Live-Hobby.de/Helicopter/OMPHOBBY/OMPHOBBY M1 products

OMPHOBBY Heli M1 V3 PRO Aurora-Green BNF # OSHM0064 269,00 €

Thu, 30 Jul 2026 10:00:20 +0200

OMPHOBBY M1 V3 PRO - Defy Gravity

In 2019, OMPHOBBY revolutionized the RC helicopter world with the first direct drive 3D helicopter, the M2 V1. This technology evolved throughout the M2 line and later redefined the 100-size class with the M1 series, ultimately paving the way for the hugely successful M2 V3 PRO. After its earth-shattering success, it became clear that the M1 line deserved the same treatment - and that “good”, or even “amazing” wouldn’t cut it for the monumental legacy this helicopter would carry. It had to be perfect.

We invite you to follow us into the next chapter of ultra-micro helicopter technology, built on the shoulders of the tiny giants that came before. OMPHOBBY is incredibly proud to announce the new absolute benchmark in 100-size helicopter technology:

This is OMPHOBBY M1 V3 PRO!

Lightweight breakthrough redefines
Class 100 power benchmark.

Purpose-built, ultra-light 100-size micro helicopter for every skill level, from beginner to 3D expert, with 20-30% longer flight times, more power and more control authority.

112g flying weight (including built-in ExpressLRS receiver) and 297mm rotor diameter produce the lightest disk loading and most mature flight feel in-class.

OFS3+ Core Flight Control System

Controlled by OFS3+ with integrated ExpressLRS, reaching unparalleled levels of flight performance in a micro helicopter. Features include full telemetry support, app integration, tuning options through simplified LED setup or full PID access, firmware updates, as well as 3D, self-leveling and a fully-featured rescue mode.

Compatible with CRSF (ExpressLRS, Crossfire, Tracer), F.Port, SRXL2, DSM and S.BUS receivers.

120° Step-By-Step Lightweight Frame

Integrated lightweight aluminium alloy servo mounting frame, featuring a 120° equally spaced layaout thast balances high-strength deformation resistance with leightweight performance.
Maintains structural stability under complex flight conditions, providing a solid hardware soundation for precise contol.

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Fully redesigned airframe, based on M2 V3 design language with central main plate, servo rack, reinforcement plates and traditional skid landing gear.

The airframe of M1 V3 PRO has been completely re-engineered from the ground up to optimize weight wherever possible while retaining incredible durability and flight performance. The frame structure now closely follows the M2 V3 helicopter line, which has proven to be extremely light yet virtually bullet-proof in crashes. A central main plate forms the backbone of the frame and holds the motor, servo rack, new and improved DS2045LW V2 servos, and tail boom, while two sturdy carbon panels provide mounting points for the skids, battery, and OFS3+ flight controller. The frame features reinforcement plates in the rear, much like its bigger brothers, redirecting forces in a crash to increase the likelihood of core-components surviving. All screws on M1 V3 PRO have been carefully chosen and exclusively feature 1.3mm and 1.5mm hex heads. No more special tools required, no compromises, you only need two standard size hex drivers to service the entire helicopter.

Precision at your fingertips
With a new bearing-enhanced rotor system.

As a first in its size class, M1 V3 PRO has a main rotor head built with axial bearings. This measure extends the service life of the blade grip bearings greatly, while offering smoother, more precise control of your blade angles, and therefore, rotor thrust and cyclic torques. Together with a new, more agile rotor geometry, as well as the new APEX 125 rotor blades, this new, black anodized and bead blasted rotor head is ready to propel and guide the M1 V3 PRO through even the hardest 3D flights. At the same time, it allows for incredibly precise and fine control at lower RPMs. Featuring a new rotor geometry optimized for OFS3, M1 V3 PRO allows for more control power than ever before.

R23X-2
High-Efficiency Brushless Motor

The all-new R23X-2 main motor is designed to handle sudden high loads in 3D flying. It offers an exceptional power-to-weight ratio and efficiency, delivering explosive thrust while extending flight time during aggressive maneuvers.

