selectable expert menu if required
* Sensitivity parameters can also be adjusted during flight to speed and style depending on flight phase via encoder
* Super-fast due to elimination of transmission time from receiver to flybarless system
* Very direct control feel

Programming for helicopters

* Simple programming of the basic settings via telemetry.
* Pirouette optimization is determined automatically from the parameters and works extremely well.
* Extreme flight stability with full 3D capability even with the basic settings.
* The effect for the tail and swashplate can be easily set via the telemetry menu or via selectable encoders.
* Further optimization options in expert mode for personal flying style and personal requirements.
* Extremely simple adjustment of the basic settings via telemetry:
* Rotor rotation direction
* Swashplate type
* Swashplate frequency 50...200 Hz
* Swashplate direction
* Swashplate servo centers Servo 1...3 (4)
* Set swashplate cycl. travel to 8°
* Swashplate pitch travel A/B
* Swashplate limit
* Swashplate rotation
* Tail servo center pulse 760µs, 960µs, 1.5 ms
* Tail servo frequency 50...333 Hz
* Tail servo center position
* Rescue pitch
* Expo yes/no
* Logging for service purposes or for the Euler angle display
* Expert mode yes/no
* Simple gyro axis assignment
* Gyro effect for tail and swashplate via telemetry or adjustable encoders.
* Additional parameters can be set in expert mode.

Flight control for copters

* Copter software Q07 with Dshot controller protocol can be loaded via software update
* Basic setup completed in just a few minutes via the telemetry menu
* Fast and innovative axis assignment for flexible installation direction
* Special vibration-resistant 3-axis sensors of the latest generation
* The housing protects the electronics in the event of a crash. The special double-sided adhesive tape additionally dampens vibrations.
* 8kHz gyro frequency, multishot and fast PID control routines as well as new software filters ensure a perfect flying experience.
* D-Shot with turtle mode.
* Quadrotype XI (Quadrocopter X with reverse prop rotation direction), which has proven itself especially in FPV races, so that the lens remains clear and the props turn away from the obstacle.
* When the S8437 GPS sensor is connected to K5/Telemetry and K5 is set to SENSOR, the functions are also available: Hold GPS with altitude hold, Come home and Fly waypoints (with HoTT Viewer app and USB OTG cable) are available.
* Telemetry support for own Hott sensors and Hott sensors from other providers
* SUMD output for other flybarless receivers.
* SUMDIN input for redundant receiver operation.
* Voltage input for external voltage divider, e.g. already included in the S3082 and S3083 controllers.
* Suitable for HV. Input voltage range 3.6...8.4 V
* Can be programmed and operated with all previously available HoTT transmitters with telemetry

Technical data

* Channels: 6
* Approx. dimensions: 36 x 22 x 12 mm
* Weight approx.: 10 g
* Frequency: 2400 ... 2483.5 MHz
* Modulation: 2.4 GHz FHSS
* Range: approx. 4000 m
* Power consumption: 70 mA
* Operating voltage: 3.7V to 8.4V
* Antenna length: 2x wire 145 (antenna 30) mm
* Temperature range: -15 to +70°C

Graupner Hawk 18 HoTT receiver with 3-axis gyro and Vario (9-channel) # S1053 199,90 €

Mon, 01 Dec 2025 09:38:48 +0100

GRAUPNER Hawk 18 HoTT receiver with 3-axis gyro and Vario (9-channel)

With the Hawk 18, Graupner presents a powerful 9-channel receiver with integrated 3-axis gyro and particularly vibration-resistant 3-axis acceleration sensor, diversity antennas, vario and attitude mode for fixed-wing models or rescue mode and attitude mode for helicopters.

With GRAUPNER HoTT 2.4 GHz technology, the receiver has a secure hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. The receiver transmits the parameters "receiver voltage", "receiver temperature", "signal strength", "altitude", "altitude difference (vario)" to the transmitter without additional sensors. It is also possible to transmit the Euler angles to the transmitter and display them there.

The antenna amplifier together with the antenna diversity ensures an enormous range. The faster 32-bit L4 processor guarantees energy-saving operation and the higher performance ensures that the Hawk 18 can also be used as a flybarless system for helicopters and as a flight controller for copters. Of course, the integrated Hawk gyro system can also be used perfectly for fixed-wing models. There are 4 different gyro modes: OFF, normal stabilization, heading lock, gyro rate mode and attitude mode. When set correctly, the gyro rate mode enables knife-edge flight and torquing without control corrections. Extremely quick, easy and convenient to set via the Hott transmitter telemetry menu.

Just like its namesake, the falcon, the Hawk 18 embodies determination, power and precision. Go on the hunt for the perfect flight with the Hawk.

