Live-Hobby.de/Accessories/RC Electronics/Transmitter & Receiver/Mikado products

Mikado VBar Control Pocket bag black # 04927 69,00 €

Thu, 16 Jul 2026 13:28:21 +0200

Pocket bag black

Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

Mikado VLink S.BUS Telemetry Receiver for Micro Helis # 05680 69,00 €

Thu, 09 Jul 2026 11:57:57 +0200

small, lightweight S.BUS compatible receiver, weighs only 4.2 g

allows operation of micro helis with VBar Control

full telemetry-support with OMPHOBBY OFS3 (e.g. M1/M2V3)

antenna diversity

VBasic/RX Only-Firmware, fully functional

online updatable

Indoor Receiver for use on small models like micro helis, park flyers, typically not a full range receiver

Product data:

Dimensions:	32 x 18 x 5 mm
Weight:	4,2 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- Mikado VLink S.BUS Telemetry Receiver
- Printed Manual (Quick-Start-Guide)

Mikado VBar Control Touch with VStabi EVO VLink Combo black/yellow # 05586 749,00 €

Mon, 15 Jun 2026 12:03:48 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black/green # 05587 749,00 €

Sun, 19 Jul 2026 20:11:02 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black/red # 05585 749,00 €

Thu, 30 Jul 2026 08:41:27 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar Control Touch with VStabi EVO VLink Combo black # 05559 699,00 €

Sun, 19 Jul 2026 14:37:05 +0200

Mikado VBar Control Touch Radio Set with VStabi EVO VLink

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)—Apps for Android™ and iOS™ are under development, will be relaeased later on.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Content:
* VBar Control Touch
* VStabi EVO VLink

Mikado VBar RX-Only 6 channel receiver # 05599 69,00 €

Mon, 01 Jun 2026 11:17:55 +0200

VBar RX-Only, 6 channel receiver.

Not upgradeable (can not be updated to Pro/Pro+Rescue, can not be used with gyro sensors).

Product data:

Dimensions:	34 x 24 x 9 mm
Weight:	7 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, Spektrum, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- VStabi RX-Only, 6-Kanal Receiver
- Printed Manual (Quick-Start-Guide)

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Mikado VBar Control Radio / LOGO200 Case Faux Leather # 05483 99,00 €

Tue, 07 Jul 2026 08:23:15 +0200

Case Faux Leather for all VBar Control Transmitter and Logo 200

*** helicopter and radio are not included ***

Mikado Gyro Tape for VBar Silverline sensor # 4613 3,90 €

Sun, 26 Jul 2026 14:29:21 +0200

Gyro Tape for VBar "Silverline" sensor

Double-side pressure-sensitive, suitable for mounting equipment quickly, simply and vibration-damping.

Dimensions (LxBxH): 100x50x1,2 mm

Mikado Backup Mini 3x25F VBar Control # 05588 99,00 €

Wed, 24 Jun 2026 14:32:54 +0200

Mikado Backup Mini 25F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 25F
20+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 25F
Dimensions	approx. 28 x 55 x 19 mm (H x W x D)
Weight	approx. 33 g including wires
Power Rating	20+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Backup Mini with power wire, manual
Telemetry wire included

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Mon, 15 Jun 2026 12:08:22 +0200

Mikado Power Backup 50F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 50F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Mikado VStabi EVO VLink 7.x Express Alu-case orange # 05571 279,00 €

Wed, 11 Mar 2026 00:16:36 +0100

VBar EVO Highlights

New processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest available computing power on the market to this date
Innovative step-up/step-down voltage supply from 2 V up to 16 V at full power with high efficiency (less excess heat)
Full telemetry and range down to 2 V supply voltage
Improved high frequency technology for high power and sensitivity
Double sensor system using tried and tested technology and new sensors

The hardware allows for new specs:
Frame rates adjustable up to 1 kHz (1 ms) on the swash plate and 0.5 ms on the tail
ESC frame rate up to 1 KHz
Pulse width selecable between 1.5 ms down to 125 µS as well as digital high speed protocols
Improved algorithms: adjusted tot he new frame rates, new optimized digital filtering
Dynamic swash plate rotation (per bank)
New „Tail Torque Extension“ for motor driven tails, more control when the tail rotor is unloaded

Mikado VStabi EVO VLink 7.x Express neon-yellow # 05582 279,00 €

Thu, 30 Jul 2026 03:19:17 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case purple # 05570 279,00 €

Sun, 26 Jul 2026 17:12:12 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case brown # 05573 279,00 €

Wed, 11 Mar 2026 00:16:35 +0100

VBar EVO Highlights

Mikado VBar Control EVO+ sand # 05626 1.349,00 €

Fri, 17 Jul 2026 16:11:19 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production
Latest technology ARM Cortex M7 with large caches and low power consumption
Graphics processor (GPU)
Internal flash disk 4 GB (Touch: 128 MB)
Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
USB data transfers 10 times faster
Improved Touch Display
USB-C fast charging with 15 W with any off-the-shelf USB-C charger
Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Mikado VStabi EVO VLink 7.x Express Alu-case black # 05568 279,00 €

Sun, 12 Jul 2026 23:16:52 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case gold # 05574 279,00 €

Mon, 27 Jul 2026 18:59:38 +0200

VBar EVO Highlights

Mikado VBar Control EVO+ iron grey # 05627 1.349,00 €

Mon, 15 Jun 2026 12:07:05 +0200

NEW: Fully digital gimbals

Tough yet lightweight design
High precision readout with 8 parameters per axis
3D sensor sampling (3 Hall sensors per axis)
Fully integrated in VBar Control EVO software
all-digital signal path, drift-free
virtually latency-free
supreme resolution
perfectly linear
temperature compensation per sensor
earth magnetic field compensation
super sensitive throughout the whole stick range
factory calibrated
adjustable stick response from smooth to extremely fast
Made in Germany

VBar Control EVO Highlights

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
Readily understandable graphic user interface.
Easy programming for new models via the familiar VBar setup wizard.
ESC setup wizard for programming all types of speed controllers.
ESCs with VBar Control support can be programmed directly from the radio.
Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
Bank switching with three banks (fourth Bank Autorotation optional).
Real time logging and real time graphic vibration analysis available on display.
Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
Create your own screendesign directly on the touchscreen display.
Full manual available on the radio by means of context sensitive help.
Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
Automatic power-on, if an already bound model is switched on.
Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
Wireless buddy boxing with two VBar Control radios, fully configurable.
Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
Access our App Store and do over-the-air online-updates via WiFi*.
Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
Very good readability even in bright sunlight.
WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
Very fast start-up time, from off to fully operational in three seconds.
High perfomance low power controller for best user experience and long runtimes.
Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
Unlimited model memory.
Virtually unlimited number of control channels.
High range, low latency, antenna diversity both on transmitter and receiver.
Intelligent antenna monitoring and management.
Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
Precision gimbals with four ball bearings, fully adjustable.
Collective stick can be equipped with optional throw limiter.
Delicate rubber lining for comfortable, slip-free and safe holding.
Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
Large 2 Watt loudspeaker for alarms and voice output.
Vibration alarm (adjustable).
Memory accessible as a USB memory stick, no drivers needed.
Built-in Lithium Polymer battery allows for long run times.
Charge through USB connector or built-in charger.
Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.