Ultra-Lightweight Tail System

A super-light tail comprising a round carbon tube with a minimalist motor mount and color-matched, double-sided printed tail fin provides top-level durability.

Optimized R11X-2 motor and keyed APEX27 tail propeller deliver stronger thrust with lower noise levels, which together with OFS3+’s 2nd generation TALY, surpass collective-pitch level tail control.
The tail boom is now made from a hollow carbon fiber tube, increasing durability and reducing weight. The minimalist tail motor mount guarantees crisp and fast yaw response, while serving as a heat-sink for the new R11X-2 tail motor. This motor drives the new APEX 27 tail propeller, which substantially increases tail rotor performance, while reducing noise and improving visibility compared to the previous M1 tail propeller. The propeller hub and tail motor shaft are now rotationally and directionally keyed, so that the risks of tail propeller slippage and reverse-installation are eliminated. The look is finished off by a double-sided printed carbon fiber tail fin, color-matched to the canopy.

2S HV LiPo Battery

Powered by a new 2S 400mAh 50C LiHV battery with gold-plated, high-current GY15 3-pin connector.
(Charging cable included, connectors sold separately)

All of this is powered by our new 2S 400mAh 50C LiHV battery, equipped with a brand-new, high power, gold plated GY15 3-pin connector, purpose-built for high-power applications like 3D helicopter flight. Featuring both a smaller footprint and a higher current rating than the previous JST-XH connector, it is built to last and will guarantee a low-resistance connection across countless mating cycles and flights. Connectors are available separately, and a charging cable is included in the box.

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.

Newly designed, extremely sleek, aerodynamic and durable canopy to match other OMPHOBBY models. Available in four paint schemes: Cosmic Orange, Solar Yellow, Nebula Pink, Aurora Green.

Dual-Size Option Covers All Models

Only two screw driver sizes are required to service the entire helicopter, 1.3mm and 1.5mm hex. All proprietary or exotic screw heads have been eliminated.

Technical data:

Flight Controller: OFS3+

Receiver: Integrated ExpressLRS receiver. 3 Ports for external receivers
SBUS: S-FHSS (Futaba)
DSMx: Spektrum DSMx/DSM2
CRSF: Crossfire/SRXL2/Frsky

Main motor: Sunnysky R23X-2

Tail motor: Sunnysky R11X-2

Main blade length: 297 mm

Main rotor blades: APEX 125

Tail blade length: 46.5 mm

Tail rotor blades: APEX 27

Weight: ~112g

Battery: 2s 400mAh 50C LiHV (1 battery included)

Servos: DS2045LW V2 Digital sub micro, metal gears, poly carbonate case

Package Contents::

OMPHOBBY M1 V3 PRO Heli (with built-in ExpressLRS receiver)
Sturdy Transport Box
1x HV LiPo Battery 2s 400mAh 50C
1x Bluetooth Modul
Servo Arm / Spare Screws
Battery Charging adapter cable for XT60
Live-Hobby German Manual and Programming Overview

Still needed:

Transmitter min. 6 CH
Receiver with S-Bus (Graupner, Jeti, Futaba, FRSKY uvm.), Spektrum DSMX Satellit, F.PORT or SRXL2 (Not needed for ELRS transmitters)
LiPo Charger

This model helicopter is not suitable for children under 14 years!

OMPHOBBY Heli M1 V3 PRO Nebula-Pink BNF # OSHM0063 269,00 €

Thu, 30 Jul 2026 13:03:53 +0200

OMPHOBBY M1 V3 PRO - Defy Gravity

Lightweight breakthrough redefines
Class 100 power benchmark.

OFS3+ Core Flight Control System

120° Step-By-Step Lightweight Frame

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Fully redesigned airframe, based on M2 V3 design language with central main plate, servo rack, reinforcement plates and traditional skid landing gear.

Precision at your fingertips
With a new bearing-enhanced rotor system.

Ultra-Lightweight Tail System

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.

Newly designed, extremely sleek, aerodynamic and durable canopy to match other OMPHOBBY models. Available in four paint schemes: Cosmic Orange, Solar Yellow, Nebula Pink, Aurora Green.

