Live-Hobby.de/Spare Parts/Spare Parts Helicopter/OXY Heli/OXY FLASH Spare Parts products

YGE Aureus 185 Brushless ESC 185A with BEC # YGE-Aureus-185 569,00 €

Mon, 22 Jun 2026 20:47:32 +0200

Technical data:

6 - 12S Lipo
Current 185A, 270A chest
BEC 5.5V - 12V
BEC 10A continuous, 25A peak
"T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, and the proprietary YGE protocol for additional telemetry connections via, for example, YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2, and Spirit FBL.
Updateable (optional USB adapter available)
completely revised hardware and software (32-bit)
the PWM frequency is automatically adjusted to the needs of the motor
The specified current is the maximum continuous full throttle current with good cooling
Reverse regulation or shutdown in case of undervoltage
Current limiting
Undervoltage detection can be switched off
Speed control (Governor mode)
Soft start (sine or block commutation)
Super slow soft start for scale helicopters possible (60sec.)
Active freewheel, therefore unlimited partial load resistance
Automatic timing, or adjustable in 6 levels
EMK brake adjustable
F3A / Acro brake (brake force continuously adjustable in flight)
Min. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. power)
Speed limit: 240,000 rpm (2-pole)
Overtemperature / overload warning
Anti-flash: Reduces the switch-on spark
Basic programming via mode setup
Fine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available
Weight with cable: 269g
Dimensions: 96.5 x 47 x 28mm

Scope of delivery:
- YGE Aureus 185
- RC connection cable
- Fan
- Sticker
- Instructions

YGE Aureus 185 Brushless ESC 265A with Telemetry # YGE-Aureus-265 749,00 €

Thu, 05 Feb 2026 14:23:20 +0100

Technical Specifications:

6 - 14S Lipo
Current 265A, 400A chest
BEC 5.5V - 12V
BEC 15A continuous, 30A peak
"T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, and the proprietary YGE protocol for additional telemetry connections via, for example, YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2, and Spirit FBL.
Updateable (optional USB adapter available)
completely revised hardware and software (32-bit)
the PWM frequency is automatically adjusted to the needs of the motor
The specified current is the maximum continuous full throttle current with good cooling
Reverse regulation or shutdown in case of undervoltage
Current limiting
Undervoltage detection can be switched off
Speed control (Governor mode)
Soft start (sine or block commutation)
Super slow soft start for scale helicopters possible (60sec.)
Active freewheel, therefore unlimited partial load resistance
Automatic timing, or adjustable in 6 levels
EMK brake adjustable
F3A / Acro brake (brake force continuously adjustable in flight)
Min. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. power)
Speed limit: 240,000 rpm (2-pole)
Overtemperature / overload warning
Anti-flash: Reduces the switch-on spark
Basic programming via mode setup
Fine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available
Weight with cable: 265g
Dimensions: 112 x 54 x 31mm

Scope of delivery:
- YGE Aureus 265
- RC connection cable
- Fan
- Sticker
- Instructions

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Mon, 15 Jun 2026 12:08:22 +0200

Mikado Power Backup 50F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 50F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

HOBBYWING Platinum Pro 150A V5.1 3-8S LiPo 10A BEC # HW30203501 169,90 €

Thu, 30 Jul 2026 03:19:17 +0200

Platinum Pro 150A V5.1 3-8S LiPo 10A BEC

The Platinum V5.1 150A is the ideal companion for electric helicopter and fixed-wing models. Equipped with the latest technology, it offers a variety of protective options to ensure a safe flight experience. The main new feature in version 5.1 is the revised switch mode BEC, which now supports 5 to 12 volts. Compared to the previous ESC version, the RPM accuracy algorithm makes the Platinum 150A even more powerful and reliable. The adjustable sensitivity for a constant speed also makes it easy for every pilot to find settings that suits their own flying style under current flight conditions.

The special design improves air circulation so that the operating temperature does not reach a critical level. The open design of the controller is immediately apparent. The additional use of thermal tape and another heat sink inside ensures an overall extension of the service life and improved heat dissipation on the external capacitors which are quite sensitive.

Features:

Improved switch-mode BEC with 5-12V instead of only up to 8V as with version 5
The 32-bit processor and the special algorithm for accurate RPM ensure even more power
Supports 520 to 580 flight models now instead of 550 to 580
Compatible with Mikado VBar Control and VBar Telemetry Ready and many more
Equipped with "DEO" (Driving Efficiency Optimization) for the best control characteristics and performance
Efficient cooling through ventilation slots on two sides
Multiple protective functions

Technical Specifications:

Current Cont./Peak:	150A/180A
No. of Cells:	3-8S
BEC Voltage:	5 - 12V @ 10A (Switch Mode)
BEC Current Cont./Peak:	10A / 30A
Cable Battery/Motor	1x 10AWG (red, black) 3x 12AWG (black)
Plugs Battery/Motor:	4mm gold plugs
Dimensions:	83,2 x 37,1 x 22,5mm
Weight:	150.4g
Optional Accessories:	HW30502001 LCD Program Box HW30850400 OTA Module
Application:	550-580 Elektric Helicopter (Main Rotor Length: 550-580mm)

Delivery:
1x ESC Platinum V5.1 150A
1x Manual

HOBBYWING Platinum Pro 180A HV ESC V5 6-14s BEC 10A # HW30209103 294,90 €

Sat, 25 Jul 2026 15:50:11 +0200

Hobbywing Platinum Pro 180A HV ESC V5 5-14s, 10 A BEC

The Platinum V5 180A HV V5 is an extremely powerful ESC with 5-12V switch BEC suitable for 550-700 helicopters and fixed-wing. This is ensured by the built-in 32-bit processor in combination with a specially developed algorithm for RPM accuracy, which clearly sets the performance of the controller apart from similar controllers on the market. In addition to the algorithm, the Platinum V5 with 180A is equipped with various protocols that allow different transmitter systems to read the data from the ESC. These include, for example, the Mikado VBar system and Futaba S.BUS2.

The modern advantages that the Platinum V5 brings with it are also evident in the structural design, such as the many protective functions to make the next flight as safe as possible. This includes protection against overheating of the actual controller but also the attached capacitors. To prevent too much heat from being generated in the first place and this protection having to be activated, the controller has a double-sided heat sink with side ventilation. This allows air to flow quickly through the inside of the ESC and cool it down efficiently. If that is no longer enough, the various protective functions take effect and prevent greater damage.

Features:

Efficient cooling through cooling chamber design
Built-in 12V switch BEC (5-12V)
Supports multiple data protocols e.g. Mikado VBar System, Futaba S.BUS2, etc.
Including data recording, accessible on the smartphone thanks to Bluetooth
Multiple protection functions (e.g. against reverse currents)
16 adjustable parameters including 4 flight modes:
- Fixed wing
- Helicopter - External Governor
- Helicopter - Eleven Governor
- Helicopter - Store Governor

Technical Specifications:

Type:	Brushless High Voltage
Current (cont./peak):	180A/260A
Cells:	6-14S LiPo
BEC:	5-12V @10A (Switch Mode)
Cable battery/motor:	1x 10AWG (red, black) 3x 10AWG (black)
Programming:	- LCD Programming Box - OTA Program Module
Firmware Upgrade:	Yes
Telemetry:	Mikado VBar; Futaba S.Bus2; etc.
Dimensions:	100.6 x 45.5 x 26.1mm
Weight (incl. cables):	250.6g
Application:	550-700 electric helicopters and fixed-wing

Delivery:
1x ESC Platinum V5 180A HV SBEC
1x Manual

HOBBYWING LCD Programmierbox Pro für Xerun, Ezrun und Platinum # HW30502002 45,90 €

Tue, 28 Jul 2026 00:37:00 +0200

Product information "Hobbywing LCD Programm Box Pro for Xerun, Ezrun and Platinum"

The multifunctional LCD Programming Box Pro, with its 2.8'' large LCD screen, provides the convenience of programming brushless ESCs quickly and easilywhether on the go or at home on the computer. With a USB-C adapter, the box can also be connected to a computer to update the firmware for example. Another feature is that the LCD Programming Box can measure the voltage of individual lithium cells or entire packs. So, three excellent functions in one compact device.

Note: Please refer to the programming settings of Your controller to find out which values can be set. Do not power the programming box unless the instructions for Your controller require the programming box to be powered by an external power supply.

Features:

Vivid display with a screen diagonal of 2.8'' (approximately 7cm)
Backlight adjustment with 20 available levels
Easy operation thanks to the control wheel
Save and export controller settings
Built-in battery tester for 1-8S batteries
Integrated Bluetooth signal
Compatible with the HW Link V2 app (iOS and Android)

Technical Specifications:

Input Voltage DC:	5-12.6V*
Ports:	- USB Typ-C - Regler - Stromversorgung
Display:	2.8'' LCD
LiPo Measurement:	2-8S LiPo / LiIon / LiFe
Measurement Accuracy:	+/- 0.1V
Dimensions:	105.6x59.24.4mm
Weight:	85g

*If the ESC does not have an integrated/external BEC, a separate battery is required for powering this programming box.

Supported ESCs:

XERUN car-ESCs: Version 2.0 and newer
EZRUN car-ESCs: Version 2.0 and newer
PLATINUM air-ESCs
Seaking Pro boat-ESCs
Selected QUICRUN car-ESCs

YGE Saphir 155 V2 Brushless ESC 155A 4-8S 5,5-12V BEC # YGE-Saphir-155-V2 359,00 €

Sun, 14 Jun 2026 19:14:13 +0200

YGE Saphir 155 V2 brushless speed controller 155A for 4-8S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 4 to 8s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 12A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight without/with cable: 122g/178g
- Dimensions: 82 x 43.5 x 26mm
- Cable cross-section battery / motor: 6² / 4²

YGE Aureus 135 V2 Brushless ESC 6-12S # YGE-Aureus-135-V2 469,00 €

Tue, 14 Jul 2026 11:16:14 +0200

Technical Specifications:

BEC 5,5V - 12V
BEC 10A continuous, 25A Peak
"T" for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL
Update capable (optional USB-Adapter available)
entirely overhauled hard- and software (32-bit)
the PWM-frequency will be set automatically to the requirements of the motor
The specified current is the maximum continuous full power current
6 to 12s LiPo, incl under voltage protection by power reduction
Current limiting
Disconnectable under voltage detection
Electronic speed control (Governor- mode)
Soft start
super soft startup for scale-helicopters possible (60 sec.)
Active free-wheel, allowing unlimited part load operation
Automatic or 6 step adjustable timing
Adjustable EMK brake
F3A(Acro brake (brake force control infinitely adjustable)
Frequency: 16 to 32 kHz
Speed limit: 240.000 rpm (2- Poles)
Temperature and overload warning
Anti- flash: decreases the closing spark
Basic -Programming with mode programming
Fine adjustment and selection of telemetry log with the PC Setup
Suitable USB-adapter optionally available
dimensions (mm): 82 x 43,5 x 26
weight with cables: 178g

Content:
- YGE Aureus 135 V2
- RC-Connection Cable
- Torodial Core
- Fan
- Sticker
- Manual

SUNNYSKY Brushless Motor Racing 4526 - 525KV / 36mm shaft 329,90 €

Mon, 30 Mar 2026 13:01:05 +0200

Technical details:

Part number:	C1000190
Model:	M4526 KV525 Y-S
rpm/V:	525KV
Stator / Poles:	12N / 10P
Stator Diameter / Thickness:	Ø45,5mm / 26mm
Motor Wind:	5+4 Delta thik wire
Motor Resistance:	9,6mΩ
Max Current:	110A
Max Peak Current:	170A
Max Continuous Power:	5200W
Max Peak Power:	8000W
Motor Diameter:	Ø56.3mm x 52mm
Shaft Diameter:	Ø6 x 36mm
Mounting Hole and Screws:	4 x Ø30mm M4
Max Lipo Cell:	12S
Motor Weight:	488g

HOBBYWING Platinum Pro 260A HV V5 ESC 6-14s 10A BEC # HW30203100 459,90 €

Tue, 28 Jul 2026 00:37:00 +0200

Hobbywing Platinum Pro 260A HV ESC 6-14s, 10A BEC

The Platinum V5 260A HV V5 provides constant speed control, ensuring an excellent flying experience with its powerful 12V switch-mode BEC. The innovative housing design, featuring additional windows on the sides and internal structure, enables highly effective heat dissipation. This allows the generated heat to be directly transported from the circuit board to the outside through the shortest path. This is particularly necessary because the integrated 32-bit processor enhances the RPM algorithm's precision, thereby further strengthening the overall performance of the Platinum ESC (Electronic Speed Controller). The finely adjustable speed sensitivity ultimately allows every pilot to find a setting that suits them perfectly.

The ESC also incorporates Efficiency Optimization Technology with Synchronous Rectification (DEO: "Driving Efficiency Optimization" - Active Freewheeling), which brings several advantages at once:
- Faster throttle response, improved flight stability, and flexibility.
- Higher driving efficiency and longer battery life.
- Lower temperature increase of the ESC, ensuring reliability.

Features:

Efficient cooling through a sophisticated heat dissipation system with windows
Built-in 12V switch-mode BEC (5-12V)
Supports multiple data protocols, e.g.,
Mikado VBar System, Futaba S.BUS2, MSH Brain, and iKON
Includes data recording accessible via the OTA module on the smartphone
Multiple protection features
16 adjustable parameters, including 4 flight modes:
- Fixed Wing
- Helicopter - External Governor
- Helicopter - Express Governor
- Helicopter - Store Governor

Technical Specifications:

Type:	Brushless High Voltage
Current cont./peak:	260A/400A
Cells:	6-14S LiPo
BEC:	5-12V @10A (Switch Mode)
Cable battery/motor:	1x 8AWG (red, black) 3x 10AWG (black)
Programming:	- LCD Programming Box - OTA Bluetooth Programmer - Seperate Programming Port
Firmware upgrade:	Yes
Telemetry:	Mikado VBar;Futaba S.Bus2; MSH iKon;Brain and etc.
Dimensions:	89x50x34mm
Weight (incl. cable):	297g
Application:	700-800 Electric Helicopter (main rotor length: 690-880mm)

Delivery:
1x ESC Platinum V5 260A HV SBEC
1x Manual

OXY Heli 6mm Tail Belt Set # OSP-1567 26,90 €

Wed, 11 Mar 2026 00:16:02 +0100

Tail Belt

Includes:
1x 6mm Tail Belt SET

Spare part suitable for:
OXY FLASH

Kontronik Brushless Motor PYRO 750-56L # 277101 494,90 €

Wed, 11 Mar 2026 00:15:51 +0100

The PYRO 750 continues the heritage of the KONTRONIK PREMIUM LINE. It is compact, extremely powerful, and has a continuous power of 4.5 kW. The PYRO 750 surges past the performance of the PYRO 700, approaching the levels previously set by the PYRO 800.

The unique design of the PYRO 750 provides shafts with four sizes. The internal shaft is 10 mm, allowing the use of 10 mm bearings for longer life, and an external shaft of 6 or 8 mm that allows it to easily fit most helicopters.

This little trick makes the PYRO 750 the ideal choice for all pilots who like to have more, but can't install the PYRO 800 because of reasons of space.

Four different RPM Versions are available, providing you with the perfect choice for your model. The "P" type PYRO 750 are especially made for powering huge sports planes.

The PYRO in short:

Neodym magnets, heat resistent up to 150 degree C
Dedicated enameled wire, heat resistent up to 300 degree C
Optimized metal sheets
Optimized ventilation
Radial fan
optimized magnet circuit

Specification:

560 RPM/V
Max. 30,000 RPM
14 poles
38.5 mm free shaft length
460 g / 16.2 oz
4.5 kW
6 mm Weshaftle
13 mΩ R_i

Suitable for helis up to Ø 180cm

as: T-Rex 700, Goblin 630, 700, 770, Logo 700 with HELI JIVE 120+ HV and 10-12S Lipo

Kontronik Brushless Motor PYRO 750-50L # 277091 494,90 €

Fri, 24 Jul 2026 15:17:14 +0200

The PYRO 750 continues the heritage of the KONTRONIK PREMIUM LINE. It is compact, extremely powerful, and has a power output of 4.5KW. The PYRO 750 surges past the performance of the PYRO 700, approaching the levels previously set by the PYRO 800.

The unique design of the PYRO 750 provides a shaft with two sizes. The internal shaft is 8mm, allowing the use of 8mm bearings for longer life, and an external shaft of 6mm that allows it to easly fit most helicopters.

If you need ultimate power for a 700 class helicopter, look no further as the PYRO 750 is the new powerhouse for the 700 class.

The PYRO in short:

Neodym magnets, heat resistent up to 150 degree C
Specialized wire, heat resisten up to 300 degree C
Perfectly balanced
Optimized metal sheets
Optimized ventilation

500 RPM/V
max. 25000 RPM
460 g
> 4.5 kW

Kontronik Brushless Motor PYRO 650-103 L Competion # 273081C 512,90 €

Fri, 13 Dec 2024 14:05:17 +0100

PYRO Competition Line – keine Kompromisse

Die COMPETITION Line richtet sich an alle Piloten, denen selbst PREMIUM nicht gut genug ist.

In Zusammenarbeit mit Holger Lambertus wurde für die PYRO Motoren eine Handwicklung kreiert, die Innenwiderstände in den Motoren sensationell gering werden lässt.

Konnte man die PYRO-Motoren bisher durch eine neue Wicklung noch verbessern - besser als in der COMPETITION Line geht es nicht mehr.

Die veränderte, sportliche Farbgebung hebt die COMPETITION Line auch optisch von der PREMIUM Line ab.

Freuen Sie sich auf Ihren PYRO COMPETITON - ein neues Flugerlebnis wartet auf Sie.

Der neue PYRO 650 steht seinen Familienmitgliedern in nichts nach. Seine Leistungsfähigkeit erreicht nahezu die Daten seines großen Bruders. Damit ist er der perfekte Motor für alle 600er Hubschrauber.

Bis zu 3kW Dauerlast stellen ausreichend Leistung auch für extremsten 3D Flug zur Verfügung. Die Drehzahlen sind auf den Einsatz mit 6S abgestimmt.

Das zeichnet den PYRO aus:

Neodym Magnete bis 150 Grad C hitzefest
Spezieller Lackdraht bis 300Grad C
Feingewuchtet
Angepasster Blechschnitt
Optimierte Luftführung
Radiallüfter
Optimierter Magnetkreis

Daten:

1030 U/min/V
3 kW Dauerleistung (drehzahlabhängig)
Länge 51,5mm
Durchmesser 50,8mm
Welle Ø 6mm / 40mm
290 g

Lieferumfang:
Pyro Competition Motor ohne individuelle Gravur!

Kontronik Brushless Motor PYRO 650-103 L # 273081 335,90 €

Thu, 02 Jul 2026 13:21:56 +0200

The PYRO 650 perfectly fits into the PYRO family and is almost as strong as the PYRO 700.

It is the perfect motor for 550 / 570 / 600 sized helicopters.

The PYRO 650 can handle up to 3 kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 6S.

PYRO 650 in short:

Neodym magnets, heat resistent up to 150 degree C
Dedicated enameled wire, heat resistent up to 300 degree C
Optimized metal sheets
Optimized ventilation
Radial fan
Optimized magnet circuit

Specification:

1030 RPM/V
max. 30,000 RPM
6 mm shaft
10 poles40 mm free shaft length
300 g / 10.6 oz
3 kW
12 mΩ R_i

Kontronik Brushless Motor PYRO 650-53 L # 27318 335,90 €

Thu, 25 Jun 2026 11:11:02 +0200

The PYRO 650 perfectly fits into the PYRO family and is almost as strong as the PYRO 700.

It is the perfect motor for 550 / 600 sized helicopters with 12S.

The PYRO 650 can handle up to 3 kW continuous power for ultimate 3D flight ability. The available RPM types fit perfectly to applications up to 12S.

PYRO 650 in short:

Neodym magnets, heat resistent up to 150 degree C
Dedicated enameled wire, heat resistent up to 300 degree C
Optimized metal sheets
Optimized ventilation
Radial fan
Optimized magnet circuit

Details:

530 RPM/V
Max. 30,000 RPM
6 mm shaft
10 poles
40 mm free shaft length
300 g / 10.6 oz
2 kW
36 mΩ R_i

XNOVA Lightning 4525-560kv # XN-LG-4525-560-A 439,90 €

Mon, 13 Jul 2026 16:51:31 +0200

XNOVA Lightning 4525-560kv # XN-LG-4525-560-A

Xnova LIGHTNING 4525 series ( thick Wire)

Designed for extrem 3D 630-690mm blade size helicopter where highest power to weight ratio is important. From 10S up to 12S ( KV related )

SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION. A,C,F

We have spent hours of testing to improve the very well established 4525 series. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over the full flight. The Xnova V3 lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor designed for extrem 3D, 630-690mm bladesize helicopter where highest power to weight ratio is important. It is a extreme power plant specially developed for the new SAB-black-thunder Goblin 650 helicopter. The 560KV version is a superb choice for 2 blade and 3 blade setups.

1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
2. Increased power output by the use of thicker hand wound YY single strand copper wires, heat resistant up to 300 degrees C.
3. High-performance neodymium magnets, heat resistant up to 180 degrees C.
4. All other features same as XTS series.

Slots & Poles	12n10p
Winding T	YY
rpm/V	560
Volt (V)	20 \| 30 \| 40
Io(A)	2.8\| 3.6 \|4.6
Rm (mohm)	7.9
Weight (without connector) (g)	500
Body Length (no shaft) mm	56
Diameter (mm)	55.7
Shaft Length (mm) (Details pictures)	36\| 60\| 61
Shaft Dia. (mm)	6 \| 8
Mounting Holes CTC Distance (mm)	4x30xM4
Mounting Screw	M4
Max Eff. Curr.	84.19 \| 116.92 \| 152.61 \|
Max Eff.	93.35 \| 93.84 \| 93.97 \|
Kt (Nm/A	0.0171
Km (Nm/sqrt(w))	0.1919
Max Continuous Power(Watts)	4500
Peak Continuous Power(Watts) (5 sec)	10000 (2sec)
Max cont. current (A)	100

XNOVA LG 4025-560KV Shaft A 36mm # XN-LG-4025-560-A 289,90 €

Mon, 18 May 2026 12:28:14 +0200

XNOVA Performance Motor 4025-560KV 3Y Shaft A # XN-LG-4025-560-A

We have spent hours of testing to improve the very well established 4025 series. The result is an even better overall performing motor with extreme low cogging torque and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over the full flight. The Xnova V3 lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor for 520-600 size helicopters for extremely hard 3d flying on 12s. For sport flying or longer flight times, the 2.5y or 3y is more suited. Extreme powerful motor for OXY Heli OXY 5
520-600 size helicopters for extremely hard 3d flying on 12S. ( KV related )

1. Improved higher efficiency with thinner stator lamination, resulting in lower temperature.
2. Optimized and unique design, hand wound to perfection
3. Smooth running, low cogging torque.
4. New type of higher degree magnets.
5. All other features same as performance series.

XNOVA Lightning 4025-1120KV shaft A # XN-LG-4025-1120-A 289,90 €

Thu, 25 Jun 2026 13:35:07 +0200

XNOVA Lightning 4025-1120KV shaft A # XN-LG-4025-1120-A

520-600 size helicopters for extremely hard 3d flying on 6S to 7S

Xnova brushless high performance outrunner motor for 520-600 size helicopters for extremely hard 3d flying on 6s. Extreme powerful motor for Goblin 570, Synergy E5 - E6, T-rex 600 or Logo 500 up to Logo 600.

1. Improved higher efficiency with thinner stator lamination, resulting in lower temperature.
2. Optimized and unique design, hand wound to perfection
3. Smooth running, low cogging torque.
4. New type of higher degree magnets.

5. All other features same as performance series.

Technische Daten:

Schema: 24N8P
Turns/Verschaltung: 1,5 Y
KV: 1120
RI: 6,8 mOhm
Gewicht (inkl. Kabel, ohne Stecker): ca. 395 g
Länge (ohne Welle): 56,2 mm
Durchmesser: 49,5 mm
Verfügbare Wellenlängen: 36 mm
Verfügbare Wellendurchmesser: 6 mm
Bohrung / Lochkreis (Montage): 4 x 25 und 4 x 30 mm
Befestigungsschrauben: M3 und M4
Maximale Dauerleistung: 3000 Watt
Maximale Spitzenleistung (5 Sek.): 4000 Watt
Maximal-Strom (Dauer): 110 A
Maximal-Strom (Spitze): 150 A