Live-Hobby.de/Spare Parts/Spare Parts Helicopter/OXY Heli/OXY 4 MAX Spare Parts products

Azure Power Carbon Rotorblade 385mm 47,90 €

Thu, 09 Jul 2026 01:35:05 +0200

Azure Power Carbon Rotorblade 385mm

AZ385 series blade features a unique design that has been carefully and repeatedly tested to position the perfect propeller center of gravity. Excellent center of gravity increases flight stability while providing fast pitch response and precise control. The blades are built with premium carbon fiber.

In addition, the optimized design of the tip contour has been given special attention and lowers overall noise levels. This new tip reduces energy loss and reduces the speed changes when loaded. This means overall efficiency has been improved.

The blade design features a non-uniform chord width across the entire blade. Combined with a unique airfoil, these aspects provide improved flight performance and smooth control.

The AZ385 will unleash the full potential of your helicopter.

Technical Specifications:

Length:	385mm
Blade Grip:	>5mm
Hole:	3mm
Weight approx.:	45g
Width:	35,3-41,2mm
Airfoil:	Symmetric

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

MS Composit RAPID2 385mm Carbon Rotor blade # MS-R2-385FBL 54,90 €

Tue, 07 Jul 2026 21:36:47 +0200

MS Composit RAPID2

Rapid 2 is a new series of blades that is based on the previous Rapid line, with which it
shares a proven profile and production technology. The blades are manufactured in
precision hardened steel molds using the modern hot press molding method using top-
notch carbon prepreg materials. The blades are subsequently machined using CNC
machining technology, which guarantees high accuracy and repeatability. The new Rapid2
blades have a redesigned root shape for better folding into a blade caddy during transport.
They have an optimized center of gravity position to achieve ideal flight characteristics in a
wide range of flight conditions. And finally, a redesigned graphic design to increase
attractiveness and better visibility in the sky.

Technical specifications:
Length: 385mm
Width: 43mm
Profile thickness: 6.5mm
Blade grip: 5mm
Bore hole: 3mm
Weight per blade: 43g

MS Composit Rapid FBL CFC main blades 38cm/5/3 # MS-R20380FBL 48,90 €

Tue, 07 Jul 2026 19:12:57 +0200

Rapid FBL CFC main blades 38cm/5/3

New high performance carbon blades of Rapid line are designed for a wide range of RC Heli pilots from a beginner up to a professional 3D specialist.
Thanks to the extraordinary stiffness in bending and torsion, these blades have a steady performance and stability also in very hard 3D maneuvers.
The beginning pilot will appreciate the high resistance against small collisions.
Thanks carefully selected and precisely followed airfoil the Rapid blades works with a smaller aerodynamic resistance also at big angle of pitch, which means smaller power consumption.
It is a big value, at first for 3D flying, also the common pilots can fly longer time especially with electric powered helicopters.

Rapide rotor blades are manufactured in high precision hardened steel molds using highest quality prepreg carbon composites used in aerospace industry. Processing at high temperatures and pressures gives the material excellent mechanical properties and thermal and dimensional stability.
Production and processing after removal form the mold by machine method using CNC technology. This ensures maximum accuracy and stable production characteristics of the products with high and permanent quality with no difference between the products purchased with plenty of time.
The whole line of these blades has been intensively and thoroughly tested by the best pilots and carefully tuned for the best flight characteristics.
Strongly colored ends of the blades are beneficial for good visibility and ease of positioning the helicopter during flight.
The FBL Series Blades are optimized for Flybarless Helicopter.
Each pair of these blades is carefully and precisely balanced.

Technical specifications:
Length: 380mm
Width: 43mm
Root: 5mm
Hole: 3mm
Weight: 40g

Suitable for:
Goblin 380
MS Composit # MS-R20380FBL

THETA THS921A HV Digital Servo 64,90 €

Thu, 23 Jul 2026 14:56:34 +0200

THETA THS921A HV Digital Servo

The application range of the servo is versatile from helicopter swashplate servo 250 size to 380 size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Coreless
Operating Voltage	6V bis 8,4V


Speed at 6V	0,12 (sec/60°)
Speed at 7,4V	0,10 (sec/60°)
Speed at 8,4V	0,09 (sec/60°)