Dual-Size Option Covers All Models

Only two screw driver sizes are required to service the entire helicopter, 1.3mm and 1.5mm hex. All proprietary or exotic screw heads have been eliminated.

Technical data:

Flight Controller: OFS3+

Receiver: Integrated ExpressLRS receiver. 3 Ports for external receivers
SBUS: S-FHSS (Futaba)
DSMx: Spektrum DSMx/DSM2
CRSF: Crossfire/SRXL2/Frsky

Main motor: Sunnysky R23X-2

Tail motor: Sunnysky R11X-2

Main blade length: 297 mm

Main rotor blades: APEX 125

Tail blade length: 46.5 mm

Tail rotor blades: APEX 27

Weight: ~112g

Battery: 2s 400mAh 50C LiHV (1 battery included)

Servos: DS2045LW V2 Digital sub micro, metal gears, poly carbonate case

Package Contents::

OMPHOBBY M1 V3 PRO Heli (with built-in ExpressLRS receiver)
Sturdy Transport Box
1x HV LiPo Battery 2s 400mAh 50C
1x Bluetooth Modul
Servo Arm / Spare Screws

Battery Charging adapter cable for XT60
Live-Hobby German Manual and Programming Overview

Still needed:

Transmitter min. 6 CH
Receiver with S-Bus (Graupner, Jeti, Futaba, FRSKY uvm.), Spektrum DSMX Satellit, F.PORT or SRXL2 (Not needed for ELRS transmitters)
LiPo Charger

This model helicopter is not suitable for children under 14 years!

OMPHOBBY Heli M1 V3 PRO Solar-Yellow BNF # OSHM0062 269,00 €

Wed, 29 Jul 2026 20:41:05 +0200

OMPHOBBY M1 V3 PRO - Defy Gravity

Lightweight breakthrough redefines
Class 100 power benchmark.

OFS3+ Core Flight Control System

120° Step-By-Step Lightweight Frame

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Fully redesigned airframe, based on M2 V3 design language with central main plate, servo rack, reinforcement plates and traditional skid landing gear.

Precision at your fingertips
With a new bearing-enhanced rotor system.

Ultra-Lightweight Tail System

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.

Newly designed, extremely sleek, aerodynamic and durable canopy to match other OMPHOBBY models. Available in four paint schemes: Cosmic Orange, Solar Yellow, Nebula Pink, Aurora Green.

Dual-Size Option Covers All Models

Only two screw driver sizes are required to service the entire helicopter, 1.3mm and 1.5mm hex. All proprietary or exotic screw heads have been eliminated.

Technical data:

Flight Controller: OFS3+

Receiver: Integrated ExpressLRS receiver. 3 Ports for external receivers
SBUS: S-FHSS (Futaba)
DSMx: Spektrum DSMx/DSM2
CRSF: Crossfire/SRXL2/Frsky

Main motor: Sunnysky R23X-2

Tail motor: Sunnysky R11X-2

Main blade length: 297 mm

Main rotor blades: APEX 125

Tail blade length: 46.5 mm

Tail rotor blades: APEX 27

Weight: ~112g

Battery: 2s 400mAh 50C LiHV (1 battery included)

Servos: DS2045LW V2 Digital sub micro, metal gears, poly carbonate case

Package Contents::

OMPHOBBY M1 V3 PRO Heli (with built-in ExpressLRS receiver)
Sturdy Transport Box
1x HV LiPo Battery 2s 400mAh 50C
1x Bluetooth Modul
Servo Arm / Spare Screws
Battery Charging adapter cable for XT60
Live-Hobby German Manual and Programming Overview

Still needed:

Transmitter min. 6 CH
Receiver with S-Bus (Graupner, Jeti, Futaba, FRSKY uvm.), Spektrum DSMX Satellit, F.PORT or SRXL2 (Not needed for ELRS transmitters)
LiPo Charger

This model helicopter is not suitable for children under 14 years!

OMPHOBBY Heli M1 V3 PRO Cosmic-Orange BNF # OSHM0061 269,00 €

Thu, 30 Jul 2026 10:00:26 +0200

OMPHOBBY M1 V3 PRO - Defy Gravity

Lightweight breakthrough redefines
Class 100 power benchmark.

OFS3+ Core Flight Control System

120° Step-By-Step Lightweight Frame

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Fully redesigned airframe, based on M2 V3 design language with central main plate, servo rack, reinforcement plates and traditional skid landing gear.

Precision at your fingertips
With a new bearing-enhanced rotor system.

Ultra-Lightweight Tail System

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.

Newly designed, extremely sleek, aerodynamic and durable canopy to match other OMPHOBBY models. Available in four paint schemes: Cosmic Orange, Solar Yellow, Nebula Pink, Aurora Green.

Dual-Size Option Covers All Models

Only two screw driver sizes are required to service the entire helicopter, 1.3mm and 1.5mm hex. All proprietary or exotic screw heads have been eliminated.

Technical data:

Flight Controller: OFS3+

Receiver: Integrated ExpressLRS receiver. 3 Ports for external receivers
SBUS: S-FHSS (Futaba)
DSMx: Spektrum DSMx/DSM2
CRSF: Crossfire/SRXL2/Frsky

Main motor: Sunnysky R23X-2

Tail motor: Sunnysky R11X-2

Main blade length: 297 mm

Main rotor blades: APEX 125

Tail blade length: 46.5 mm

Tail rotor blades: APEX 27

Weight: ~112g

Battery: 2s 400mAh 50C LiHV (1 battery included)

Servos: DS2045LW V2 Digital sub micro, metal gears, poly carbonate case

Package Contents::

OMPHOBBY M1 V3 PRO Heli (with built-in ExpressLRS receiver)
Sturdy Transport Box
1x HV LiPo Battery 2s 400mAh 50C
1x Bluetooth Modul
Servo Arm / Spare Screws
Battery Charging adapter cable for XT60
Live-Hobby German Manual and Programming Overview

Still needed:

Transmitter min. 6 CH
Receiver with S-Bus (Graupner, Jeti, Futaba, FRSKY uvm.), Spektrum DSMX Satellit, F.PORT or SRXL2 (Not needed for ELRS transmitters)
LiPo Charger

This model helicopter is not suitable for children under 14 years!

OMPHOBBY OMP Heli M1 V1 2025 Helicopter yellow (S-FHSS RX) # OSHM0054 199,00 €

Sat, 31 Jan 2026 19:29:13 +0100

The M1 V1 was OMPHOBBY's entry into the 100-size helicopter market – and now it can be your entry into this fascinating world! We're bringing back the simple yet robust micro helicopter with its elegant injection-molded frame – as an affordable alternative to the top-of-the-line M1 EVO. Featuring the same power and control systems, the M1 V1 offers virtually the same flight performance as its high-end counterpart – without breaking the bank.

With a new, brighter, and more visible canopy design in orange and yellow, the M1 V1 now perfectly matches the look of other OMPHOBBY models. The updated, larger R11-2 tail motor generates more torque and achieves higher RPMs. Combined with a new form factor and cooling system, this ensures a cool and powerful tail rotor system – in any flying situation!

With a new, brighter, and more visible canopy design in orange and yellow, the M1 V1 now visually blends in perfectly with other OMPHOBBY models. All M1 V1 helicopters now come equipped with a Futaba S-FHSS compatible receiver and S-Bus/DSMX connection. This convenient upgrade gives you complete control over rotor speeds and pitch angles, allowing you to fine-tune the model to your exact specifications – without any limitations. The flight controller is also pre-configured with our recommended setup for improved and more stable flight right out of the box!

The flybarless system allows you to use other S-Bus compatible receivers and DSMX satellites in addition to the built-in receiver. This means you can use virtually any radio control system.

For example: Graupner, Jeti, Futaba, FrSky, and many more, or Spektrum DSMX.

The flight performance and stability make the OMPHOBBY M1 a true all-around helicopter. It excels in 3D flight as well as in general aerobatics. The switchable horizontal stabilization provides added confidence and safety.

Technical data:

Main engine: SunnySky R23-2
Rear motor: SunnySky R11-2
Main rotor diameter: 290 mm
Tail rotor diameter: 46.5mm
Flying weight: approx. 118 g
Dimensions: 290 mm x 88 mm x 54 mm
Flight control with receiver connection for S.BUS, DSM, DSMX receivers
Built-in Futaba compatible S-FHSS receiver
Flight time: Maximum flight time 9 minutes, 4 minutes for extreme 3D
High-performance servo: with metal gear / plastic housing
Battery: Lipo 2S 11.1V 350mAh - 400mAh 50C (XH)

Characteristics:

Dual Brushless Direct Drive
High-performance 3D flight characteristics
Ideal for beginners to professionals
Precise and stable control
Quiet
Aluminum rotor head and swashplate

Integrated, brushless dual controller, flight controller and (Futaba compatible S-FHSS receiver)
The two controllers have been improved with high-quality MOSFETs with lower internal resistance, which further improves the flight characteristics.
S-Bus receivers and DSM/X satellites can be connected. (Receivers and satellites are not included.) This makes it compatible with Graupner, Jeti, Spektrum, FRSKY, and many more.
The Fybarless system has a switchable horizontal stabilization (which can also be used as a rescue)
Adjustable flight controller parameters (gyro sensitivity, rate, servo center position, and collective) can be set directly on the flybarless system.
A PC or mobile phone is not required.
Servos with metal gears

Content:

OMPHOBBY M1 EVO Heli (with built-in Futaba S-FHSS compatible receiver)
Sturdy transport box
Replacement servo arms
Screwdriver 1mm hexagon
1x LiPo battery 2s 350mAh
Charging cable XT60
Live-Hobby German manual and programming overview

Still required:

Transmitter min. 6 channels
(Receiver with S-Bus output (Graupner, Jeti, Futaba, FRSKY and many more) or Spektrum DSMX satellite)
LiPo charger

This model helicopter is not suitable for children under 14 years!

OMPHOBBY OMP Heli M1 V1 2025 Helicopter orange (S-FHSS RX) # OSHM0053 199,00 €

Sat, 31 Jan 2026 19:28:53 +0100

Technical data:

Main engine: SunnySky R23-2
Rear motor: SunnySky R11-2
Main rotor diameter: 290 mm
Tail rotor diameter: 46.5mm
Flying weight: approx. 118 g
Dimensions: 290 mm x 88 mm x 54 mm
Flight control with receiver connection for S.BUS, DSM, DSMX receivers
Built-in Futaba compatible S-FHSS receiver
Flight time: Maximum flight time 9 minutes, 4 minutes for extreme 3D
High-performance servo: with metal gear / plastic housing
Battery: Lipo 2S 11.1V 350mAh - 400mAh 50C (XH)

Characteristics:

Dual Brushless Direct Drive
High-performance 3D flight characteristics
Ideal for beginners to professionals
Precise and stable control
Quiet
Aluminum rotor head and swashplate

Integrated, brushless dual controller, flight controller and (Futaba compatible S-FHSS receiver)
The two controllers have been improved with high-quality MOSFETs with lower internal resistance, which further improves the flight characteristics.
S-Bus receivers and DSM/X satellites can be connected. (Receivers and satellites are not included.) This makes it compatible with Graupner, Jeti, Spektrum, FRSKY, and many more.
The Fybarless system has a switchable horizontal stabilization (which can also be used as a rescue)
Adjustable flight controller parameters (gyro sensitivity, rate, servo center position, and collective) can be set directly on the flybarless system.
A PC or mobile phone is not required.
Servos with metal gears

Content:

OMPHOBBY M1 EVO Heli (with built-in Futaba S-FHSS compatible receiver)
Sturdy transport box
Replacement servo arms
Screwdriver 1mm hexagon
1x LiPo battery 2s 350mAh
Charging cable XT60
Live-Hobby German manual and programming overview

Still required:

Transmitter min. 6 channels
(Receiver with S-Bus output (Graupner, Jeti, Futaba, FRSKY and many more) or Spektrum DSMX satellite)
LiPo charger

This model helicopter is not suitable for children under 14 years!