Wing models

* Stabilization of the flight model in difficult wind conditions for up to 3 axes
* Natural flight behavior due to proportional gyro fade-out
* The 3-axis gyro means that even difficult-to-handle aerobatic models can be flown very smoothly and aerobatics are extremely simplified*
* Flight figures can be flown much more cleanly
* 4 different gyro modes: OFF, normal stabilization, heading lock, turn rate mode for particularly easy knife-edge flight and simple torquing as well as attitude mode
* Simple setting of the gyro assignment
* Parameter setting via HoTT telemetry
* Software with attitude mode enables easy landings even in difficult wind conditions
* 5 free mixers
* SUMD output for connection to flybarless systems, flight controllers or a power box.
* SUMDIN input for redundant receiver operation.

Flybarless system for helicopters

* Rescue mode and attitude mode for helicopters
* Basic setting completed in a few minutes via HoTT telemetry
* Fast and innovative axis assignment for flexible installation direction
* Extremely space-saving due to size, weight and elimination of cables, making it easy to store
* Special vibration-resistant 3-axis sensors of the latest generation
* Swashplate pirouette optimization and direction of tail torque compensation are detected automatically
* All common heli swashplates 90/120/135/140 degrees and 90 degrees 4 servos
* Adjustable swashplate rotation up to 90 degrees for multi-blade heads
* Clear standard menu and selectable expert menu if required
* Sensitivity parameters can also be adjusted during flight to speed and style depending on flight phase via encoder
* Super-fast due to elimination of transmission time from receiver to flybarless system
* Very direct control feel

Technical data

* Channels: 9
* Approx. dimensions: 46 x 21 x 14 mm
* Weight approx.: 14 g
* Frequency: 2400 ... 2483.5 MHz
* Modulation: 2.4 GHz FHSS
* Range: approx. 4000 m
* Power consumption: 70 mA
* Operating voltage: 3.7V to 8.4V
* Antenna length: 2x wire 145 (antenna 30) mm
* Temperature range: -15 to +70°C

Spektrum USB-Interface AS3X Receiver Programming Cable # SPMA3065 29,99 €

Mon, 08 Jun 2026 08:32:25 +0200

Jetzt können SIe Ihre gesamte Flotte mit AS3X ausstatten. Vom kleinen Schaumflieger bis zum Warbird Großmodell kann jedes Flugzeug von der Präzision und Stabilität der neuen Generation von AS3X Empfängern profitieren.

Wie Ihre Vorgänger kombinieren sie das Stabilisierungssystem und den DSMX-Empfänger in einer kompakten Einheit. Worin sie sich jedoch erheblich unterscheiden, ist die Art, in der sie programmiert werden. Ab sofort gibt es eine komfortable iOS App und ein entsprechendes Kabel für den Anschluss an die Kopfhörerbuchse ihres mobilen Endgerätes. In Kürze folgen die Software für Android und PCs. Mit diesem Kabel werden Setup und Installation des Systems jetzt einfach und intuitiv.

Features:

AR636 App-kompatibler AS3X Empfänger
Interfacekabel für mobile Endgeräte und und PCs ab sofort erhältlich
Kostenlose AS3X App für iPhone/iPad ab sofort erhältlich
Demnächst erhätlich: Kostenlose App für Android (Juli) und PCs (August)
Demnächst erhältlich: AR6335 und AR7350 AS3X-Empfänger

Spektrum AS5430L DSMX 5-Channel Receiver with AS3X # SPMAS5430L 86,99 €

Wed, 11 Mar 2026 00:16:33 +0100

AS5430L DSMX 5-CH AS3X Recevier w/Break: UMX Radian

BavarianDEMON CORTEXpro # 96022 339,00 €

Mon, 31 Aug 2026 09:58:56 +0200

BavarianDEMON CORTEXpro # 96022

CORTEX pro (3-axis fixed-wing gyro)

With the introduction of the CORTEXpro, bavarianDEMON opens up the next generation's gate of 3-axis stabilization systems for fixed-wing aircraft.

Based on the latest 32-bit CPU technology and in addition to all state-of-the-art features, the CORTEXpro offers a bunch of great new options for more flexibility, compatibility, comfort in flight and setup.

The combination of easy programming and basic setup without software, automatic signal type detection, compatibility with all common analog and digital serial protocols, as well as the dual and redundant serial input and output option, are absolutely unique.

Let the DEMON take control over your cockpit and test the CORTEXpro now! More fun, more safety, more comfort – presumably, only your breath will backpedal...

Features

Multi protocoll input and output
Latest 32-bit technology
Up to 24 channels, 16 stabilized
Receiver redundancy for 2 inputs
Jeti integration and telemetry
Easy teach-in via radio
No software needed for basic setup
iOS & Android App via Bluetooth modul

More information
Weight (net) 27 g
IMPORTANT NOTE:
Mandatory firmware update for all CORTEXpro with 1.4/1400 or lower

Delivery
CORTEXpro sensor unit
Cable loom
Mini USB cable for computer connection
Quick-Start-Guide