Live-Hobby.de/Spare Parts/Spare Parts Helicopter/SAB Goblin/SAB il Goblin RAW 700 products

Spirit RS3 - Flybarles and Stabilisation System with JETI Receiver 179,90 €

Fri, 18 Sep 2026 15:40:05 +0200

Spirit RS3 – Flybarless System with Integrated JETI DUPLEX Receiver

The Spirit RS3 is a modern flybarless and stabilization unit for demanding RC helicopter pilots. It combines a powerful Spirit 3 control unit with an integrated JETI DUPLEX 2.4 GHz telemetry receiver in a particularly compact and high-quality aluminum housing.

This combination makes the setup inside the model much cleaner: fewer external components, fewer cables and particularly direct integration into the JETI system. The Spirit RS3 is ideal for pilots looking for a powerful flybarless system with full JETI DUPLEX support, extensive telemetry and modern safety functions.

Highlights

Flybarless system and receiver in one unit: Spirit 3 hardware with integrated JETI DUPLEX receiver.
Powerful ARM M7 processor: fast signal processing with high computing performance.
Integrated JETI DUPLEX 2.4 GHz telemetry receiver: full integration into JETI DUPLEX systems.
20-bit IMU motion sensor: highly precise detection of model movements up to 4000°/s.
Integrated pressure sensor: precise altitude measurement for advanced functions such as altitude hold or rescue functions.
Real-time logging: detailed recording of important flight data for analysis and diagnostics.
High vibration resistance: suitable for a wide range of helicopter types and demanding setups.
Support for JETI sensors: 2 independent telemetry ports for JETI DUPLEX sensors.
ESC telemetry support: compatible with many common ESCs such as HobbyWing, Kontronik, Castle, YGE, Scorpion, OMP Hobby, Graupner, XDFly, FlyRotor and KISS.
Governor function: suitable for electric, nitro and gasoline helicopters.
Rescue function: reliable rescue function for additional flight safety.
Bank switching: integrated flight mode / bank switching for different setups.
High-quality CNC aluminum housing: robust, anodized, sandblasted and laser-engraved.

Spirit 3 Hardware with Integrated JETI DUPLEX Receiver

The Spirit RS3 combines two central components in one compact unit: the proven Spirit 3 flybarless hardware and a fully integrated JETI DUPLEX telemetry receiver. This eliminates the need for a separate receiver, simplifies installation and reduces wiring inside the model.

Especially for JETI pilots, the RS3 is a very elegant solution, as receiver, stabilization, telemetry and FBL functions are optimally combined.

Powerful ARM M7 Processor

The Spirit RS3 is equipped with a modern 32-bit ARM M7 processor with high computing power. This provides large performance reserves for complex calculations, precise stabilization, logging and future functions.

The fast signal processing ensures a very direct, clean and controlled flight feel – from calm scale flying to dynamic 3D flying.

Precise Sensors and High Vibration Resistance

The integrated 20-bit IMU motion sensor enables very accurate detection of model movements. In combination with the Spirit algorithms, this ensures excellent stabilization and high vibration resistance.

In addition, the Spirit RS3 features a precise pressure sensor for altitude measurement. This can be used for various functions, for example altitude hold or support of the automatic rescue function.

Extensive Telemetry and Diagnostic Functions

The Spirit RS3 offers extensive telemetry and model analysis options. Via JETI DUPLEX, sensor values and important system information can be used conveniently. In addition, the system supports many common ESC telemetry protocols.

With the integrated logging function, flight data and events can be recorded. This helps with troubleshooting, setup optimization and analysis of the model’s behavior.

Rescue Function, Governor and Bank Switching

In addition to classic flybarless stabilization, the Spirit RS3 offers numerous additional functions. These include a reliable rescue function, integrated bank switching and a governor for electric, nitro and gasoline helicopters.

This makes the RS3 a versatile and powerful solution for scale pilots and beginners as well as experienced 3D pilots.

Technical Specifications

Product	Spirit RS3
Function	Flybarless and stabilization unit with integrated JETI DUPLEX receiver
Housing	CNC-machined, anodized and sandblasted aluminum housing
Color	Red / black, matte
Material	AL6061-T6 aluminum
Dimensions	36.8 × 27.15 × 15.8 mm
Weight	19 g
Power Supply	3.2 – 10 V @ 55 mA
Operating Temperature	-10 °C to 60 °C
Processor	32-bit ARM M7, 468 DMIPS
Sensors	MEMS sensor with 20-bit IMU, rotation up to 4000°/s
Receiver	Integrated JETI DUPLEX 2.4 GHz telemetry receiver
Antennas	2 × 20 cm full-range antennas
Output Power	max. 15 dBm
Receiver Sensitivity	-106 dBm
Telemetry Ports	2 independent ports for JETI DUPLEX sensors
Connections	3 × power supply, 4 × servo outputs
Servo Support	1520 / 960 / 760 µs @ 50 – 700 Hz
Swashplate Mixing	CCPM 90° / 120° / 135° / 140°