Live-Hobby.de/Helicopter/OMPHOBBY/OMPHOBBY M1 products

OMPHOBBY Heli M1 V3 PRO Aurora-Green BNF # OSHM0064 269,00 €

OMPHOBBY M1 V3 PRO - Defy Gravity

Lightweight breakthrough redefinesClass 100 power benchmark.

OFS3+ Core Flight Control System

120° Step-By-Step Lightweight Frame

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Precision at your fingertipsWith a new bearing-enhanced rotor system.

R23X-2High-Efficiency Brushless Motor

Ultra-Lightweight Tail System

2S HV LiPo Battery

Fully aerodynamicStreamlined Canopoy with a wind-cutting arc.

Dual-Size Option Covers All Models

Technical data:

OMPHOBBY Heli M1 V3 PRO Nebula-Pink BNF # OSHM0063 269,00 €

OMPHOBBY M1 V3 PRO - Defy Gravity

Lightweight breakthrough redefinesClass 100 power benchmark.

OFS3+ Core Flight Control System

120° Step-By-Step Lightweight Frame

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Precision at your fingertipsWith a new bearing-enhanced rotor system.

R23X-2High-Efficiency Brushless Motor

Ultra-Lightweight Tail System

2S HV LiPo Battery

Fully aerodynamicStreamlined Canopoy with a wind-cutting arc.

Dual-Size Option Covers All Models

Technical data:

OMPHOBBY Heli M1 V3 PRO Solar-Yellow BNF # OSHM0062 269,00 €

OMPHOBBY M1 V3 PRO - Defy Gravity

Lightweight breakthrough redefinesClass 100 power benchmark.

OFS3+ Core Flight Control System

120° Step-By-Step Lightweight Frame

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Precision at your fingertipsWith a new bearing-enhanced rotor system.

R23X-2High-Efficiency Brushless Motor

Ultra-Lightweight Tail System

2S HV LiPo Battery

Fully aerodynamicStreamlined Canopoy with a wind-cutting arc.

Dual-Size Option Covers All Models

Technical data:

OMPHOBBY Heli M1 V3 PRO Cosmic-Orange BNF # OSHM0061 269,00 €

OMPHOBBY M1 V3 PRO - Defy Gravity

Lightweight breakthrough redefinesClass 100 power benchmark.

OFS3+ Core Flight Control System

120° Step-By-Step Lightweight Frame

Lightweight yet rigid, with a fully reinforced and redesigned fuselage.

Precision at your fingertipsWith a new bearing-enhanced rotor system.

R23X-2High-Efficiency Brushless Motor

Ultra-Lightweight Tail System

2S HV LiPo Battery

Fully aerodynamicStreamlined Canopoy with a wind-cutting arc.

Dual-Size Option Covers All Models

Technical data:

OMPHOBBY OMP Heli M1 V1 2025 Helicopter yellow (S-FHSS RX) # OSHM0054 199,00 €

OMPHOBBY OMP Heli M1 V1 2025 Helicopter orange (S-FHSS RX) # OSHM0053 199,00 €

Lightweight breakthrough redefines
Class 100 power benchmark.

Precision at your fingertips
With a new bearing-enhanced rotor system.

R23X-2
High-Efficiency Brushless Motor

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.

Lightweight breakthrough redefines
Class 100 power benchmark.

Precision at your fingertips
With a new bearing-enhanced rotor system.

R23X-2
High-Efficiency Brushless Motor

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.

Lightweight breakthrough redefines
Class 100 power benchmark.

Precision at your fingertips
With a new bearing-enhanced rotor system.

R23X-2
High-Efficiency Brushless Motor

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.

Lightweight breakthrough redefines
Class 100 power benchmark.

Precision at your fingertips
With a new bearing-enhanced rotor system.

R23X-2
High-Efficiency Brushless Motor

Fully aerodynamic
Streamlined Canopoy with a wind-cutting arc.