Live-Hobby.de/Spare Parts/Spare Parts Helicopter/OXY Heli/OXY2 Spare Parts products

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

Ladekabel mit 4mm Banane auf XT30 # ZB-LK-XT30 3,90 €

Mon, 27 Jul 2026 16:30:45 +0200

Ladekabel mit

4mm Goldkontaktstecker für an das Ladegerät auf XT30 Stecker

Charger leads with XT60 to XT30 with 10cm 16AWG # ZB40133 4,90 €

Wed, 29 Jul 2026 11:22:32 +0200

Charger leads with XT60 to XT30 with 10cm 16awg silicone wire

NEXSPOR CLS2306T HV Digital Servo (Tail) # CLS2306T 39,90 €

Tue, 28 Jul 2026 07:03:56 +0200

CLS2306T Micro 23mm Tailservo 250 - 470 class helicopter.

The servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.

The tail servo CLS2306T is extremely fast and at the same time very powerful. The high speed and power of this small servo allow you to have the maximum tail performance of your helicopter.

Feature:

High quality coreless motor
High quality potentiometer
High precision metal gear
High resolution
Full CNC aluminium case
Dual ball bearings
Ideal for 250 - 470 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,06 sec/60°
Speed at (7,4V)	0,05 sec/60°
Speed at (8,4V)	0,04 sec/60°
Torque at (6,0V)	4,2 kg/cm
Torque at (7,4V)	5,2 kg/cm
Torque at (8,4V)	6,0 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Dimensions (mm)	23x12x27,5
Output toothing	25T Ø 5,0mm
Weight	20,3g
Connecting wire	JR220mm

Ideal tail servo for: Align T-REX 250, 450, 470, OXY 2, OXY 3, OXY 4, Goblin Fireball/Comet, Protos 380, and many more....

Accessories:

1x Servo CLS2306T
4x Servo horn
1x Screw M2,3
2x Tapping screw for servo

OXY Heli OXY2 SH CF Main Frame # OSP-1486 34,50 €

Wed, 11 Mar 2026 00:16:00 +0100

OXY Heli CF Main Frame

Spare part suitable for:
OXY2 SH

LYNX HELI INNOVATIONS # OSP-1486

OXY Heli OXY2 SH CF Main Frame # OSP-1487 3,70 €

Wed, 11 Mar 2026 00:16:00 +0100

OXY Heli CF Main Frame

Spare part suitable for:
OXY2 SH

LYNX HELI INNOVATIONS # OSP-1487

Lynx Servo DS-895-HV Alu CNC Case # LX2512 49,90 €

Wed, 11 Mar 2026 00:16:01 +0100

Lynx Servo DS-895-HV Alu CNC Case

Using the Lynx LX9004 - Lynx Servo DS-895-HV, we build a special Cover and Rear Case in order to increase global Servo performance.

After many pilot report and crash we decided to improve the standard Lynx DS-895-HV Servo with precision CNC Servo Cover and Rear Case.

With this Metal Case, servo become more precise and robust in case of crash, gear mesh become very precise and cannot move as can upend on plastic case for wear or crash shock.

The other important feature is the incredible heat-sink effect of CNC Rear Cover. Thanks a special design the motor case is in direct connection with Rear Cover keeping the motor temperature under dangerous values, increasing the global performance and the spam-life.

Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight and features, this Servo Case will increase Servo performance and assure flight precision.

Lynx upgrade design: the new frontier of lightweight and high precision upgrade parts for micro helicopters.

DS-895-HV SERVO FEATURES:

- Direct replacement for the standard 180 CFX cyclic servo.

- Servo Case Material: CNC Aluminum Cover and Rear Case with Techno Polymer Core.

- Full Metal Gear Digital Precision Servo (Brass and Aluminum Alloy)

- Input (V-in): 4.5 to 6 V

- Frequency: 333 Hz

- Neutral Point: 1500μs

- Speed: 0.06 sec / 60° at 4.5V

0.05 sec / 60° at 6 V

- Stall Torque: 1.40 kgcm at 4.5V

1.80 kgcm at 6 V

- Dimension: 20.05 x 8.35 x 19.70 mm

- Connector JST-1.50 (180CFX standard)

- Weight including 150 mm cable connector: 6.50g

- Output Gear support: Radial bearing 4x7 W2

- Servo Arms: 4 type included + LX1097 - Micro Servo Gear Saver Arm preinstalled at zero-degree pitch.

PACKING LIST:

1 x DS-895-HV Aluminum Case Servos # LX2512

Gold Connector with yellow case XT30 (Male) # ZB-ST-XT-30 0,99 €

Wed, 29 Jul 2026 11:27:26 +0200

Goldkontakt Stecker mit Gehäuse XT30 (Male) - Amass

Gold Connector with yellow case XT30 (Female) # ZB-BU-XT-30 0,99 €

Thu, 23 Jul 2026 11:00:04 +0200

Goldkontakt Buchse mit Gehäuse XT30 (Female) - Amass

HOBBYWING Platinum Pro 25A V4 ESC 3-6s BEC 3A # HW30204200 36,90 €

Wed, 11 Mar 2026 00:15:59 +0100

HOBBYWING Platinum Pro 25A V4 ESC 3-6s BEC 3A

With the Platinum 25A V4, Hobbywing sets new standards in the field of controller technology.Excellent control behavior, protection mechanisms and extensive programming and application possibilities characterize this controller. This controller is suitable for Helicopters of the 250 class (Main Blade 200-300mm) as well as for Fixed-Wing models and Multicopter. In spite of the Power of 25A and operation with 3-6S LiPo, it has a compact size and low weight.

Features

New DEO technology
For gentle and linear control. Startup function for
soft start-up and programmable brake functions

Programmable
About Hobbywing WiFi Express module or LCD programming box

Strong BEC
BEC 6 /7,4 V with Cont./Peak 3A / 7A

Governor Function
There are 3 different governor modes available. External Governor,
Store governor and eleven governor

Technical specifications

Solid connection cable: 16AWG
Constant / Peak Current: 25A / 40A
BEC: 6V / 7,4V
BEC Voltage Constant / Peak: 3A / 7A
Application: 250 Helicopter, Fixed Wing model and Multicopter
Lipo cells: 3-6S
Protection functions for: voltage cutoff, overload, signal loss, overheat
Measurements: 47x22x10mm
Weight: 27 g.
Programmable with WiFi Express module or LCD programming box

YGE 35LVT Brushless ESC 35A with Telemetry 2-6S # YGE-35LVT 119,00 €

Tue, 02 Jun 2026 14:36:17 +0200

"T" for Telemetry

Supported telemetry-protocols:

- Graupner HoTT V4
- Jeti ExBUS
- Multiplex Sensor BUS V2
- Mikado Vbar Control
- MSH Brain 2
- Spirit FBL
- YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky)

more protocols coming soon...

All usual informations as current, voltage, capacity, RPM, temperature etc. will be transferred to your transmitter. The amount of data and the characterisation depends on your transmitter/receiver.

Technical Specifications:

- Update capable (optional USB-Adapter available)

- entirely overhauled hard- und software (32-bit)

- the PWM-frequency will be set automatically to the requirements of the motor

- Current-limitation

- 2 to 6S LiPo

- super smooth sinus-startup

- adjustable HV-BEC from 5,5 to 8,4V

- high BEC-current rating: 5A permanent / 10A peak

- dimensions in mm: 34 x 23 x 8

- weight with / without cables: 13g / 25g

- basic settings via mode-setup

- BEC- and Telemetry-settings, as well as additional parameters adjustable via PC-Software (optional USB-adapter available)

suitable for OXY2, T-Rex 250

OXY Heli OXY2 Threaded Rod M1.4x11 , 10Pcs # SP-OXY2-006 7,00 €

Wed, 11 Mar 2026 00:16:01 +0100

OXY Heli Threaded Rod M1.4x11 , 10Pcs

Spare part suitable for:
OXY2

LYNX HELI INNOVATIONS # SP-OXY2-006

OXY Heli OXY2 Helicoidal Pinion 17T, 18T - 2.5mm Motor Shaft # SP-OXY2-138 8,30 €

Wed, 11 Mar 2026 00:16:02 +0100

OXY Heli Helicoidal Pinion 17T, 18T - 2.5mm Motor Shaft

Spare part suitable for:
OXY2

LYNX HELI INNOVATIONS # SP-OXY2-138

OXY Heli OXY2-FE CNC Tail Case # SP-OXY2-035 25,80 €

Wed, 11 Mar 2026 00:16:02 +0100

OXY Heli CNC Tail Case

Spare part suitable for:
OXY2 Factory Edition

LYNX HELI INNOVATIONS # SP-OXY2-035

OXY Heli OXY2 Tail Grip Only Plastic, 4Pcs # SP-OXY2-126 14,20 €

Wed, 11 Mar 2026 00:16:02 +0100

OXY Heli Tail Grip Only Plastic, 4Pcs

Spare part suitable for:
OXY2 / OXY2 190 Sport

LYNX HELI INNOVATIONS # SP-OXY2-126

OXY Heli OXY2 CNC Canopy Mount # SP-OXY2-021 5,20 €

Wed, 11 Mar 2026 00:16:00 +0100

OXY Heli CNC Canopy Mount

Spare part suitable for:
OXY2

LYNX HELI INNOVATIONS # SP-OXY2-021

OXY Heli OXY2 CF Break Away Canopy # SP-OXY2-020 3,70 €

Wed, 11 Mar 2026 00:16:00 +0100

OXY Heli CF Break Away Canopy

Spare part suitable for:
OXY2

LYNX HELI INNOVATIONS # SP-OXY2-020

OXY Heli OXY2 Vertical Fin Sticker green # SP-OXY2-062 0,80 €

Wed, 11 Mar 2026 00:16:02 +0100

OXY Heli Vertical Fin Sticker green

Spare part suitable for:
OXY2

LYNX HELI INNOVATIONS # SP-OXY2-062

OXY Heli OXY2 Threaded Rod M1.4x7 , 10Pcs # SP-OXY2-130 6,80 €

Tue, 31 Mar 2026 20:59:43 +0200

OXY Heli Threaded Rod M1.4x7 , 10Pcs

Spare part suitable for:
OXY2 / OXY2 190 Sport

LYNX HELI INNOVATIONS # SP-OXY2-130

OXY Heli OXY2 Boom Mount Lock Rod # SP-OXY2-027 4,90 €

Wed, 11 Mar 2026 00:16:00 +0100

OXY Heli Boom Mount Lock Rod

Spare part suitable for:
OXY2

LYNX HELI INNOVATIONS # SP-OXY2-027