Supported Functions

Flybarless stabilization for RC helicopters
Support for traditional flybar mechanics
Flybar simulation
Spectrum analysis for model diagnostics
Flight log with event recording
Setup wizard for easy configuration
Smartphone and tablet support via Bluetooth or WiFi, modules sold separately
Full integration and telemetry with JETI DUPLEX
Support for all JETI DUPLEX transmitters
Support for all JETI DUPLEX sensors
Support for backup DUPLEX receivers
JETIBOX support
ESC telemetry support
GeoLink support for GPS/GNSS, vario and logger
Stabilization for scale pilots and beginners
Reliable rescue function
Integrated bank switching
Governor for electric, nitro and gasoline helicopters
BEC tester with load test
Spirit Aero support from Aero firmware 1.9.1

Included in Delivery

Spirit RS3 unit
USB interface
Bind plug
4 × 3M VHB double-sided adhesive pads

SAB Goblin Flanged bearing Ø2,5 x Ø6 x2,6 # HC400-S 9,00 €

Fri, 18 Sep 2026 14:28:49 +0200

4x Flanged bearing Ø2,5 x Ø6 x2,6

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin 630 / 700 / 770 BEARING Ø5 X Ø10 X 4 # HC411-S 9,00 €

Tue, 11 Aug 2026 14:52:30 +0200

BEARING Ø5 X Ø10 X 4

Spare part suitable for:
SAB Heli Devision Goblin 630 / 700 / 770

SAB Goblin 630 / 700 / 770 THRUST BEARING Ø5X Ø10 X 4 # HC435-S 5,50 €

Tue, 11 Aug 2026 14:53:50 +0200

THRUST BEARING Ø5X Ø10 X 4

Spare part suitable for:
SAB Heli Devision Goblin 630 / 700 / 770

SAB Goblin Metric Hex NYLON Nuts M3 H4 (10pcs) # HC206-S 4,50 €

Fri, 18 Sep 2026 14:27:36 +0200

10x Metric Hex NYLON Nuts M3 H4

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Metric Hex NYLON Nuts M2,5 H3,5 (10pcs) # HC200-S 5,50 €

Fri, 18 Sep 2026 14:27:25 +0200

10x Metric Hex NYLON Nuts M2,5 H3,5

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Metric Hex NYLON Nuts M4 H5 (10pcs) # HC212-S 4,50 €

Tue, 11 Aug 2026 14:50:55 +0200

10x Metric Hex NYLON Nuts M4 H5

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Flat Head Socket Cap M3x8 (5pcs) # HC134-S 5,50 €

Wed, 02 Sep 2026 12:39:16 +0200

5x Flat Head Socket Cap M3x8

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Button Head Socket Cap M4x6 # HC096-S 5,50 €

Tue, 14 Jul 2026 13:03:58 +0200

10x Button Head Socket Cap M4x6

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M3x10 # HC056-S 5,50 €

Tue, 11 Aug 2026 14:49:07 +0200

Socket Head Cap M3x10

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Flat Head Socket Cap M2,4x5 (8pcs) # HC128-S 5,50 €

Wed, 11 Mar 2026 00:15:58 +0100

5x Flat Head Socket Cap M2,4x5

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M3x6 # HC044-S 5,50 €

Tue, 11 Aug 2026 14:48:50 +0200

Socket Head Cap M3x6

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin SOCKET HEAD CAP M3X18 SHOULD # HC079-S 6,50 €

Fri, 18 Sep 2026 14:25:36 +0200

SOCKET HEAD CAP M3X18 SHOULD

Inludes:

- DIN 12.9 Shoulder Socket Head Cap Screw M3 x 18 x 2pcs

- Metric hex locknut Nuts M3 H4 x 2pcs

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin SOCKET HEAD CAP M2,5X18 # HC032-S 5,50 €

Fri, 18 Sep 2026 14:25:20 +0200

SOCKET HEAD CAP M2,5X18

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Flat Head Socket Cap M3x5 (5 pcs) # HC132-S 5,50 €

Tue, 11 Aug 2026 14:50:18 +0200

DIN 12.9 Flat Head Socket Cap M3x5 x 5pcs

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M2,5x8 (8pcs) # HC020-S 5,50 €

Sun, 02 Aug 2026 14:49:18 +0200

8x Socket Head Cap M2,5x8

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M2,5x10 # HC022-S 5,50 €

Fri, 28 Aug 2026 12:31:06 +0200

DIN 12.9 Socket Head Cap M2,5x10

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M2,5x6 (8pcs) # HC018-S 5,50 €

Wed, 11 Mar 2026 00:15:58 +0100

8x Socket Head Cap M2,5x6

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin DOUBLE-SIDED TAPE 100x35x1 # HA035-S 5,00 €

Fri, 18 Sep 2026 14:24:40 +0200

DOUBLE-SIDED TAPE 100x35x1

Spare part suitable for:
SAB Goblin

SAB Goblin Socket Head Cap M2x6 (10pcs) # HC004-S 5,50 €

Wed, 29 Apr 2026 19:44:10 +0200

10x Socket Head Cap M2x6

Spare part suitable for:
SAB Heli Devision Goblin