Live-Hobby.de/Accessories/RC Electronics/Transmitter & Receiver/Receiver products

Mikado VLink S.BUS Telemetry Receiver for Micro Helis # 05680 69,00 €

Thu, 09 Jul 2026 11:57:57 +0200

small, lightweight S.BUS compatible receiver, weighs only 4.2 g

allows operation of micro helis with VBar Control

full telemetry-support with OMPHOBBY OFS3 (e.g. M1/M2V3)

antenna diversity

VBasic/RX Only-Firmware, fully functional

online updatable

Indoor Receiver for use on small models like micro helis, park flyers, typically not a full range receiver

Product data:

Dimensions:	32 x 18 x 5 mm
Weight:	4,2 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- Mikado VLink S.BUS Telemetry Receiver
- Printed Manual (Quick-Start-Guide)

Spirit μRX micro Receiver 71,90 €

Wed, 17 Jun 2026 12:55:38 +0200

Spirit μRX is brand new Receiver for R/C aircrafts featuring top-notch technology with a compact form factor.

It can be connected to any model, including all Spirit units offering full Integration with Wave Ecosystem.

Receiver

Spirit Wave 2.4Ghz full-range telemetry receiver
Full featured 30+ channels available
Blazing fast 333 Hz transmission
High interference immunity
BEC Voltage measurement

Features

Gold plated PCB with Pb-Free soldering
JST-GH Connector
1x Auxiliary Telemetry wire
Reverse Polarity Protection
2x 20cm Full-range, replaceable antennas
Max. RF power: 27 dBm, 500mW
Receiver sensitivity: -106 dBm
Suitable for all Spirit units
Full Integration with Spirit Wave + Spirit units
Support for Spirit RX, PWM, S-BUS, SRXL protocols
Easily Updateable
Suitable for all model classes

Specifications

Dimension: 22.4x26x7mm, weight: 5g
Power supply: 3 - 15V
Operating temperature: -10°C to 50°C

Compatibility

Spirit 1
Spirit Pro
Spirit Aero
Spirit 2
Spirit 3
Spirit RS
Spirit GT
Spirit GTR
Spirit W1 (as Backup)
Third-party FBL controllers
Flybar Helicopters
Planes
Copters
Boats
Cars

Package Content

Spirit μRX
20cm Cable

Spirit RX7 Receiver 109,90 €

Wed, 01 Jul 2026 06:49:24 +0200

Spirit RX7 is brand new Receiver for R/C aircrafts featuring top-notch technology in one extraordinary packageǃ

It can be connected to any model, including all Spirit units offering full Integration with Wave Ecosystem.

Receiver

Spirit Wave 2.4Ghz full-range telemetry receiver
Full featured 30+ channels available
Blazing fast 333 Hz transmission
High interference immunity
BEC Voltage measurement

Features

Gold plated PCB with Pb-Free soldering
Gold plated Pin Headers
7x Servo Outputs
Reverse Polarity Protection
2x 20cm Full-range antennas
Max. output power: 30 dBm
Receiver sensitivity: -106 dBm
Suitable for all Spirit units
Full Integration with Spirit Wave + Spirit units
Support for Spirit RX, PWM, S-BUS, SRXL protocols
Easily Updateable

Specifications

Material: ABS Chasis
Dimension: 39.4x25.6x10.7mm, weight: 11g
Power supply: 3 - 15V
Operating temperature: -10°C to 50°C

Compatibility

Spirit 1
Spirit Pro
Spirit Aero
Spirit 2
Spirit RS
Spirit GT
Spirit GTR
Spirit W1 (as Backup)
Third-party FBL controllers
Flybar Helicopters
Planes
Copters
Boats
Cars

Package Content

Spirit RX7
Bind Plug

Jeti Receiver Duplex 2.4EX R7 nano Plug and Play Microheli 84,90 €

Wed, 22 Jul 2026 12:28:02 +0200

Jeti Receiver Duplex 2.4EX R7 nano Plug and Play mounted for Microhelis.

The SBUS output with micro SBUS plug is already activated.

Suitable for e.g.: OMPHOBBY M1, M2 / SKYGOO S2 etc..

