Live-Hobby.de/Spare Parts/Spare Parts Helicopter/OXY Heli/OXY 5 Spare Parts products

3x THETA RAZOR-DH1 Low-Profile Brushless HV Servo SET with NFC BLUE 323,90 €

Mon, 13 Jul 2026 12:34:47 +0200

THETA RAZOR-DH1 Low-Profile Brushless HV Servo with NFC - blue version

NFC programmable brushless HV servo in the 40 mm low-profile size.
The application range of the servo is versatile from helicopter swashplate servo from the 550 up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.
Due to the SANWA SSR compatibility, the advantages of Sanwa Super Response transmission can be used in the RC car sector.

Specifications:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,090 (secS/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	24 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,092 (sec/60°)
Speed at 6V	0,081 (sec/60°)
Speed at 7,4V	0,072 (sec/60°)
Speed at 8,4V	0,063 (sec/60°)

Torque at 5V	30 (kg/cm)
Torque at 6V	34 (kg/cm)
Torque at 7,4V	37 (kg/cm)
Torque at 8,4V	40 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-DH1 blue
with accessories

Azure Power 105 Xtreme Carbon Tailblade 105mm 30,90 €

Mon, 13 Jul 2026 16:51:31 +0200

Azure Power 105 Xtreme Heli Tail Blade 105mm

Technical Specifications:

Length:	105mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	--g
Width:	28.5mm - 31.5mm
Airfoil:	Symmetric

Azure Power Carbon 3-Blade Rotorblade 560mm 129,90 €

Sat, 13 Jun 2026 16:11:53 +0200

Azure Power Carbon 3-blades-Rotorblade 560mm

Technical Specifications:

Length:	560mm
Blade Grip:	>12mm
Hole:	4mm
Weight approx.:	--g
Width:	49-56mm
Airfoil:	Symmetric

Azure Power 105 PRO Carbon Tailblade 105mm 30,90 €

Mon, 27 Jul 2026 18:59:38 +0200

Azure Power 105 PRO Heli Tail Blade 105mm

This high performance tail blade has an unique design with a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved great performance of your tailrotor.

Technical Specifications:

Length:	105mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	7g
Width:	28.5mm - 31.5mm
Airfoil:	Symmetric

Azure Power AZ 105S Carbon Tailblade orange 105mm 30,90 €

Mon, 08 Jun 2026 12:22:04 +0200

Azure Heli Tail Blade 105mm

Length:	105mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	7g
Width:	28mm - 31.5mm
Airfoil:	Symmetric

Azure Power Carbon Tailblade 95mm 25,90 €

Sun, 26 Jul 2026 12:22:54 +0200

Azure Heli Tail Blade 95mm

Length:	95mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	6g
Width:	26,5mm - 29,5mm
Airfoil:	Symmetric

Azure Power Carbon Tailblade 105mm 30,90 €

Thu, 30 Jul 2026 11:43:32 +0200

Azure Heli Tail Blade 105mm

Length:	105mm
Blade Grip:	5mm
Hole:	3mm
Weight approx.:	7g
Width:	28mm - 31.5mm
Airfoil:	Symmetric

Azure Power Carbon Rotorblade 560mm 74,90 €

Mon, 27 Jul 2026 22:40:06 +0200

Azure Power Carbon Rotorblade 560mm

AZ560 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.

In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.

The AZ560 will unleash the full potential of your helicopter.

Technical Specifications:

Length:	560mm
Blade Grip:	>12mm
Hole:	4mm
Weight approx.:	109g
Width:	49-56mm
Airfoil:	Symmetric

Azure Power Carbon Rotorblade 600mm 95,90 €

Sun, 26 Jul 2026 12:22:54 +0200

Azure Power Carbon Rotorblade 600mm

AZ600 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.

In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.

The AZ600 will unleash the full potential of your helicopter.

Technical Specifications:

Length:	600mm
Blade Grip:	>12mm
Hole:	4mm
Weight approx.:	142g
Width:	53-59,5mm
Airfoil:	Symmetric

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

MS Composit RAPID2 585mm Carbon rotor blade # MS-R2-585FBL 94,90 €

Thu, 23 Jul 2026 08:14:11 +0200

MS Composit RAPID2

Rapid 2 is a new series of blades that is based on the previous Rapid line, with which it
shares a proven profile and production technology. The blades are manufactured in
precision hardened steel molds using the modern hot press molding method using top-
notch carbon prepreg materials. The blades are subsequently machined using CNC
machining technology, which guarantees high accuracy and repeatability. The new Rapid2
blades have a redesigned root shape for better folding into a blade caddy during transport.
They have an optimized center of gravity position to achieve ideal flight characteristics in a
wide range of flight conditions. And finally, a redesigned graphic design to increase
attractiveness and better visibility in the sky.

Technical specifications:
Length: 585mm
Width: 54mm
Profile thickness: 8mm
Blade grip: 12mm
Bore hole: 4mm
Weight per blade: 121g

THETA HELI SET 3x THM989 / 1x THM982 BLS HV Servo 359,90 €

Thu, 23 Jul 2026 14:56:15 +0200

THETA Heli Set 3x THM989 (35mm) for helicopter swashplate and the THM982 (35mm) for tail / Brushless HV Servo

The application range of the servo is helicopter in the 500 to 550 size.

Specifications THETA THM989 35mm swashplate servo:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,100 (sec/60°)
Speed at 6V	0,090 (sec/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	15 (kg/cm)
Torque at 6V	18 (kg/cm)
Torque at 7,4V	21 (kg/cm)
Torque at 8,4V	23 (kg/cm)

Weight	54g
Dimensions (mm)	35x15x34mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

THETA THM982 35mm tail Servo

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo THM989 (35mm)
1x Servo THM982 (35mm)

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Mon, 15 Jun 2026 12:08:22 +0200

Mikado Power Backup 50F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 50F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Brushless Drive Set 6S 520 - 600 (Shaft 36mm) 399,90 €

Wed, 15 Jul 2026 14:16:45 +0200

Powerful 6S power drive for RC helicopters in the 520-600 class

This high-quality 6S power drive was specially developed for ambitious pilots seeking maximum performance and reliability for their RC helicopters. It's perfect for models in the 520-600 class and delivers impressive performance while maintaining high efficiency.

Highlights:

* Maximum torque and high efficiency thanks to the powerful SUNNYSKY 4518 1100KV motor
* Ideal for all flying styles – whether precise 3D flying or smooth scale flight
* Supports rotor blades up to 630 mm (depending on gear ratio)
* Perfect fit thanks to the 36 mm long Ø6 mm motor shaft for many popular models

Content:

1x SUNNYSKY Brushless Motor Racing 4518 – 1100KV / Ø6 mm x 36 mm shaft
1x HOBBYWING Platinum Pro 150A V5.1 ESC (3-8S LiPo, 10A BEC) – Item No.: HW30203501

Compatible models:
OMP M5 / M6, Goblin 580, OXY 5 6S, SOXOS 550-600 and many other helicopters of this class.

ManiaX HV LiPo 6S 6500mAh 22.8V High Voltage 100C 189,90 €

Wed, 29 Jul 2026 09:03:38 +0200

The ManiaX Power HV LiPo Batteries are characterized by:

- More number of cycles with less wear
- High charge rate
- High voltage under full load
- Constant voltage level
- Power until the end of the flight
- Low internal resistance
- Low heating even under full load
- Top performance / discharge rate / weight ratio

Technical specifications:
- Voltage: 22,8V
- Capacity: 6500mAh
- Discharge rate: 100C
- Discharge rate Peak: 200C
- Charging current: 1-3C Max 5C
- Dimensions H*W*L : 52*48*155mm
- Weight: ca. 850g
- Balancer connector: XH
- Discharge cable length: 14cm
- Discharge cable: 8AWG
- Discharge connector: 2 wires for power

THETA KENNY KO EDITION HV SERVO SET 3S 12V Brushless 3x THL787H 1x THL782H 519,90 €

Thu, 23 Jul 2026 14:51:57 +0200

THETA KENNY KO EDITION HV SERVO SET 3S 12V Brushless 3x THL787H 1x THL782H

This is a box set, which includes 3 THL787H cyclic servos and a THL782H tail servo. The servos were optimized in collaboration with multiple time world champion, Kenny Ko.

High Voltage 3S 12V
High Speed
Excellent Centering
Compatible with Futaba type horns/arms
Light Weight

The area of application of the servo set is for helicopters from the 550 to the 800+ size.

Specifications THL787H swashplate servo:


Motor	Brushless
Operating Voltage	7,5V bis 12,6V

Speed at 7,5V	0,09 (sec/60°)
Speed at 9,0V	0,08 (sec/60°)
Speed at 11,1V	0,07 (sec/60°)
Speed at 12,6V	0,06 (sec/60°)

Torque at 7,5V	24 (kg/cm)
Torque at 9,0V	28 (kg/cm)
Torque at 11,1V	33 (kg/cm)
Torque at 12,6V	38 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	1520µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications THL782H Tailservo:


Motor	Brushless
Operating Voltage	7,5V bis 12,6V

Speed at 7,5V	0,065 (sec/60°)
Speed at 9,0V	0,057 (sec/60°)
Speed at 11,1V	0,050 (sec/60°)
Speed at 12,6V	0,045 (sec/60°)

Torque at 7,5V	12 (kg/cm)
Torque at 9,0V	14 (kg/cm)
Torque at 11,1V	17 (kg/cm)
Torque at 12,6V	19 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	760µs
Maximale Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo THL787H
1x Servo THL782H

HOBBYWING Platinum Pro 120A V5 3-8S LiPo 10A BEC # HW30203402 139,90 €

Mon, 27 Jul 2026 13:42:09 +0200

Platinum Pro 120A V5 3-8S LiPo 10A BEC

The Platinum V5 120A is small, powerful and, like the other ESC in the Platinum V5 series, it is characterized by particularly efficient heat dissipation. As a flight controller, it feels right at home in electronic helicopters of size 420-520. But of course, due to its specifications, it can also be used in medium-sized fixed-wing aircrafts.

The Platinum 120A V5 is equipped with a switchable BEC that can be set in the range 5 to 12 volts. In addition, the BEC also has a new anti-reverse circuit that can be used in parallel with external batteries, thus offering double protection. Compared to previous controller versions, the RPM accuracy algorithm also makes the Platinum 150A more powerful and reliable. The adjustable sensitivity for a constant speed enables every pilot to find a setting that suits their own flying style and the current flight conditions.

The special design also improves air circulation so that the operating temperature does not reach a critical level. The open design of the Platinum 120A V5 ESC is immediately apparent. The additional use of thermal tape and another heat sink inside extends the service life and improves heat dissipation on the otherwise sensitive external capacitors.

Features:

Switch-mode BEC with 5-12V
The 32-bit processor and the special algorithm for accurate RPM ensure enough power
Compatible with Mikado VBar Control and VBar Telemetry Ready and many more
Equipped with "DEO" (Driving Efficiency Optimization) for the best control characteristics and performance
Efficient cooling through ventilation slots on two sides
Multiple protective functions

Technical Specifications:

Type:	Brushless
Current (cont./peak):	120A/150A
Cells:	3-8S
BEC Voltage:	5-12V @ 10A (Switch Mode)
BEC Current (cont./peak):	10A/30A
Cable Battery/Motor	1x 10AWG (red, black) 3x 12AWG (black)
Plugs Battery/Motor:	4.0mm gold connectors
Dimensions:	83.2 x 37.1 x 22.5mm (without fan)
Weight:	150.4g
Optional Accessories:	HW30502001 LCD Program Box HW30850400 OTA Module
Application:	420-520 electric helicopter (main rotor length: 420-520mm)

Delivery:
1x ESC Platinum V5 120A
1x Manual

HOBBYWING Platinum Pro 150A V5.1 3-8S LiPo 10A BEC # HW30203501 169,90 €

Thu, 30 Jul 2026 03:19:17 +0200

Platinum Pro 150A V5.1 3-8S LiPo 10A BEC

The Platinum V5.1 150A is the ideal companion for electric helicopter and fixed-wing models. Equipped with the latest technology, it offers a variety of protective options to ensure a safe flight experience. The main new feature in version 5.1 is the revised switch mode BEC, which now supports 5 to 12 volts. Compared to the previous ESC version, the RPM accuracy algorithm makes the Platinum 150A even more powerful and reliable. The adjustable sensitivity for a constant speed also makes it easy for every pilot to find settings that suits their own flying style under current flight conditions.

The special design improves air circulation so that the operating temperature does not reach a critical level. The open design of the controller is immediately apparent. The additional use of thermal tape and another heat sink inside ensures an overall extension of the service life and improved heat dissipation on the external capacitors which are quite sensitive.

Features:

Improved switch-mode BEC with 5-12V instead of only up to 8V as with version 5
The 32-bit processor and the special algorithm for accurate RPM ensure even more power
Supports 520 to 580 flight models now instead of 550 to 580
Compatible with Mikado VBar Control and VBar Telemetry Ready and many more
Equipped with "DEO" (Driving Efficiency Optimization) for the best control characteristics and performance
Efficient cooling through ventilation slots on two sides
Multiple protective functions

Technical Specifications:

Current Cont./Peak:	150A/180A
No. of Cells:	3-8S
BEC Voltage:	5 - 12V @ 10A (Switch Mode)
BEC Current Cont./Peak:	10A / 30A
Cable Battery/Motor	1x 10AWG (red, black) 3x 12AWG (black)
Plugs Battery/Motor:	4mm gold plugs
Dimensions:	83,2 x 37,1 x 22,5mm
Weight:	150.4g
Optional Accessories:	HW30502001 LCD Program Box HW30850400 OTA Module
Application:	550-580 Elektric Helicopter (Main Rotor Length: 550-580mm)

Delivery:
1x ESC Platinum V5.1 150A
1x Manual

Mikado VStabi EVO VLink 7.x Express Alu-case orange # 05571 279,00 €

Wed, 11 Mar 2026 00:16:36 +0100

VBar EVO Highlights

New processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest available computing power on the market to this date
Innovative step-up/step-down voltage supply from 2 V up to 16 V at full power with high efficiency (less excess heat)
Full telemetry and range down to 2 V supply voltage
Improved high frequency technology for high power and sensitivity
Double sensor system using tried and tested technology and new sensors

The hardware allows for new specs:
Frame rates adjustable up to 1 kHz (1 ms) on the swash plate and 0.5 ms on the tail
ESC frame rate up to 1 KHz
Pulse width selecable between 1.5 ms down to 125 µS as well as digital high speed protocols
Improved algorithms: adjusted tot he new frame rates, new optimized digital filtering
Dynamic swash plate rotation (per bank)
New „Tail Torque Extension“ for motor driven tails, more control when the tail rotor is unloaded

Mikado VStabi EVO VLink 7.x Express neon-yellow # 05582 279,00 €

Thu, 30 Jul 2026 03:19:17 +0200