Live-Hobby.de/Spare Parts/Spare Parts Helicopter/OMPHOBBY/OMPHOBBY M2 products

Mikado VLink S.BUS Telemetry Receiver for Micro Helis # 05680 69,00 €

Thu, 09 Jul 2026 11:57:57 +0200

small, lightweight S.BUS compatible receiver, weighs only 4.2 g

allows operation of micro helis with VBar Control

full telemetry-support with OMPHOBBY OFS3 (e.g. M1/M2V3)

antenna diversity

VBasic/RX Only-Firmware, fully functional

online updatable

Indoor Receiver for use on small models like micro helis, park flyers, typically not a full range receiver

Product data:

Dimensions:	32 x 18 x 5 mm
Weight:	4,2 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- Mikado VLink S.BUS Telemetry Receiver
- Printed Manual (Quick-Start-Guide)

GOOSKY S2 / S2 MAX / S2 Ultra adapter XT30 to XT60 # GT000071 3,39 €

Tue, 28 Jul 2026 14:23:39 +0200

adapter XT30 to XT60

Spare part suitable for:
GOOSKY Legend S2 / S2 MAX / S2 Ultra

OMPHOBBY Spektrum connection cable (3pcs) # OSHM2074 2,99 €

Sun, 19 Jul 2026 21:54:06 +0200

Spektrum connection cable (3pcs)

Spare part suitable for:
OMPHOBBY M1 / M1 EVO / M2 2019 / M2 V2 / M2 EVO / M2 EVO MK2 / M2 Explore
GOOSKY S2

Jeti Receiver Duplex 2.4EX R7 nano Plug and Play Microheli 84,90 €

Wed, 22 Jul 2026 12:28:02 +0200

Jeti Receiver Duplex 2.4EX R7 nano Plug and Play mounted for Microhelis.

The SBUS output with micro SBUS plug is already activated.

Suitable for e.g.: OMPHOBBY M1, M2 / SKYGOO S2 etc..

Graupner Receiver GR-12L Plug and Play Microheli # S1045SBUS 75,90 €

Sat, 25 Jul 2026 22:16:02 +0200

Graupner Receiver GR-12L Plug and Play mounted for Microhelis.

The SBUS output with micro SBUS plug is already activated.

Suitable for e.g.: OMPHOBBY M1, M2 / SKYGOO S2 etc..

Description GL-12L in general:

The GR-12L receiver can control 12 or 16 channels

With the Graupner HoTT 2.4 GHz technology used, the Graupner GR-12L receiver features state-of-the-art components and software.

Antenna diversity.

The HoTT technology uses up to 75 channels. This ensures extreme operational reliability and insensitivity to external interference.

Receiver voltage, temperature and signal strength are transmitted without additional sensors. Failsafe and Hold are programmable. The input sensitivity of the receiver and thus the range could be significantly increased.

The small and extremely light receiver is used with SUMD, SBUS or SP2048 on Copter Flight Controls or Flybarless systems.

The RSSI value can be output with SUMD, SBUS or SP2048 on channel 8, 12 or 16.

3 additional solder terminals for K2-4 for servo pulse output or level output (0V or 3.3V max. 4mA) for switching LEDs or transistors.

The GR-12L receiver has a wide voltage range from 3.6 V - 8.4 V (operable up to 2.5 V) for high reliability, even with voltage fluctuations.

A red LED clearly indicates the operating status of the HoTT receiver at all times.

In our Graupner online shop you will find the right accessories and spare parts for model making - the right remote controls, chargers, servos, NiMH and LiPo batteries.

Hole spacing 20 mm x 20 mm. Hole diameter 3 mm.

The sides can be easily removed so that the receiver has the dimensions 25 mm x 15 mm x 4 mm.

Product Features

The use of up to 75 channels ensures extreme operational reliability and is insensitive to external interference.
Wide receiver voltage range from 3.6 V - 8.4 V (functional up to 2.5 V)
The red LED indicates the operating status
The size and the weight could be reduced
The receiver input sensitivity and thus the range has been further increased.
Failsafe, Hold programmable

Functions

telemetry connection
SUMD signal for 8 channels for Copter Flight Controls (e.g. Betaflight and Raceflight) and Flybarless systems (e.g. for V-Stabi, Microbeast)
Technical data
Width [mm]: 25 (15) mm
Height [mm]: 4 mm
Temperature range [°C]: -15...+70 °C
Antenna length [mm]: 2x wire 145 (antenna 30) mm
Total weight [g]: 4 g
frequency: 2400...2483.5 MHz
Range approx. [m]: ~3000 m
Length [mm]: 25 mm
Dimensions [LxWxH in mm]: 25 x 25 (15) x 4 mm
Modulation: 2.4 GHz FHSS
Current consumption [mA]: 70 mA
Operating voltage [V]: 4...10 V
Gyro: No
Channels: 8 / 12 / 16
Telemetry capable: Yes
Number of antennas: 2

