Live-Hobby.de/Spare Parts/Spare Parts Helicopter/SAB Goblin/SAB Goblin Kraken 580 Nitro products

Azure Power Carbon Tailblade 95mm 25,90 €

Sun, 26 Jul 2026 12:22:54 +0200

Azure Heli Tail Blade 95mm

This high performance tail blade has an unique design with a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved great performance of your tailrotor.

Technical Specifications:

Length:	95mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	6g
Width:	26,5mm - 29,5mm
Airfoil:	Symmetric

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

XLPower High-Performance Thrust Bearing Grease for RC Helicopter # XLAC-01 5,29 €

Sun, 26 Jul 2026 17:25:19 +0200

High-Performance Thrust Bearing Grease for RC Helicopter

MS Composit RAPID2 585mm Carbon rotor blade # MS-R2-585FBL 94,90 €

Thu, 23 Jul 2026 08:14:11 +0200

MS Composit RAPID2

Rapid 2 is a new series of blades that is based on the previous Rapid line, with which it
shares a proven profile and production technology. The blades are manufactured in
precision hardened steel molds using the modern hot press molding method using top-
notch carbon prepreg materials. The blades are subsequently machined using CNC
machining technology, which guarantees high accuracy and repeatability. The new Rapid2
blades have a redesigned root shape for better folding into a blade caddy during transport.
They have an optimized center of gravity position to achieve ideal flight characteristics in a
wide range of flight conditions. And finally, a redesigned graphic design to increase
attractiveness and better visibility in the sky.

Technical specifications:
Length: 585mm
Width: 54mm
Profile thickness: 8mm
Blade grip: 12mm
Bore hole: 4mm
Weight per blade: 121g

SAB Goblin Flanged bearing Ø2,5 x Ø6 x2,6 # HC400-S 9,00 €

Thu, 02 Jul 2026 12:21:53 +0200

4x Flanged bearing Ø2,5 x Ø6 x2,6

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin FBL Rubber Pin # HC573-S 8,00 €

Mon, 27 Jul 2026 19:02:28 +0200

FBL Rubber Pin

Includes:
4 x FBL Rubber Pin

Spare part suitable for:
SAB Goblin

SAB Goblin Metric Hex NYLON Nuts M3 H4 (10pcs) # HC206-S 4,50 €

Thu, 16 Jul 2026 14:32:23 +0200

10x Metric Hex NYLON Nuts M3 H4

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Washer Ø3,3 x Ø7 x 1 (4pcs) # HC181-S 4,50 €

Wed, 11 Mar 2026 00:15:59 +0100

4x Washer Ø3,2 x Ø7 x 1

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Cup Point Set Screws M2,5x18 (5pcs) # HC140-S 5,50 €

Tue, 14 Jul 2026 13:05:00 +0200

5x Cup Point Set Screws M2,5x18

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Metric Hex NYLON Nuts M4 H5 (10pcs) # HC212-S 4,50 €

Thu, 16 Jul 2026 14:33:06 +0200

10x Metric Hex NYLON Nuts M4 H5

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin SOCKET HEAD CAP M4X10 # HC102-S 5,50 €

Wed, 11 Mar 2026 00:15:59 +0100

SOCKET HEAD CAP M4X10

Includes:

- Socket Head Cap M4 x 10 x 5pcs

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Flat Head Socket Cap M2,4x5 (8pcs) # HC128-S 5,50 €

Wed, 11 Mar 2026 00:15:58 +0100

5x Flat Head Socket Cap M2,4x5

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin SELF TAPPING SCREWS M3X10 # HC136-S 5,50 €

Thu, 30 Apr 2026 15:02:00 +0200

SELF TAPPING SCREWS M3X10

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap Shouldered M4x24 # HC111-S 6,50 €

Wed, 29 Jul 2026 08:16:43 +0200

Socket Head Cap Shouldered M4x24

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Flat Head Socket Cap M3x8 (5pcs) # HC134-S 5,50 €

Tue, 14 Jul 2026 13:04:47 +0200

5x Flat Head Socket Cap M3x8

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Flat Head Socket Cap M3x5 (5 pcs) # HC132-S 5,50 €

Sat, 18 Jul 2026 20:33:36 +0200

DIN 12.9 Flat Head Socket Cap M3x5 x 5pcs

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M2,5x8 (8pcs) # HC020-S 5,50 €

Fri, 19 Jun 2026 09:24:15 +0200

8x Socket Head Cap M2,5x8

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M3x10 # HC056-S 5,50 €

Wed, 15 Jul 2026 09:06:50 +0200

Socket Head Cap M3x10

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin Socket Head Cap M3x6 # HC044-S 5,50 €

Fri, 17 Jul 2026 10:00:59 +0200

Socket Head Cap M3x6

Spare part suitable for:
SAB Heli Devision Goblin

SAB Goblin SOCKET HEAD CAP M3X18 SHOULD # HC079-S 6,50 €

Wed, 08 Jul 2026 18:49:37 +0200

SOCKET HEAD CAP M3X18 SHOULD

Inludes:

- DIN 12.9 Shoulder Socket Head Cap Screw M3 x 18 x 2pcs

- Metric hex locknut Nuts M3 H4 x 2pcs

Spare part suitable for:
SAB Heli Devision Goblin