Torque at 6V	6,6 (kg/cm)
Torque at 7,4V	7,8 (kg/cm)
Torque at 8,4V	8,6 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

Accessories:
1x Servo THS921A
4x Servo horn
1x Screw M3
4x Tapping screw for servo

Mikado VStabi EVO VLink 7.x Express Alu-case orange # 05571 279,00 €

Wed, 11 Mar 2026 00:16:36 +0100

VBar EVO Highlights

New processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest available computing power on the market to this date
Innovative step-up/step-down voltage supply from 2 V up to 16 V at full power with high efficiency (less excess heat)
Full telemetry and range down to 2 V supply voltage
Improved high frequency technology for high power and sensitivity
Double sensor system using tried and tested technology and new sensors

The hardware allows for new specs:
Frame rates adjustable up to 1 kHz (1 ms) on the swash plate and 0.5 ms on the tail
ESC frame rate up to 1 KHz
Pulse width selecable between 1.5 ms down to 125 µS as well as digital high speed protocols
Improved algorithms: adjusted tot he new frame rates, new optimized digital filtering
Dynamic swash plate rotation (per bank)
New „Tail Torque Extension“ for motor driven tails, more control when the tail rotor is unloaded

Mikado VStabi EVO VLink 7.x Express neon-yellow # 05582 279,00 €

Thu, 30 Jul 2026 03:19:17 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case purple # 05570 279,00 €

Sun, 26 Jul 2026 17:12:12 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case brown # 05573 279,00 €

Wed, 11 Mar 2026 00:16:35 +0100

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case black # 05568 279,00 €

Sun, 12 Jul 2026 23:16:52 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case gold # 05574 279,00 €

Mon, 27 Jul 2026 18:59:38 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case grey # 05567 279,00 €

Thu, 09 Jul 2026 11:58:04 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case green # 05569 279,00 €

Sun, 26 Jul 2026 15:22:10 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case red # 05572 279,00 €

Thu, 30 Jul 2026 08:41:27 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case blue # 05566 279,00 €

Thu, 25 Jun 2026 11:40:45 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express white # 05581 279,00 €

Mon, 30 Mar 2026 08:04:57 +0200

VBar EVO Highlights

HOBBYWING Platinum Pro 80A V5 3-8S LiPo 5-12V/8A BEC # HW30203201 84,90 €

Wed, 22 Jul 2026 06:37:37 +0200

Hobbywing Platinum Pro 80A ESC V5 3-8s, 5-12V/8A BEC

The Platinum V5 80A V5 is an extremely powerful ESC with 5-12V switch BEC suitable for 325420 helicopters and fixed-wing. This is ensured by the built-in 32-bit processor in combination with a specially developed algorithm for RPM accuracy, which clearly sets the performance of the controller apart from similar controllers on the market. In addition to the algorithm, the Platinum V5 with 80A is equipped with various protocols that allow different transmitter systems to read the data from the ESC. These include, for example, the Mikado VBar system and Futaba S.BUS2.

The modern advantages that the Platinum V5 brings with it are also evident in the structural design, such as the many protective functions to make the next flight as safe as possible. This includes protection against overheating of the actual controller but also the attached capacitors. To prevent too much heat from being generated in the first place and this protection having to be activated, the controller has a double-sided heat sink with side ventilation. This allows air to flow quickly through the inside of the ESC and cool it down efficiently. If that is no longer enough, the various protective functions take effect and prevent greater damage.

Features:

Efficient cooling through cooling chamber design
Built-in 12V switch BEC (5-12V)
Supports multiple data protocols e.g. Mikado VBar System, Futaba S.BUS2, etc.
Including data recording, accessible on the smartphone thanks to Bluetooth
Multiple protection functions (e.g. against reverse currents)
16 adjustable parameters including 4 flight modes:
- Fixed wing
- Helicopter - External Governor
- Helicopter - Eleven Governor
- Helicopter - Store Governor

Technical Specifications:

Type:	Brushless High Voltage
Current (cont./peak):	80A/120A
Cells:	3-8S LiPo
BEC:	5-12V @8A (Switch Mode)
Cable battery/motor:	1x 12AWG (red, black) 1x 14AWG (black)
Programming:	- LCD Programming Box - OTA Program Module
Firmware Upgrade:	Yes
Telemetry:	Mikado VBar; Futaba S.Bus2; etc.
Dimensions:	60.5 x 33 x 17.6mm
Weight (incl. cables):	77.5g
Application:	325-420 class electric helicopter (main blade length 325-420mm) or fixed-wing

Delivery:
1x ESC Platinum V5 80A SBEC
1x Manual

THETA HELI Brushless SET 3x THS921B / 1x THM982 299,90 €

Fri, 24 Jul 2026 17:20:06 +0200

THETA Helicopter Set 3x THS921B Brushless (23mm) for swashplate and the THM982 (35mm) for tail

The field of application of the servo set is for helicopters from 450 to 500 size.

