Live-Hobby.de/SAB Goblin 770 products

XLPower High-Performance Thrust Bearing Grease for RC Helicopter # XLAC-01 5,29 €

Sun, 26 Jul 2026 17:25:19 +0200

High-Performance Thrust Bearing Grease for RC Helicopter

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Mon, 15 Jun 2026 12:08:22 +0200

Mikado Power Backup 50F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 50F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

HOBBYWING Platinum Pro 180A HV ESC V5 6-14s BEC 10A # HW30209103 294,90 €

Sat, 25 Jul 2026 15:50:11 +0200

Hobbywing Platinum Pro 180A HV ESC V5 5-14s, 10 A BEC

The Platinum V5 180A HV V5 is an extremely powerful ESC with 5-12V switch BEC suitable for 550-700 helicopters and fixed-wing. This is ensured by the built-in 32-bit processor in combination with a specially developed algorithm for RPM accuracy, which clearly sets the performance of the controller apart from similar controllers on the market. In addition to the algorithm, the Platinum V5 with 180A is equipped with various protocols that allow different transmitter systems to read the data from the ESC. These include, for example, the Mikado VBar system and Futaba S.BUS2.

The modern advantages that the Platinum V5 brings with it are also evident in the structural design, such as the many protective functions to make the next flight as safe as possible. This includes protection against overheating of the actual controller but also the attached capacitors. To prevent too much heat from being generated in the first place and this protection having to be activated, the controller has a double-sided heat sink with side ventilation. This allows air to flow quickly through the inside of the ESC and cool it down efficiently. If that is no longer enough, the various protective functions take effect and prevent greater damage.

Features:

Efficient cooling through cooling chamber design
Built-in 12V switch BEC (5-12V)
Supports multiple data protocols e.g. Mikado VBar System, Futaba S.BUS2, etc.
Including data recording, accessible on the smartphone thanks to Bluetooth
Multiple protection functions (e.g. against reverse currents)
16 adjustable parameters including 4 flight modes:
- Fixed wing
- Helicopter - External Governor
- Helicopter - Eleven Governor
- Helicopter - Store Governor

Technical Specifications:

Type:	Brushless High Voltage
Current (cont./peak):	180A/260A
Cells:	6-14S LiPo
BEC:	5-12V @10A (Switch Mode)
Cable battery/motor:	1x 10AWG (red, black) 3x 10AWG (black)
Programming:	- LCD Programming Box - OTA Program Module
Firmware Upgrade:	Yes
Telemetry:	Mikado VBar; Futaba S.Bus2; etc.
Dimensions:	100.6 x 45.5 x 26.1mm
Weight (incl. cables):	250.6g
Application:	550-700 electric helicopters and fixed-wing

Delivery:
1x ESC Platinum V5 180A HV SBEC
1x Manual

MS Composit Carbon Tail Blades 115mm /5/3-FC # MS-R70115-FC 30,90 €

Mon, 27 Jul 2026 11:00:56 +0200

CFC Tail Blades 115 mm/5/3

MS Composit manufactures a broad line of carbon composite tail rotor blades. The tail rotor blades manufacturing technology is derived from the main rotor blades, and ensures high blade performance in all situations. All MS Composits tail rotor blades are dynamically balanced and tested for overload. The security factor (blade dynamic overload) is 2.1 for all types of tail blades.

Technical specifications:
Length: 115 mm
Width: 29mm
Blade type: Standard
Root: 5 mm
Bolt: 3 mm
Profile: Symm
Weight: 7,5 g

Suitable for:
T-REX 800 / Goblin 700 - 770

SUNNYSKY Brushless Motor Racing 4535 - 510KV / 38mm shaft 489,90 €

Wed, 11 Mar 2026 00:16:21 +0100

Technical details:

Part number:	C1000206
Model:	M4535 KV510 Y-S
rpm/V:	510KV
Stator / Poles:	12N / 10P
Stator Diameter / Thickness:	Ø45,5mm / 35mm
Motor Wind:	3+4 Delta thick wire
Motor Resistance:	9,4mΩ
Max Current:	135A
Max Peak Current:	220A
Max Continuous Power:	6500W
Max Peak Power:	10560W
Motor Diameter:	Ø56.3mm x 62mm
Shaft Diameter:	Ø6 x 38mm
Mounting Hole and Screws:	4 x Ø30mm M4
Max Lipo Cell:	12S
Motor Weight:	592g