Graupner Receiver GR-12L Plug and Play Microheli # S1045SBUS 75,90 €

Sat, 25 Jul 2026 22:16:02 +0200

Graupner Receiver GR-12L Plug and Play mounted for Microhelis.

The SBUS output with micro SBUS plug is already activated.

Suitable for e.g.: OMPHOBBY M1, M2 / SKYGOO S2 etc..

Description GL-12L in general:

The GR-12L receiver can control 12 or 16 channels

With the Graupner HoTT 2.4 GHz technology used, the Graupner GR-12L receiver features state-of-the-art components and software.

Antenna diversity.

The HoTT technology uses up to 75 channels. This ensures extreme operational reliability and insensitivity to external interference.

Receiver voltage, temperature and signal strength are transmitted without additional sensors. Failsafe and Hold are programmable. The input sensitivity of the receiver and thus the range could be significantly increased.

The small and extremely light receiver is used with SUMD, SBUS or SP2048 on Copter Flight Controls or Flybarless systems.

The RSSI value can be output with SUMD, SBUS or SP2048 on channel 8, 12 or 16.

3 additional solder terminals for K2-4 for servo pulse output or level output (0V or 3.3V max. 4mA) for switching LEDs or transistors.

The GR-12L receiver has a wide voltage range from 3.6 V - 8.4 V (operable up to 2.5 V) for high reliability, even with voltage fluctuations.

A red LED clearly indicates the operating status of the HoTT receiver at all times.

In our Graupner online shop you will find the right accessories and spare parts for model making - the right remote controls, chargers, servos, NiMH and LiPo batteries.

Hole spacing 20 mm x 20 mm. Hole diameter 3 mm.

The sides can be easily removed so that the receiver has the dimensions 25 mm x 15 mm x 4 mm.

Product Features

The use of up to 75 channels ensures extreme operational reliability and is insensitive to external interference.
Wide receiver voltage range from 3.6 V - 8.4 V (functional up to 2.5 V)
The red LED indicates the operating status
The size and the weight could be reduced
The receiver input sensitivity and thus the range has been further increased.
Failsafe, Hold programmable

Functions

telemetry connection
SUMD signal for 8 channels for Copter Flight Controls (e.g. Betaflight and Raceflight) and Flybarless systems (e.g. for V-Stabi, Microbeast)
Technical data
Width [mm]: 25 (15) mm
Height [mm]: 4 mm
Temperature range [°C]: -15...+70 °C
Antenna length [mm]: 2x wire 145 (antenna 30) mm
Total weight [g]: 4 g
frequency: 2400...2483.5 MHz
Range approx. [m]: ~3000 m
Length [mm]: 25 mm
Dimensions [LxWxH in mm]: 25 x 25 (15) x 4 mm
Modulation: 2.4 GHz FHSS
Current consumption [mA]: 70 mA
Operating voltage [V]: 4...10 V
Gyro: No
Channels: 8 / 12 / 16
Telemetry capable: Yes
Number of antennas: 2

Specification:

Width [mm]: 25 (15) mm
Height [mm]: 4 mm
Temperature range [°C] : -15...+70 °C
Aerial length [mm]: 2 x Wire 145 (Antenna 30) mm
All-up weight [g]: 4 g
Frequency : 2400...2483.5 MHz
Range approx. [m] : ~3000 m
Overall length [mm]: 25 mm
Dimensions [LxWxH in mm]: 25 x 25 (15) x 4 mm
Modulation: 2.4 GHz FHSS
Current consumption [mA]: 70 mA
Operating voltage neutral [V] : 4...10 V
Channels: 8 / 12 / 16
Telemetry capable: Yes
Number of antennas: 2

Mikado VStabi EVO VLink 7.x Express Alu-case orange # 05571 279,00 €

Wed, 11 Mar 2026 00:16:36 +0100

VBar EVO Highlights

New processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest available computing power on the market to this date
Innovative step-up/step-down voltage supply from 2 V up to 16 V at full power with high efficiency (less excess heat)
Full telemetry and range down to 2 V supply voltage
Improved high frequency technology for high power and sensitivity
Double sensor system using tried and tested technology and new sensors

The hardware allows for new specs:
Frame rates adjustable up to 1 kHz (1 ms) on the swash plate and 0.5 ms on the tail
ESC frame rate up to 1 KHz
Pulse width selecable between 1.5 ms down to 125 µS as well as digital high speed protocols
Improved algorithms: adjusted tot he new frame rates, new optimized digital filtering
Dynamic swash plate rotation (per bank)
New „Tail Torque Extension“ for motor driven tails, more control when the tail rotor is unloaded

Mikado VStabi EVO VLink 7.x Express neon-yellow # 05582 279,00 €

Thu, 30 Jul 2026 03:19:17 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case purple # 05570 279,00 €

Sun, 26 Jul 2026 17:12:12 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case brown # 05573 279,00 €

Wed, 11 Mar 2026 00:16:35 +0100

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case black # 05568 279,00 €

Sun, 12 Jul 2026 23:16:52 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case gold # 05574 279,00 €

Mon, 27 Jul 2026 18:59:38 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case grey # 05567 279,00 €

Thu, 09 Jul 2026 11:58:04 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case green # 05569 279,00 €

Sun, 26 Jul 2026 15:22:10 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case red # 05572 279,00 €

Thu, 30 Jul 2026 08:41:27 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case blue # 05566 279,00 €

Thu, 25 Jun 2026 11:40:45 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express white # 05581 279,00 €

Mon, 30 Mar 2026 08:04:57 +0200

VBar EVO Highlights

Flysky SRM ANT Receiver mini sBUS 23,90 €

Wed, 11 Mar 2026 00:15:59 +0100

Description Flysky SRM ANT receiver mini sBUS:

The SRM receiver is the ideal partner when using a Flysky remote control and is specially designed for the installation and output of PWM signals. Therefore it is supported by all ANT-capable transmitters.

Technical Specifications

PWM-Channels:	1
RF:	2.4GHz ISM
Protocol:	ANT
Antennas:	Dual
Input Voltage:	3.5-9V
Range:	>1000m (air)
Output:	PWM/PPM/i-BUS/S.BUS
Resolution:	4096
Temperature:	-10°C to +60°C
Max. Humidity:	20%-95%
Update:	Ja
Dimensions:	19x12.1x3mm
Weight:	1.1g
Compatible Transmitter:	all ANT-Transmitter

Flysky SR8 ANT Receiver 29,90 €

Thu, 18 Jun 2026 03:49:53 +0200

Product information Flysky SR8 ANT Receiver

The SR8 receiver is the ideal support when using a Flysky remote control and is also specially designed for the installation and output of PWM/PPM/i-BUS and S.BUS signals. All ANT-capable transmitters are supported.

Technical Specifications

PWM-Channels:	8
RF:	2.4GHz
Protocol:	ANT
Antennas:	Dual
Input Voltage:	3.5-9V
Range:	>1000m (Air)
Output:	PWM, PPM, i-BUS, S.BUS
RSSI:	Supported
BVD:	Yes, 0-70V
Temperature:	-10°C to +60°C
Max. Humidity:	20%-95%
Update:	Yes, online
Dimensions:	44.8x26.6x11.3mm
Weight:	10g
Compatible Transmitter:	all ANT-Transmitter

Graupner Hawk 12 HoTT receiver with 3-axis gyro and Vario (6-channel) # S1052 179,90 €

Sun, 24 May 2026 08:11:32 +0200

Description "GRAUPNER Hawk 12 HoTT receiver with 3-axis gyro and Vario (6-channel)"

With the Hawk 12, Graupner presents a powerful 6-channel receiver with integrated 3-axis gyro and particularly vibration-insensitive 3-axis acceleration sensor, diversity antennas, vario and attitude mode for fixed-wing models or rescue mode and attitude mode for helicopters.

With GRAUPNER HoTT 2.4GHz technology, the receiver has a secure hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. The receiver transmits the parameters "receiver voltage", "receiver temperature", "signal strength", "altitude", "altitude difference (vario)" to the transmitter without additional sensors. It is also possible to transmit the Euler angles to the transmitter and display them there.

The antenna amplifier together with the antenna diversity ensures an enormous range. The faster 32-bit L4 processor guarantees energy-saving operation and the higher performance ensures that the Hawk 12 can also be used as a flybarless system for helicopters and as a flight controller for copters. Of course, the integrated Hawk gyro system can also be used perfectly for fixed-wing models. There are 4 different gyro modes: OFF, normal stabilization, heading lock, gyro rate mode and attitude mode. When set correctly, the gyro rate mode enables knife-edge flight and torquing without control corrections. Extremely quick, easy and convenient to set via the Hott transmitter telemetry menu.

Just like its namesake, the falcon, the Hawk 12 embodies determination, power and precision. Go on the hunt for the perfect flight with the Hawk.

Wing models

* Stabilization of the flight model in difficult wind conditions for up to 3 axes
* Natural flight behavior due to proportional gyro suppression
* The 3-axis gyro means that even difficult-to-control aerobatic models can be flown very smoothly and aerobatics are extremely simplified
* Flight figures can be flown much more cleanly
* 4 different gyro modes: OFF, normal stabilization, heading lock, turn rate mode for particularly easy knife-edge flight and simple torquing as well as attitude mode
* Simple setting of the gyro assignment
* Parameter setting via HoTT telemetry
* Software with attitude mode enables easy landings even in difficult wind conditions
* 5 free mixers
* SUMD output for connection to flybarless systems, flight controllers or a power box.
* SUMDIN input for redundant receiver operation.

Flybarless system for helicopters

* Rescue mode and attitude mode for helicopters
* Basic setting completed in just a few minutes via HoTT telemetry
* Fast and innovative axis assignment for flexible installation direction
* Extremely space-saving due to size, weight and elimination of cables, making it easy to store
* Special vibration-resistant 3-axis sensors of the latest generation
* Swashplate pirouette optimization and direction of tail torque compensation are detected automatically
* All common heli swashplates 90/120/135/140 degrees and 90 degrees 4 servos
* Adjustable swashplate rotation up to 90 degrees for multi-blade heads
* Clear standard menu and selectable expert menu if required
* Sensitivity parameters can also be adjusted during flight to speed and style depending on flight phase via encoder
* Super-fast due to elimination of transmission time from receiver to flybarless system
* Very direct control feel

Programming for helicopters

* Simple programming of the basic settings via telemetry.
* Pirouette optimization is determined automatically from the parameters and works extremely well.
* Extreme flight stability with full 3D capability even with the basic settings.
* The effect for the tail and swashplate can be easily set via the telemetry menu or via selectable encoders.
* Further optimization options in expert mode for personal flying style and personal requirements.
* Extremely simple adjustment of the basic settings via telemetry:
* Rotor rotation direction
* Swashplate type
* Swashplate frequency 50...200 Hz
* Swashplate direction
* Swashplate servo centers Servo 1...3 (4)
* Set swashplate cycl. travel to 8°
* Swashplate pitch travel A/B
* Swashplate limit
* Swashplate rotation
* Tail servo center pulse 760µs, 960µs, 1.5 ms
* Tail servo frequency 50...333 Hz
* Tail servo center position
* Rescue pitch
* Expo yes/no
* Logging for service purposes or for the Euler angle display
* Expert mode yes/no
* Simple gyro axis assignment
* Gyro effect for tail and swashplate via telemetry or adjustable encoders.
* Additional parameters can be set in expert mode.

Flight control for copters

* Copter software Q07 with Dshot controller protocol can be loaded via software update
* Basic setup completed in just a few minutes via the telemetry menu
* Fast and innovative axis assignment for flexible installation direction
* Special vibration-resistant 3-axis sensors of the latest generation
* The housing protects the electronics in the event of a crash. The special double-sided adhesive tape additionally dampens vibrations.
* 8kHz gyro frequency, multishot and fast PID control routines as well as new software filters ensure a perfect flying experience.
* D-Shot with turtle mode.
* Quadrotype XI (Quadrocopter X with reverse prop rotation direction), which has proven itself especially in FPV races, so that the lens remains clear and the props turn away from the obstacle.
* When the S8437 GPS sensor is connected to K5/Telemetry and K5 is set to SENSOR, the functions are also available: Hold GPS with altitude hold, Come home and Fly waypoints (with HoTT Viewer app and USB OTG cable) are available.
* Telemetry support for own Hott sensors and Hott sensors from other providers
* SUMD output for other flybarless receivers.
* SUMDIN input for redundant receiver operation.
* Voltage input for external voltage divider, e.g. already included in the S3082 and S3083 controllers.
* Suitable for HV. Input voltage range 3.6...8.4 V
* Can be programmed and operated with all previously available HoTT transmitters with telemetry

Technical data

* Channels: 6
* Approx. dimensions: 36 x 22 x 12 mm
* Weight approx.: 10 g
* Frequency: 2400 ... 2483.5 MHz
* Modulation: 2.4 GHz FHSS
* Range: approx. 4000 m
* Power consumption: 70 mA
* Operating voltage: 3.7V to 8.4V
* Antenna length: 2x wire 145 (antenna 30) mm
* Temperature range: -15 to +70°C

Graupner Hawk 18 HoTT receiver with 3-axis gyro and Vario (9-channel) # S1053 199,90 €

Mon, 01 Dec 2025 09:38:48 +0100

GRAUPNER Hawk 18 HoTT receiver with 3-axis gyro and Vario (9-channel)

With the Hawk 18, Graupner presents a powerful 9-channel receiver with integrated 3-axis gyro and particularly vibration-resistant 3-axis acceleration sensor, diversity antennas, vario and attitude mode for fixed-wing models or rescue mode and attitude mode for helicopters.

With GRAUPNER HoTT 2.4 GHz technology, the receiver has a secure hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. The receiver transmits the parameters "receiver voltage", "receiver temperature", "signal strength", "altitude", "altitude difference (vario)" to the transmitter without additional sensors. It is also possible to transmit the Euler angles to the transmitter and display them there.

The antenna amplifier together with the antenna diversity ensures an enormous range. The faster 32-bit L4 processor guarantees energy-saving operation and the higher performance ensures that the Hawk 18 can also be used as a flybarless system for helicopters and as a flight controller for copters. Of course, the integrated Hawk gyro system can also be used perfectly for fixed-wing models. There are 4 different gyro modes: OFF, normal stabilization, heading lock, gyro rate mode and attitude mode. When set correctly, the gyro rate mode enables knife-edge flight and torquing without control corrections. Extremely quick, easy and convenient to set via the Hott transmitter telemetry menu.

Just like its namesake, the falcon, the Hawk 18 embodies determination, power and precision. Go on the hunt for the perfect flight with the Hawk.

Wing models

* Stabilization of the flight model in difficult wind conditions for up to 3 axes
* Natural flight behavior due to proportional gyro fade-out
* The 3-axis gyro means that even difficult-to-handle aerobatic models can be flown very smoothly and aerobatics are extremely simplified*
* Flight figures can be flown much more cleanly
* 4 different gyro modes: OFF, normal stabilization, heading lock, turn rate mode for particularly easy knife-edge flight and simple torquing as well as attitude mode
* Simple setting of the gyro assignment
* Parameter setting via HoTT telemetry
* Software with attitude mode enables easy landings even in difficult wind conditions
* 5 free mixers
* SUMD output for connection to flybarless systems, flight controllers or a power box.
* SUMDIN input for redundant receiver operation.

Flybarless system for helicopters

* Rescue mode and attitude mode for helicopters
* Basic setting completed in a few minutes via HoTT telemetry
* Fast and innovative axis assignment for flexible installation direction
* Extremely space-saving due to size, weight and elimination of cables, making it easy to store
* Special vibration-resistant 3-axis sensors of the latest generation
* Swashplate pirouette optimization and direction of tail torque compensation are detected automatically
* All common heli swashplates 90/120/135/140 degrees and 90 degrees 4 servos
* Adjustable swashplate rotation up to 90 degrees for multi-blade heads
* Clear standard menu and selectable expert menu if required
* Sensitivity parameters can also be adjusted during flight to speed and style depending on flight phase via encoder
* Super-fast due to elimination of transmission time from receiver to flybarless system
* Very direct control feel

Technical data

* Channels: 9
* Approx. dimensions: 46 x 21 x 14 mm
* Weight approx.: 14 g
* Frequency: 2400 ... 2483.5 MHz
* Modulation: 2.4 GHz FHSS
* Range: approx. 4000 m
* Power consumption: 70 mA
* Operating voltage: 3.7V to 8.4V
* Antenna length: 2x wire 145 (antenna 30) mm
* Temperature range: -15 to +70°C