Live-Hobby.de/Manufacturer/Mikado products

Mikado Cover cap for 5,5mm gold connector, red # 05084 9,90 €

Wed, 24 Jun 2026 08:53:01 +0200

Cover cap for 5,5mm gold connector, red

Spare part suitable for:
Mikado

Mikado VBar RX-Only 7 channel receiver # 05560 69,00 €

Tue, 30 Jun 2026 08:54:13 +0200

VBar RX-Only, 7 channel receiver.

Not upgradeable (can not be updated to Pro/Pro+Rescue, can not be used with gyro sensors).

Product data:

Dimensions:	42 x 25.6 x 12 mm / 1,65 x 1,01 x 0,47 in
Weight:	13 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, Spektrum, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- VStabi RX-Only, 7-Kanal Receiver
- Printed Manual (Quick-Start-Guide)

Mikado Cover cap for 5,5mm gold connector, neon-yellow # 05083 9,90 €

Wed, 24 Jun 2026 08:53:22 +0200

Cover cap for 5,5mm gold connector, neon-yellow

Spare part suitable for:
Mikado

Mikado LOGO 200 Speed Controler # 05431 125,00 €

Tue, 30 Jun 2026 08:50:48 +0200

Speed Controler

Spare part suitable for:
Mikado LOGO 200

Mikado VBar Control Radio Case Faux Leather # 05482 79,00 €

Tue, 30 Jun 2026 08:53:03 +0200

Radio Case Faux Leather for all VBar Control Transmitter

*** radio are not included ***

Mikado Cover cap for 5,5mm gold connector, black # 05085 9,90 €

Wed, 24 Jun 2026 08:53:41 +0200

Cover cap for 5,5mm gold connector, black

Spare part suitable for:
Mikado

Mikado VBar Control Pocket bag black # 04927 69,00 €

Thu, 16 Jul 2026 13:28:21 +0200

Pocket bag black

Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

Mikado VLink S.BUS Telemetry Receiver for Micro Helis # 05680 69,00 €

Thu, 09 Jul 2026 11:57:57 +0200

small, lightweight S.BUS compatible receiver, weighs only 4.2 g

allows operation of micro helis with VBar Control

full telemetry-support with OMPHOBBY OFS3 (e.g. M1/M2V3)

antenna diversity

VBasic/RX Only-Firmware, fully functional

online updatable

Indoor Receiver for use on small models like micro helis, park flyers, typically not a full range receiver

Product data:

Dimensions:	32 x 18 x 5 mm
Weight:	4,2 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- Mikado VLink S.BUS Telemetry Receiver
- Printed Manual (Quick-Start-Guide)

Mikado VBar Control Touch with VStabi EVO VLink Combo black/yellow # 05586 749,00 €

Mon, 15 Jun 2026 12:03:48 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black/green # 05587 749,00 €

Sun, 19 Jul 2026 20:11:02 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black/red # 05585 749,00 €

Thu, 30 Jul 2026 08:41:27 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black # 05559 699,00 €

Sun, 19 Jul 2026 14:37:05 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado LOGO 800 XXTREME Motor Scorpion HK 5035-380 # 04590 259,00 €

Thu, 02 Jul 2026 10:38:35 +0200

Motor Scorpion HK 5035-380

Spare part suitable for:
Mikado LOGO 800 XXTREME

Mikado VBar RX-Only 6 channel receiver # 05599 69,00 €

Mon, 01 Jun 2026 11:17:55 +0200

VBar RX-Only, 6 channel receiver.

Not upgradeable (can not be updated to Pro/Pro+Rescue, can not be used with gyro sensors).

Product data:

Dimensions:	34 x 24 x 9 mm
Weight:	7 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, Spektrum, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- VStabi RX-Only, 6-Kanal Receiver
- Printed Manual (Quick-Start-Guide)

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Mikado LOGO 200 RTF Vcontrol Basic Case Combo orange/blue # 05591 749,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

Mikado Logo 200 Heli Set – The perfect start for helicopter enthusiasts!

Experience the pure joy of flying with the Mikado Logo 200 Heli in a complete set: including a high-quality transmitter and a practical transport case. Thanks to the Pro Rescue rescue function, you always have a reassuring safety net for your flight maneuvers.

Already tied, flown in and ready for use – unpack and take off straight away!

Perfect for professionals and ambitious beginners who value precision and comfort.

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

This LOGO 200 does not support other radio systems than VBar Control, without further adjustments.
At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.
You then obviously also need a suitable separate third party receiver.
Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.
If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case
Transmitter	VControl Basic

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 RTF Vcontrol Basic Case Combo neon-yellow/blue # 05589 749,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case
Transmitter	VControl Basic

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 RTF Vcontrol Basic Case Combo yellow/orange # 05593 749,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case
Transmitter	VControl Basic

This model helicopter is not suitable for children under 14 years!

Mikado VBar Control Radio / LOGO200 Case Faux Leather # 05483 99,00 €

Tue, 07 Jul 2026 08:23:15 +0200

Case Faux Leather for all VBar Control Transmitter and Logo 200

*** helicopter and radio are not included ***

Mikado Gyro Tape for VBar Silverline sensor # 4613 3,90 €

Sun, 26 Jul 2026 14:29:21 +0200

Gyro Tape for VBar "Silverline" sensor

Double-side pressure-sensitive, suitable for mounting equipment quickly, simply and vibration-damping.

Dimensions (LxBxH): 100x50x1,2 mm