Specification:

Width [mm]: 25 (15) mm
Height [mm]: 4 mm
Temperature range [°C] : -15...+70 °C
Aerial length [mm]: 2 x Wire 145 (Antenna 30) mm
All-up weight [g]: 4 g
Frequency : 2400...2483.5 MHz
Range approx. [m] : ~3000 m
Overall length [mm]: 25 mm
Dimensions [LxWxH in mm]: 25 x 25 (15) x 4 mm
Modulation: 2.4 GHz FHSS
Current consumption [mA]: 70 mA
Operating voltage neutral [V] : 4...10 V
Channels: 8 / 12 / 16
Telemetry capable: Yes
Number of antennas: 2

OMPHOBBY Spektrum compatible DSM2 / DSMX Satellite receiver # OSHM2345 25,99 €

Wed, 29 Jul 2026 16:25:08 +0200

Spektrum compatible DSM2 / DSMX Satellite receiver with bind button

For transmitters in the iX and NX series, it may be necessary to activate the compatibility mode for DX transmitters.

Spare part suitable for:
OMPHOBBY M1 / M1 EVO / M2 2019 / M2 V2 / M2 EVO / M2 EVO MK2 / M2 Explore / M2 V3 PRO

Ladekabel mit 4mm Banane auf XT30 # ZB-LK-XT30 3,90 €

Mon, 27 Jul 2026 16:30:45 +0200

Ladekabel mit

4mm Goldkontaktstecker für an das Ladegerät auf XT30 Stecker

Radiomaster ZORRO ELRS Transmitter EU-LBT 159,90 €

Tue, 30 Jun 2026 22:46:03 +0200

Radiomaster ZORRO ELRS EU-LBT – Compact remote control for the highest demands

The Radiomaster ZORRO ELRS EU-LBT is a powerful and handy remote control specially developed for model building. With the EU-LBT radio standard, the transmitter is ideal for use in Europe – it ensures a stable connection and a long range in accordance with applicable guidelines.

Key Features:

Compact design: The ergonomic and lightweight construction makes the ZORRO ELRS the ideal choice for anyone looking for a portable and convenient remote control.

EU-LBT compliant: The integrated EU-LBT radio transmitter complies with European frequency specifications and is therefore legally and technically up to date.

Pre-configured models from Live-Hobby.de:
We at Live-Hobby.de install the appropriate programs for your OMPHOBBY helicopter before shipping.
* ELRS receiver with SBUS – for OMPHOBBY models such as the M1/M1 EVO and M2/M2 EVO
* ELRS receiver – for helicopters with OFS3 flight control (e.g., M2 EVO MK2, M2 V3), including telemetry

The transmitter is ready to use right away – simply switch it on and start flying.

Batteries included: Two 18350 batteries are included – for immediate setup without any additional purchases.

Content:

* Radiomaster ZORRO ELRS EU-LBT transmitter
* 2x 18350 batteries
* Pre-installed programs for OMPHOBBY M1/M1EVO, M2/M2EVO, M2 EVO MK2, and M2 V3

Radiomaster Transmitter Pocket ELRS EU-LBT 89,90 €

Sun, 26 Jul 2026 20:25:49 +0200

The Radiomaster transmitter Pocket ELRS EU-LBT is a compact, powerful remote control that was specially developed for use in model making.

The Pocket ELRS works with the EU LBT radio standard, which makes it suitable for use in Europe and ensures a stable connection and long range.

Special features:

We at Live-Hobby.de install the appropriate programs for your OMPHOBBY helicopter before shipping.
* ELRS receiver with SBUS – for OMPHOBBY models such as the M1/M1 EVO and M2/M2 EVO
* ELRS receiver – for helicopters with OFS3 flight control (e.g., M2 EVO MK2, M2 V3), including telemetry

The transmitter is ready to use right away – simply switch it on and start flying.

Batteries included: Two 18650 batteries are included – for immediate setup without any additional purchases.

Content:

   * Radiomaster transmitter Pocket ELRS EU-LBT
   * 2x 18650 batteries
   * Pre-installed programs for OMPHOBBY M1/M1EVO, M2/M2EVO per SBUS und EVO MK2, M2 V3 per CRSF
   * Transmitter bag

Radiomaster Transmitter Pocket CC2500 EU-LBT 89,90 €

Tue, 21 Jul 2026 13:17:43 +0200

The Radiomaster transmitter Pocket CC2500 EU-LBT is a compact, powerful remote control that was specially developed for use in model making. The Pocket CC2500 works with the EU LBT radio standard, which makes it suitable for use in Europe and ensures a stable connection and long range.

