Live-Hobby.de/Sale/Outlet products

Hitec HTS-Volt Voltage Sensor # 110840 4,50 €

Mon, 09 Dec 2024 16:26:41 +0100

This sensor measures voltage up to 100 volts

Specifications

Measurement range: 0 ~ 100v
Measurement Resolution: 0.1v
Wire length: 250mm

Kontronik Brushless Motor PYRO 650-62 # 27315 299,00 €

Wed, 30 Sep 2026 11:32:53 +0200

The PYRO 650 perfectly fits into the PYRO family and is almost as strong as the PYRO 700.

It is the perfect motor for 570 / 600 sized helicopters with 12S.

The PYRO 650 can handle up to 3 kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

PYRO 650 in short:

Neodym magnets, heat resistent up to 150 degree C
Dedicated enameled wire, heat resistent up to 300 degree C
Optimized metal sheets
Optimized ventilation
Radial fan
Optimized magnet circuit

Details:

620 RPM/V
Max. 30,000 RPM
6 mm shaft
10 poles
23.5 mm free shaft length
295 g / 10.4 oz
3 kW
26 mΩ R_i

Spektrum Replacement Servo Mechanics 2,3-Gram 2030L # SPM6836 10,99 €

Wed, 21 Oct 2026 10:01:53 +0200

Horizon Hobby # SPM6836

HITEC - Multiplex Gear Set HS-225 & 5245 # 119021 7,90 €

Wed, 11 Mar 2026 00:15:51 +0100

Ersatzgetriebe für HITEC HS-225 & HS-5245

Zahnrad 1 3Stück

Hitec Servo- Cover- Set HS-65HB/65MG/5065MG # 119018 9,90 €

Wed, 11 Mar 2026 00:15:51 +0100

Ersatzgehäuse für Hitec Servo HS-65HB/65MG/5065MG/5070MG

Servo King DS790 Getriebe # SKDS790gear 14,90 €

Wed, 11 Mar 2026 00:15:53 +0100

Ersatzservogetriebe für folgenden Servo:

Servoking DS790 SHV

BK SERVO Gear Set - DS-7006HV # BKFS07 24,90 €

Wed, 11 Mar 2026 00:16:17 +0100

BK SERVO Gear Set - DS-7006HV

Spektrum Aircraft Telemetry 3-Axis GForce Sensor: 8G # SPMA9585 39,90 €

Thu, 22 Oct 2026 21:43:19 +0200

Aircraft Telemetry 3-Axis GForce Sensor: 8G

Product Description

Key Features

Accurately monitors your model's G-Force
Monitors all 3-axes up to 8G
Threshold alarm

Overview

Now you can accurately measure the G-Force your model is pushing, up to 8Gs on 3-axes.

Multiplex Current Sensor 35A for M-LINK Receiver (M6) # 85403 34,90 €

Wed, 21 Oct 2026 09:42:17 +0200

Measures currents up to 35 A. Fitted with the M6 connector system, the sensor is typically looped in between the battery and the consumer unit in order to measure the current of the electric power system. In future, if you activate the battery charge counter, (using a MULTImate or PC via program "Sensor DataManager”) you can forget using a timer when flying; instead you can fly according to the actual residual charge in the flight battery. The current sensor virtually equates to an electrical fuel gauge. The following can be activated and altered using the MULTImate, or using Sensor Data Manager on the PC:
Address Address (screen line on transmitter) at which the current is displayed
Top alarm Upper current value, above which an alarm is triggered at the transmitter
Bottom alarm Lower current value, below which an alarm is triggered at the transmitter
Option Additional generation of minimum, average or maximum current
Address option Address (screen line on transmitter) at which the optional value is displayed
Address Address (screen line on transmitter) at which the discharged battery capacity or residual capacity is displayed
Battery capacity Capacity of the connected battery
What is to be displayed: battery capacity, discharged capacity or residual capacity Alarm Capacity value at which an alarm is to be triggered

Specification

Max. current:	35 A (two measurement channels)
Resolution:	0.1 A
Dimensions (L x W x H):	33 x 31 x 7 mm
Weight:	approx. 12 g

Multiplex Current Sensor 35A for M-LINK Receiver (whiteout connector) # 85404 36,50 €

Wed, 21 Oct 2026 09:41:31 +0200

No current means: nothing works - so obtaining information about currents in the model is vital! This is where the current sensors are ideal. They actually have two functions:

A - To measure the actual currents flowing, i.e. the motor current, receiver current or ECU battery current (in jets) A useful tool for tasks such as optimising the power system (how much current the motor draws with different propellers) and for avoiding overload situations, e.g. the presence of stall currents when the model’s receiving system is at idle could indicate incorrectly set servo travels.

B - To indicate the residual charge in the battery: virtually the "fuel gauge” for the battery. Knowledge of the residual charge is indispensable, especially when your model is fitted with modern high-performance LiPo batteries (e.g. Li-BATT FX), since the voltage of these packs remains virtually constant for a very long time during the discharge process, but then "collapses” in seconds. This means that monitoring the receiver battery voltage is no longer adequate, and even timers can only offer avery approximate guide.

The current sensor is connected to a telemetry-capable receiver, or to another sensor on the MSB. The sensor is looped into the negative connection between battery and consumer unit; suitable high-current connectors or cables are attached to the solder pads (# 8 5404 / # 8 5405).
The sensor’s basic function "output of actual current flowing in A” can be used immediately, typically to monitor the current drawn by the electric power system.

Once you have activated the charge counter using the MULTImate (# 8 2094) or the "MULTIPLEX Launcher”** PC program, you can forget about relying upon a timer for your flight times; instead you can fly according to the actual residual charge in the flight battery.
Used in this way, the current sensor becomes your electronic fuel gauge!
Protect your valuable batteries from deep-discharging, which can seriously shorten their useful life.

Options which can be activated and adjusted using the MULTImate or the Sensor-DataManager:

Address*
Lower alarm: 0 - 35 or 100 A
Upper alarm: 0 - 35 or 100 A
Option 1 Maximum, minimum or average current
Mincurr/Avcurr: (variable between 0.0 A and 1.0 A),
Minimum current at which the software starts counting in order to calculate the average value.
Note: only applies to the "Average value” option.
Delay time: Power-on delay (variable in the range 0.0 – 3.0 seconds):
Defines the point at which the measurement is to commence after switching on.
Address Option 1*
Option 2 Discharged energy, or residual charge indicator in: mAh
or percent (%) (percent is only useful if you previously entered a battery capacity as reference value).
Battery capacity: Capacity of the connected battery.
Alarm: Residual value at which an alarm is to be triggered.
Address Option 2*
*(off, or an address in the range 0 - 15 (Telemetry-Display), 0 - 14 (ROYAL PRO), or 0 - 7 (Cockpit SX),

Specification

Current:	max. 35 / (150) A
Resolution:	0.1 A
Dimensions L x W x H (excl. cables):
approx. 22.5/31.0 x 25.0 x 6.5 mm
(42,0 x 32,0 x 19,0)
Weight:	5.0 ( 20) g

Mikado VBar Control Radio / LOGO200 Case Faux Leather # 05483 99,00 €

Mon, 05 Oct 2026 20:44:23 +0200

Case Faux Leather for all VBar Control Transmitter and Logo 200

*** helicopter and radio are not included ***

Jeti Alu Case for Jeti DS 14 / 16 / 24 # JMS-DS-AC 69,21 €

Fri, 25 Sep 2026 11:38:44 +0200

Aluminum case for the safe transport and storage of your Jeti DS transmitter.
Also perfect for all accessories, etc.

Compatible with JETI Duplex transmitters DS-12, DS-14, DS-14II, DS-16, DS-16II, and DS-24

Package Contents
1x silver aluminum case for Jeti DS transmitters

Jeti Wind and weather protection for Jeti DC # JMS-DC-WG 112,90 €

Wed, 21 Oct 2026 09:35:26 +0200

Jeti Wind and weather protection for Jeti DC

Jeti Wind and weather protection for Jeti DS # JMS-DS-WG 112,90 €

Wed, 21 Oct 2026 09:34:45 +0200

Jeti Wind and weather protection for Jeti DS

3x THETA RAZOR-DH1 Low-Profile Brushless HV Servo SET with NFC BLUE 309,90 €

Fri, 02 Oct 2026 15:05:07 +0200

THETA RAZOR-DH1 Low-Profile Brushless HV Servo with NFC - blue version

NFC programmable brushless HV servo in the 40 mm low-profile size.
The application range of the servo is versatile from helicopter swashplate servo from the 550 up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.
Due to the SANWA SSR compatibility, the advantages of Sanwa Super Response transmission can be used in the RC car sector.

Specifications:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,090 (secS/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	24 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,092 (sec/60°)
Speed at 6V	0,081 (sec/60°)
Speed at 7,4V	0,072 (sec/60°)
Speed at 8,4V	0,063 (sec/60°)

Torque at 5V	30 (kg/cm)
Torque at 6V	34 (kg/cm)
Torque at 7,4V	37 (kg/cm)
Torque at 8,4V	40 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-DH1 blue
with accessories

OMPHOBBY M7 Canopy gold - defekt # OSHM7002-D1 49,00 €

Tue, 23 Jun 2026 10:38:22 +0200

Canopy gold - Defect see photos

Spare part suitable for:
OMPHOBBY M7

Mikado LOGO 800 XXTREME Motor Scorpion HK 5035-380 # 04590 259,00 €

Thu, 02 Jul 2026 10:38:35 +0200

Motor Scorpion HK 5035-380

Spare part suitable for:
Mikado LOGO 800 XXTREME

SOXOS 800 Canopy # C800 69,90 €

Thu, 05 Dec 2024 16:40:32 +0100

Canopy

Spare part suitable for:
SOXOS 800

soXos Canopy Orange / Blue # C801 69,90 €

Thu, 11 Apr 2024 16:30:38 +0200

Canopy Orange / Blue

Spare part suitable for:
soXos 800

SAB Goblin Main Blades S721 # S721 79,90 €

Wed, 04 Nov 2026 16:04:59 +0100

Main Blades S721

NEW SAB Blades: the silent power!

New aerodynamics, new profiles, new construction philosophy.

The blade produce great power without the need to turn at high rpm. Stable and precise, they are smooth and silent in all maneuvers. This blade is the new standard for SAB!

Technical features:

Length : 721 mm
Width : 50/64 mm
Root : 12 mm
Bolt Hole : 5mm