Live-Hobby.de/Manufacturer/Ru0026G products

Epoxy Resin L + Hardener L (40 min) 280g # 1001151 14,90 €

Sat, 16 May 2026 18:55:16 +0200

Epoxy Resin L and Hardener L

The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA

Processing time: 40 minutes (100 g / 20 °C)

Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener

It exhibits a very good price/performance ratio and is suitable for the following processing procedures:

Hand laminating
Vacuum moulding
Press moulding

Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.

Mechanical properties (Neat resin after curing)

Flexural test

Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa

Tensile test

Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %

Compression test

Compressive strength (DIN EN ISO 1426): 91 MPa

General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, carbon and natural fibres
High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

200 g Resin L + 80 g Hardener L

Mixing cups of plastic (25ml) / 10 PCS # 9802402-10 2,90 €

Sun, 14 Jun 2026 09:40:13 +0200

Multi-usable plastic mixing vessels. Very suitable for mixing of resins and coatings.

Made of polypropylene (PP), therefore reusable and solvent resistant.

Size

25 ml

Made of polycarbonate and therfore not reusable and not solvent-resistant (but suitable for mixing epoxy adhesives).

5 Minute Epoxy, kits (MR 1:1) / 100g # 1551000 13,90 €

Wed, 15 Jul 2026 20:24:01 +0200

Fast-setting, solvent- and filler-free two-component epoxy resin adhesive

Mixing ratio: 1 : 1 parts by weight / volume of resin to hardener
Processing time: 5 minutes
Loads can be applied to the bond after only 10 minutes

Good bond strength
Tough-hard formulation
Grindable

Fast-setting, solvent- and filler-free two-component epoxy resin adhesive of honey-like viscosity ideal for wood, metal, stone, rigid foams and many plastics.

Shear strength according to DIN 53281, Aluminium (AlCuMg1)9.3 MPa

kit = 50 g resin + 50 g hardener + spatula + mixing cup

Laminating brushes (10mm) / 5 PCS # 3251201 6,90 €

Fri, 10 Jul 2026 21:36:53 +0200

Bristle brushes for applying overlays and laminating resins and for dabbing laminates, bristles' binder material resistant to solvents, unvarnished handle

10mm
5 PCS

5 Minute Epoxy, kits (MR 1:1) / 200g # 1551001 16,90 €

Thu, 28 May 2026 19:40:44 +0200

Fast-setting, solvent- and filler-free two-component epoxy resin adhesive

Mixing ratio: 1 : 1 parts by weight / volume of resin to hardener
Processing time: 5 minutes
Loads can be applied to the bond after only 10 minutes

Good bond strength
Tough-hard formulation
Grindable

Fast-setting, solvent- and filler-free two-component epoxy resin adhesive of honey-like viscosity ideal for wood, metal, stone, rigid foams and many plastics.

Shear strength according to DIN 53281, Aluminium (AlCuMg1)9.3 MPa

kit = 100 g resin + 100 g hardener + spatula + mixing cup + processing instructions

Digital precision scale up to 600 g # 390301-00 17,90 €

Wed, 08 Apr 2026 21:55:33 +0200

This digital pocket scale weighs up to 600 g in 0.1 g increments and yields precise results owing to their high-quality measuring technology. The blue illumination makes the display easy legible at all times. The protective cover is an effective transport guard.

Technical data:

Max. 600 g in 0.1 g increments
Easily legible display with blue illumination
Fast measurement and automatic power off (60 seconds after the last motion)
Self-calibration
Simple operation with three buttons
Toggle for grams, ounces, grains, and carats
Dosing/tare
Robust 125 x 75 x 20 mm housing of black plastic
Weight: 122 g
Stainless steel weighing surface
Delivery includes 2 x AAA batteries