Live-Hobby.de/Accessories/RC Electronics/Flybarless Systems/Spirit products

Spirit 3 - Flybarles and Stabilisation System 99,90 €

Wed, 29 Jul 2026 09:42:12 +0200

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

It packs native telemetry support for Futaba S.BUS2, FrSky S.PORT, F.Port and F.BUS including ELRS protocols. Without any special cables.

Real-Time Logging capability

Logging of everything - that is now possible for the first time! Until now, logging at 500Hz rate was barely possible. That is not an issue anymore. Thanks to durable Dedicated Memory Chip with long-life!

You can see how your model was flying in the air! In 3D graphics.

Pressure Sensor

Yes, it is there and fully embedded. Unparalleled precision of 1 Pascal allow extremely precise altitude measurement . With the innovative algorithms and Sensor Fusion technology the precision goes further down. It can be utilized in a various of ways such as Altitude Hold or even Automatic Rescue system.

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit 3 design was enhanced to minimize voltage drops even for a peripherals!

Simplified Wiring

Our aim is simplicity. This mean you no longer need a special cables such as FrSky Integration cable or even JETI Integration cable. It can be replaced just with normal stright one. Same as for Spirit GT.

Gold-plated PCB

We care about reliability a lot. For big scale helicopters of 800 class or more extreme current amperage can develop. With Spirit 3 connectors all losses are minimized.

Extensions

Spirit 3 can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit 3 it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

For Helicopters and Fixed Wings

Spirit 3 was designed for 250 – 800 class helicopters and medium size fixed wing models. It is perfect match for the most available R/C models.

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x27.15x13.9mm, weight: 18g
Power supply: 2 - 15V @ 50mA
Operating temperature: -10°C to 60°C
Latest generation, Ultra Fast ARM processor: 462 DMIPS
IMU MEMS sensor with 20bit precision
(rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
Integrated S-BUS Inverter
Integrated FrSky Integration cable
Setup directly from radio with common brands
2x native Spektrum connectors
3x connector for power supply, 4x for servos
Revolutionary GeoLink support (GPS, vario, logger)
Spirit Aero support (coming soon)
All-pin protection
Redundant internal powertrain for maximum safety
Excessive tolerance for brown-outs
Dedicated capacitor for peripheral voltage stability
Simplified JETI receiver wiring
Embedded Pressure sensor
Dedicated Memory Chip for Real-Time logging
Samtec Pin headers for high current transmission

Features

Super-smooth flight control
Paddle simulation with inexpressible feeling
Classic flybar mechanics support
Extreme vibration immunity for all helicopter types
Spectrum analysis for model diagnostics
Flight log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spektrum, Jeti, OpenTX and HoTT radio integration
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured rescue system
Integrated Bank Switching
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, XDFly, Graupner
Governor for Electric, Nitro and Gasser Helicopters
BEC tester with load verification
Support for PWM, PPM, S-BUS, FrSky F.Port,
Spektrum DSM2/DSMX, JETI Duplex EX Bus,
SRXL/Graupner SUMD/JETI UDI/JR X-Bus,
F.BUS, CRSF, ELRS, Spirit RX receivers
Support for all servo types:
1520/960/760us @ 50 - 700Hz
Support for CCPM 90/120/135/140°
Real-Time telemetry log
Perfect flight log with 3D visualisation
Servo extension board for 8 servos and more

Manual

Available at the Wiki pages.

Package content

Spirit 3 unit
USB interface
15cm receiver cables
10cm 3M VHB doublesided adhesive tape

Spirit Stickers 1,50 €

Tue, 23 Jun 2026 21:36:03 +0200

Spirit Stickers

Sheet Dimension: 10x10cm

Spirit Double sided tape 3M VHB - Spirit GT/GTR/W1 5,90 €

Sun, 26 Jul 2026 16:12:45 +0200

Perfect double sided tape for Spirit GT, Spirit GTR and Spirit W1 units.

Perfect for vibration dampening

Quantity: 4 pcs
Thickness: 1.1 mm
Dimensions: 30x34 mm
Temperature range: -30°C to +150°C

Spirit Double sided tape 3M VHB - Spirit 2/3/RS 5,90 €

Wed, 01 Jul 2026 16:08:01 +0200

Perfect double sided tape for Spirit 2 and Spirit RS unit.

Perfect for vibration dampening

Thickness: 1.1 mm
Dimensions: 27x130 mm
Temperature range: -30°C to +150°C

Spirit Double-sided tape 3M VHB - GeoLink 4,90 €

Sun, 21 Jun 2026 15:05:47 +0200

High quality double sided tape for GeoLink modules.

Perfect for super strong mounting at the model.

Quantity: 2 pcs
Thickness: 1.1 mm
Dimensions: 45x26 mm
Temperature range: -30°C to +150°C

Spirit GeoLink Holder V2 21,90 €

Thu, 16 Jul 2026 17:46:49 +0200

Suitable as Tail Boom mounting solution for R/C helicopters.

For boom diameter: 14 - 36 mm.

Material: Gray PVC

Package content:

1x Mounting holder
1x Cable Tie
1x 3M VHB double sided tape: 130 x 26 x 1,1 mm
1x 3M VHB double sided tape: 44 x 26 x 1,1 mm

Spirit Spirit RX Antenna 5,90 €

Thu, 23 Jul 2026 16:16:07 +0200

1pcs of Receiver Antenna.

Length: 20 cm

Connector: IPEX4 MHF

Antenna can be replaced without any special Tool.

It is required to very carefully remove previous Glue from Antenna connector. Then new antenna can be installed.

WARNING: Untrained person could damage PCB during replacement Operation!

Spirit RPM Sensor 12,90 €

Mon, 27 Jul 2026 18:59:38 +0200

RPM Sensor is specially designed for Spirit FBL units. It is compatible with all common FBL units if connectors are modified.

Package include:

- RPM Sensor with HALL detector
- 2x Neodymium Magnets 4 x 2.5 mm
- 2x Mounting Screws, washer and nuts.

Wiring: Wiring Guide

Spirit Y-cable 4,90 €

Wed, 22 Jul 2026 14:50:37 +0200

Great choice for connecting two servo cables into the one port. Can accept both JR and Futaba connector!

Wire gauge: 0.50 mm² (24 AWG)
Cable length: 10 cm (+2.5 cm connector housing)
Recommended current: 12 A (max. continuous)

Spirit JST-JST cable 50cm 4,90 €

Fri, 03 Jul 2026 15:47:43 +0200

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites.

Cable length: 50 cm

Spirit JST-JST cable 35cm 4,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites.

Cable length: 35 cm

Spirit JST-JST cable 22cm 4,90 €

Tue, 07 Jul 2026 18:32:19 +0200

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites.

Cable length: 22 cm

Spirit JST-RX adaptor 3,90 €

Wed, 24 Jun 2026 19:57:42 +0200

Cable for μSpirit units

To connect your receiver with μSpirit units you can use this adaptor cable.

Cable length: 65 mm
Recommended current: 1.5 A (max. continuous)

Spirit JST-Servo adaptor 3,90 €

Fri, 10 Jul 2026 14:34:22 +0200

Cable for μSpirit units

To connect your servo or any servo cable with μSpirit units you can use this adaptor cable.

It can be used to connect:

Servos with Servo connector

USB interface

Wifi-Link

Bluetooth module

Jeti integration cable

HoTT integration cable

FrSky interation cable

Cable length: 65 mm
Recommended current: 1.5 A (max. continuous)

Spirit Telemetry KONTRONIK V2 cable 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between Kontronik KOSMIK, JIVE PRO and KOLIBRI ESCs.

Data can be displayed and logged directly in the transmitter.

Available for:

JETI Duplex

Spektrum

Futaba

FrSky

Graupner HoTT

Cable length: 35 cm

NOTE: This cable is utilizing the primary Spektrum satellite port.

ESC Telemetry Guide

Spirit Telemetry OMP cable 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between OMP Hobby ESCs such as OMP M4.

Supported telemetry variables are:

Battery Voltage

Battery Current

Consumed Capacity

ESC Temperature

Headspeed

Cable length: 35 cm

ESC Telemetry guide: Wiki pages.

Spirit Telemetry UNI cable 8,90 €

Wed, 22 Jul 2026 14:50:37 +0200

Cable for telemetry transmission between HobbyWing V4, HobbyWing V5, Scorpion Tribunus ESCs, Kontronik JIVE.

Data can be displayed and logged directly in transmitters such as:

JETI Duplex

FrSky Taranis and Horus

Graupner HoTT

Futaba FASSTest

Wave

Cable length: 35 cm

ESC Telemetry guide: Wiki pages.

Spirit Telemetry CC cable 8V 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between Castle Creations Phoenix Edge and Talon ESCs.
Can be interfaced with all Link Live enabled ESCs.

Data can be displayed and logged directly in transmitters such as:

JETI Duplex

FrSky Taranis and Horus

Graupner HoTT

Cable length: 4 cm

Designed for BEC voltage: 7 - 8V

ESC Telemetry guide: Wiki pages

Spirit Telemetry CC cable 6V 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between Castle Creations Phoenix Edge and Talon ESCs.
Can be interfaced with all Link Live enabled ESCs.

Data can be displayed and logged directly in transmitters such as:

JETI Duplex

FrSky Taranis and Horus

Graupner HoTT

Cable length: 4 cm

Designed for BEC voltage: 5 - 6V

ESC Telemetry guide: Wiki pages

Spirit Spare USB interface 15,90 €

Sat, 18 Jul 2026 17:26:28 +0200

Spare USB interface for configuration your unit with the PC software.

Length: 1 meter

Great durability

Protection for wrong wiring

PC software available at the Spirit System web