SUNNYSKY Brushless Motor Racing 4530 - 518KV / 38mm shaft 419,90 €

Sat, 25 Jul 2026 15:50:11 +0200

Technical details:

Part number:	C1000202
Model:	M4530 KV518 Y-S
rpm/V:	518KV
Stator / Poles:	12N / 10P
Stator Diameter / Thickness:	Ø45,5mm / 30mm
Motor Wind:	4+4 Delta thick wire
Motor Resistance:	8,5mΩ
Max Current:	125A
Max Peak Current:	200A
Max Continuous Power:	6000W
Max Peak Power:	9600W
Motor Diameter:	Ø56.3mm x 57mm
Shaft Diameter:	Ø6 x 38mm
Mounting Hole and Screws:	4 x Ø30mm M4
Max Lipo Cell:	12S
Motor Weight:	543g

SUNNYSKY Brushless Motor Racing 4526 - 540KV / 36mm shaft 329,90 €

Fri, 27 Mar 2026 13:40:47 +0100

Technical details:

Part number:	C1000194
Model:	M4526 KV540 Y-S
rpm/V:	540KV
Stator / Poles:	12N / 10P
Stator Diameter / Thickness:	Ø45,5mm / 26mm
Motor Wind:	5+4 Delta thick wire
Motor Resistance:	9,8mΩ
Max Current:	110A
Max Peak Current:	170A
Max Continuous Power:	5200W
Max Peak Power:	8000W
Motor Diameter:	Ø56.3mm x 52mm
Shaft Diameter:	Ø6 x 36mm
Mounting Hole and Screws:	4 x Ø30mm M4
Max Lipo Cell:	12S
Motor Weight:	485g

SUNNYSKY Brushless Motor Racing 4526 - 525KV / 36mm shaft 329,90 €

Mon, 30 Mar 2026 13:01:05 +0200

Technical details:

Part number:	C1000190
Model:	M4526 KV525 Y-S
rpm/V:	525KV
Stator / Poles:	12N / 10P
Stator Diameter / Thickness:	Ø45,5mm / 26mm
Motor Wind:	5+4 Delta thik wire
Motor Resistance:	9,6mΩ
Max Current:	110A
Max Peak Current:	170A
Max Continuous Power:	5200W
Max Peak Power:	8000W
Motor Diameter:	Ø56.3mm x 52mm
Shaft Diameter:	Ø6 x 36mm
Mounting Hole and Screws:	4 x Ø30mm M4
Max Lipo Cell:	12S
Motor Weight:	488g

SAB Goblin Multi Purpose Grease # HA096-S 12,00 €

Fri, 24 Jul 2026 14:44:39 +0200

Multi Purpose Grease

Includes:

- 30ml Multi Purpose Grease

Description:

- Particularly suitable for rolling bearings and linear movements

- Reduce the friction and protect by tribocorrosion

Use for:

- Perfect for Main Shaft, Tail shaft and all kind of Bearings

NEXSPOR CLS4011T Coreless HV Digital Servo (Tail) 49,90 €

Sat, 25 Jul 2026 03:26:57 +0200

CLS4011T tail servo for helicopter of the 500 – 800 class

The new Nexspor 40mm Coreless servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.
The servos are characterized by high speed, positioning accuracy and a lot of power.

The case of the servo is designed to fit in the most popular helicopters. Example for Goblin helicopter you don´t need any require additional shims.
We tested it at OXY 5, Goblin 570-770, Align T-Rex 550-700, Mikado Logo 550-700, Gaui X5-X7, XLPower Specter 700 and Protos 700-800.

Feature:

- Extremely fast tail servo
- High quality Coreless motor
- High quality potentiometer
- High metal gear
- High resolution
- Full CNC aluminium case
- Dual ball bearings
- Ideal for 500 - 800 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,06 sec/60°
Speed at (7,4V)	0,04 sec/60°
Speed at (8,4V)	0,03 sec/60°
Torque at (6,0V)	8,0 kg/cm
Torque at (7,4V)	10,0 kg/cm
Torque at (8,4V)	11,3 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx etc..)
Dimensions (mm)	40x20x40,9
Weight	71g
Connecting wire	JR320mm

Accessories:

1x Servo CLS4011T
5x Servo horn
2x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

AS150 7mm Connector system 5x set for Battery 17,90 €

Wed, 29 Jul 2026 11:20:29 +0200

AS150 7mm connector set on battery side

Content:

5x 7mm plug and housing black (battery side)
5x 7mm socket and housing red (battery side)

AS150 7mm Connector system 5x set for ESC 17,90 €

Thu, 23 Jul 2026 08:14:11 +0200

AS150 7mm connector set on ESC side

Content:

5x 7mm plug and housing red without anti spark(ESC side)
5x 7mm socket and housing black (ESC side)

1st Tail Blades CFK 115mm (orange) # 1stB115-O 29,90 €

Thu, 09 Jul 2026 23:05:05 +0200

Tail Blades CFK 115mm

Technical specifications:
blade length: 115mm
blade admission: 5mm
borehole: 3mm
weight per blade: approx. 6.7g
blade width / depth: 32mm
number of blade: 2

AS150 7mm Connector system with anti spark 5x Set 38,90 €

Tue, 28 Jul 2026 21:42:46 +0200

The AS150 connector system is designed with 7mm Ø for a load capacity of 150A permanently and 200A temporarily and thus covers a wide range of applications.

The plug on the ESC side is equipped with an integrated anti-flash and prevents sparking when the flight battery is connected.

They can be used for one battery as well as for batteries connected in series without the need for an adapter.

The plastic housings of the AS150 connector system are screwed onto the plugs and sockets, which makes them easy to install and reuse.

The AS150 connector system is recommended for models from the 500 size upwards.

Content:
5x 7mm plug with anti-flash and housing red (ESC on the side)
5x 7mm socket and housing black (ESC side)
5x 7mm plug and housing black (battery side)
5x 7mm socket and housing red (battery side)

1st Tail Blades CFK 115mm # 1stB115 25,90 €

Thu, 09 Jul 2026 23:05:05 +0200

Tail Blades CFK 115mm

Technical specifications:
blade length: 115mm
blade admission: 5mm
borehole: 3mm
weight per blade: approx. 6.7g
blade width / depth: 32mm
number of blade: 2

SAB Goblin Pit Mat 680 x 860mm # HA073-S 11,00 €

Tue, 14 Jul 2026 14:11:14 +0200

Pit Mat 680 x 860mm

Includes:
1 x Pit Mat 680 x 860mm

Spare part suitable for:
SAB Goblin

SAB Goblin Grease LDS 30ml # HA075-S 11,00 €

Wed, 29 Jul 2026 08:16:43 +0200

Includes:

- 30ml Grease LDS

Use for:

- All kinds of Radial Bearings and Thrust Bearings

SAB Goblin Grease NBU 50ml # HA075-S 11,00 €

Mon, 27 Jul 2026 18:33:14 +0200

Includes:

- 50ml Grease NBU

Use for:

- Goblin Kraken transmittion group

SAB Goblin Retaining Compound High Strength Bonding 10ml # HA115-S 11,00 €

Fri, 24 Jul 2026 11:31:46 +0200

Retaining Compound High Strength Bonding

It is essential to use the proper RETAINING COMPOIND.

After a long selection process, here the perfect solution: Effective, Consistent, Ergonomics of application, Visibility of the remaining amount...

You have to try it!

Includes:

- Retaining Compound High Strength Bonding x 1 bottle 10ml

SAB Goblin Thread Locker Medium Strength 10ml # HA116-S 9,00 €

Sun, 19 Jul 2026 21:54:06 +0200

Thread Locker Medium Strength

It is essential to use the correct Threadlocker.

After a long selection process, here the perfect solution: Effective, Consistent, Ergonomics of application, Visibility of the remaining amount You have to try it!

Includes:

- Thread Locker Medium Strength x 1 bottle 10ml