Special features:

    Compact design: The Radiomaster Pocket CC2500 is particularly handy and ideal for pilots who are looking for a light and portable remote control.

    EU-LBT support: With the EU-LBT radio module, the transmitter is approved in accordance with European radio frequency regulations.

    Pre-installed programs: The transmitter is already pre-installed with the programs for OMPHOBBY M1/M1EVO, M2/M2EVO, so you can start controlling your models immediately.

    Batteries included: The scope of delivery includes 2x 18650 batteries.

Content:

   * Radiomaster transmitter Pocket CC2500 EU-LBT
   * 2x 18650 batteries
   * Pre-installed programs for OMPHOBBY M1/M1EVO, M2/M2EVO
   * Transmitter bag

OMPHOBBY M2/ M2 V2/ M2 EVO/ M2 EXP Flight Control Damping Shing set（3pcs） # OSHM2052 5,99 €

Thu, 14 May 2026 15:26:45 +0200

Flight Control Damping Shing set（3pcs）

Spare part suitable for:
OMPHOBBY M2 2019 / M2 V2 / M2 EVO / M2 Explore

Radiomaster RP2 V2 ExpressLRS Nano Receiver with SBUS # OSHM2361 26,99 €

Wed, 29 Jul 2026 08:51:52 +0200

RP2 V2 ExpressLRS 2.4ghz Nano Receiver with SBUS cable suitable for OFS2

The SBUS output is already activated.

Spare part suitable for:
M1 / M1 EVO / M2 / M2 V2 / M2 EVO / M2 Explore

OMPHOBBY M2/ M2 V2/ M2 EXP / EVO Main Rotor Holder Screw group # OSHM2004 2,49 €

Fri, 24 Jul 2026 13:25:06 +0200

Main Rotor Holder Screw group

Spare part suitable for:
OMPHOBBY M2 2019 / M2 V2 / M2 Explore / EVO

OMPHOBBY 4-pin CRSF adapter Cable for OFS3 ELRS receiver # OSHM2133 2,99 €

Tue, 28 Jul 2026 21:57:59 +0200

4-pin CRSF adapter Cable for OFS3 ELRS receiver

Content:
2x 4-pin CRSF adapter Cable for OFS3 ELRS receiver

Spare part suitable for:
OMPHOBBY OFS3 / M2 MK2 / M2 V3 PRO

OMPHOBBY M2 Thrust Bearing # OSHM2005 5,99 €

Tue, 21 Jul 2026 07:10:46 +0200

Thrust Bearing

Spare part suitable for:
OMPHOBBY M2

OMPHOBBY M2 Canopy Grommet Set # OSHM2058 2,99 €

Thu, 30 Jul 2026 12:23:44 +0200

Canopy Grommet Set

Spare part suitable for:
OMPHOBBY M2

OMPHOBBY M2 Main Rotor Blade Grip Bearing Set # OSHM2048 7,99 €

Thu, 23 Jul 2026 15:32:32 +0200

Main Rotor Blade Grip Bearing Set

Spare part suitable for:
OMPHOBBY M2

OMPHOBBY M2 EVO MK2 Landing Skids set # OSHM2355 5,99 €

Tue, 07 Jul 2026 20:58:56 +0200

Landing Skids set

Spare part suitable for:
OMPHOBBY M2 EVO / M2 EVO MK2

Mikado VBar Control Radio / LOGO200 Case Faux Leather # 05483 99,00 €

Tue, 07 Jul 2026 08:23:15 +0200

Case Faux Leather for all VBar Control Transmitter and Logo 200

*** helicopter and radio are not included ***

ToolkitRC M4AC XT60 LiPo 1-4S 2.5A Charger AC 34,90 €

Wed, 22 Jul 2026 16:31:48 +0200

Product information "M4AC XT60 LiPo 1-4S 2.5A Charger AC"

The M4AC offers outstanding performance in an extremely handy format. Thanks to the IPS color display, all important information such as the voltage, current or charge status is clearly displayed. The built-in 32-bit ARM processor also provides the necessary energy to charge lithium batteries reliably and quickly.

Features:

25W AC charging power and maximum 2.5A charging current
Compact design - ideal for traveling
High-contrast LCD color display
Up to 66% more powerful than comparable sized chargers
32-bit ARM processor

Technical Specifications:

Input Voltage:	AC 100-240V, max. 30W
Charging Current:	0.5-2.5A, 25W
Charging Accuracy	<0.005V
Balancing Current:	max. 200mA, 2-4S
Cells: LiPo/LiFe/LiHV/LiPo Storage	1-4S
Display:	LCD, IPS 1.54'' 240x240px
Dimensions:	75x54x30mm
Weight	120g

Delivery

1x M4AC Charger
1x Power cable
1x Manual