THETA THM921B 23mm Brushless swashplate servo:

Specifications:


Motor	Brushless
Operating Voltage	6V bis 8,4V



Speed at 6V	0,100 (sec/60°)
Speed at 7,4V	0,090 (sec/60°)
Speed at 8,4V	0,080 (sec/60°)


Torque at 6V	7,7 (kg/cm)
Torque at 7,4V	8,9 (kg/cm)
Torque at 8,4V	9,8 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 4,9mm (Nexspor usw.)

THETA THM982 Brushless HV Servo

The application range of the servo is versatile from helicopter tail servo in 450-600 midi size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.3 current consumption
Speed bei 5V	0,080 (sec/60°)
Speed bei 6V	0,070 (sec/60°)
Speed bei 7,4V	0,060 (sec/60°)
Speed bei 8,4V	0,050 (sec/60°)

Torque bei 5V	6 (kg/cm)
Torque bei 6V	7 (kg/cm)
Torque bei 7,4V	8 (kg/cm)
Torque bei 8,4V	9 (kg/cm)

Weight	42g
Dimensions (mm)	35x15x31mm
Neutral pulse (factory-made)	760µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THM921B
1x Servo THM982

THETA THS921B Brushless HV Digital Servo 79,90 €

Fri, 24 Jul 2026 17:10:24 +0200

THETA THS921B Brushless HV Digital Servo

The application range of the servo is versatile from helicopter swashplate servo 250 size to 420 size, in function models, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.

Specifications:


Motor	Brushless
Operating Voltage	6V bis 8,4V



Speed at 6V	0,100 (sec/60°)
Speed at 7,4V	0,090 (sec/60°)
Speed at 8,4V	0,080 (sec/60°)


Torque at 6V	7,7 (kg/cm)
Torque at 7,4V	8,9 (kg/cm)
Torque at 8,4V	9,8 (kg/cm)

Weight	21g
Dimensions (mm)	23x12x27,4mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5mm (Nexspor usw.)

Accessories:
1x Servo THS921B
4x Servo horn
1x Screw M3
4x Tapping screw for servo

NEXSPOR BLS3507T Brushless HV Digital Servo 35mm (Tail) # BLS3507T 74,90 €

Mon, 27 Jul 2026 09:35:43 +0200

BLS3507T –Ultra fast Brushless Mini 35mm Tailservo for helicopter of the 450 – 600 class

The new Nexspor 35mm brushless servo has been tested and optimized to the limit in countless flights by our team for maximum performance and long life.
The servos are characterized by high speed, positioning accuracy and a lot of power. Pleasant is also the operating noise.
The crunching and crackling is a thing of the past in the stand and under load.

The softstart protects the BEC and the mechanics of the Heilis in initialization.

Feature:

- Extremely fast tail servo
- High quality brushless motor
- High quality potentiometer
- Softstart
- High precision steel gear
- High resolution
- Full CNC aluminium case
- Dual ball bearings
- Ideal for 450 - 600 class helicopter tail

Specifications:

Operating Voltage	DC 6,0-8,4V
Speed at (6,0V)	0,04 sec/60°
Speed at (7,4V)	0,033 sec/60°
Speed at (8,4V)	0,03 sec/60°
Torque at (6,0V)	5,9 kg/cm
Torque at (7,4V)	7,0 kg/cm
Torque at (8,4V)	7,5 kg/cm
Dead Band	0,002ms
Neutral pulse	760µs
Working Frequency	560Hz
Dimensions (mm)	35x15x33,4
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx etc..)
Weight	49g
Connecting wire	JR225mm

Accessories:

1x Servo BLS3507T
1x Servo horn
2x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo