Live-Hobby.de/Accessories/RC Electronics/Transmitter & Receiver/Telemetry/Spirit products

Spirit GeoLink Holder V2 21,90 €

Thu, 16 Jul 2026 17:46:49 +0200

Suitable as Tail Boom mounting solution for R/C helicopters.

For boom diameter: 14 - 36 mm.

Material: Gray PVC

Package content:

1x Mounting holder
1x Cable Tie
1x 3M VHB double sided tape: 130 x 26 x 1,1 mm
1x 3M VHB double sided tape: 44 x 26 x 1,1 mm

Spirit Spirit RX Antenna 5,90 €

Thu, 23 Jul 2026 16:16:07 +0200

1pcs of Receiver Antenna.

Length: 20 cm

Connector: IPEX4 MHF

Antenna can be replaced without any special Tool.

It is required to very carefully remove previous Glue from Antenna connector. Then new antenna can be installed.

WARNING: Untrained person could damage PCB during replacement Operation!

Spirit RPM Sensor 12,90 €

Mon, 27 Jul 2026 18:59:38 +0200

RPM Sensor is specially designed for Spirit FBL units. It is compatible with all common FBL units if connectors are modified.

Package include:

- RPM Sensor with HALL detector
- 2x Neodymium Magnets 4 x 2.5 mm
- 2x Mounting Screws, washer and nuts.

Wiring: Wiring Guide

Spirit Y-cable 4,90 €

Wed, 22 Jul 2026 14:50:37 +0200

Great choice for connecting two servo cables into the one port. Can accept both JR and Futaba connector!

Wire gauge: 0.50 mm² (24 AWG)
Cable length: 10 cm (+2.5 cm connector housing)
Recommended current: 12 A (max. continuous)

Spirit JST-JST cable 50cm 4,90 €

Fri, 03 Jul 2026 15:47:43 +0200

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites.

Cable length: 50 cm

Spirit JST-JST cable 35cm 4,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites.

Cable length: 35 cm

Spirit JST-JST cable 22cm 4,90 €

Tue, 07 Jul 2026 18:32:19 +0200

Spare cable for GeoLink modules and for Spektrum DSM2/X satellites.

Cable length: 22 cm

Spirit JST-RX adaptor 3,90 €

Wed, 24 Jun 2026 19:57:42 +0200

Cable for μSpirit units

To connect your receiver with μSpirit units you can use this adaptor cable.

Cable length: 65 mm
Recommended current: 1.5 A (max. continuous)

Spirit JST-Servo adaptor 3,90 €

Fri, 10 Jul 2026 14:34:22 +0200

Cable for μSpirit units

To connect your servo or any servo cable with μSpirit units you can use this adaptor cable.

It can be used to connect:

Servos with Servo connector

USB interface

Wifi-Link

Bluetooth module

Jeti integration cable

HoTT integration cable

FrSky interation cable

Cable length: 65 mm
Recommended current: 1.5 A (max. continuous)

Spirit Telemetry KONTRONIK V2 cable 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between Kontronik KOSMIK, JIVE PRO and KOLIBRI ESCs.

Data can be displayed and logged directly in the transmitter.

Available for:

JETI Duplex

Spektrum

Futaba

FrSky

Graupner HoTT

Cable length: 35 cm

NOTE: This cable is utilizing the primary Spektrum satellite port.

ESC Telemetry Guide

Spirit Telemetry OMP cable 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between OMP Hobby ESCs such as OMP M4.

Supported telemetry variables are:

Battery Voltage

Battery Current

Consumed Capacity

ESC Temperature

Headspeed

Cable length: 35 cm

ESC Telemetry guide: Wiki pages.

Spirit Telemetry UNI cable 8,90 €

Wed, 22 Jul 2026 14:50:37 +0200

Cable for telemetry transmission between HobbyWing V4, HobbyWing V5, Scorpion Tribunus ESCs, Kontronik JIVE.

Data can be displayed and logged directly in transmitters such as:

JETI Duplex

FrSky Taranis and Horus

Graupner HoTT

Futaba FASSTest

Wave

Cable length: 35 cm

ESC Telemetry guide: Wiki pages.

Spirit Telemetry CC cable 8V 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between Castle Creations Phoenix Edge and Talon ESCs.
Can be interfaced with all Link Live enabled ESCs.

Data can be displayed and logged directly in transmitters such as:

JETI Duplex

FrSky Taranis and Horus

Graupner HoTT

Cable length: 4 cm

Designed for BEC voltage: 7 - 8V

ESC Telemetry guide: Wiki pages

Spirit Telemetry CC cable 6V 8,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Cable for telemetry transmission between Castle Creations Phoenix Edge and Talon ESCs.
Can be interfaced with all Link Live enabled ESCs.

Data can be displayed and logged directly in transmitters such as:

JETI Duplex

FrSky Taranis and Horus

Graupner HoTT

Cable length: 4 cm

Designed for BEC voltage: 5 - 6V

ESC Telemetry guide: Wiki pages

Spirit Spare USB interface 15,90 €

Sat, 18 Jul 2026 17:26:28 +0200

Spare USB interface for configuration your unit with the PC software.

Length: 1 meter

Great durability

Protection for wrong wiring

PC software available at the Spirit System web

Spirit Spare Receiver cables 6,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Spare cables for the connection between unit and PWM receiver.

Length: 15 cm

Great durability

High quality

Spirit FrSky integration cable 14,90 €

Wed, 17 Jun 2026 12:55:38 +0200

You can configure your flybarless unit directly from OpenTX-based transmitter remotely without need of computer!

This solution is working from firmware 2.2.0 through PWM, PPM and S-BUS protocols.

You do not need to buy anything else, only S.PORT compatible receiver is needed.

Not needed with Spirit GT units.

Open for wide usage, without any limitations.

Configuration of the unit in real time in your transmitter.

Support in OpenTX 2.2 (will be released in the following days).

Can be used for Futaba SBUS2 telemetry transmission.

With FrSky receivers used for telemetry and integration.

For Heli and Aero firmware.

Cable lenght: 15cm

Setup guide available in the Wiki page.

Spirit HoTT integration cable 2,90 €

Tue, 14 Jul 2026 09:59:58 +0200

You can configure your flybarless unit directly from Graupner HoTT transmitter remotely without need of a computer!

You do not need to buy anything else, only HoTT compatible receiver is needed.

Open for wide usage, without any limitations.

Telemetry and configuration of the unit in real time in your transmitter

Works with all HoTT transmitters except MZ-4 and MZ-8.

For Heli and Aero firmwares.

Cable length: 15cm

For further instructions visit our Wiki page.

Spirit JETI and Spektrum integration cable 2,90 €

Sun, 19 Jul 2026 11:26:55 +0200

You can configure your flybarless unit directly from JETI Duplex transmitter remotely without need of computer!

This cable is used for connecting Spektrum SRXL2 receivers too.

With Spirit GT this cable is required only when connecting Spektrum SRXL2.

You do not need to buy anything else, only Jeti EX Bus compatible receiver or Spektrum 4649T is needed.

Telemetry and configuration of the unit in real time in your transmitter

Cable lenght: 15cm

For further instructions visit our Wiki page:
Jeti Integration
Spektrum Integration .

Spirit Spektrum SRXL2 Satellite Adapter 5,90 €

Wed, 29 Jul 2026 18:31:05 +0200

Cable for connecting Spektrum SPM4650T, SPM4651T and SPM9747 satellites at the SAT1 and SAT2 ports.

Available for µSpirit, Spirit Pro and Spirit 2, 3 units

Cable length: 22 cm

Wiring details: Wiki Guide