Live-Hobby.de/Accessories/RC Electronics/Transmitter & Receiver/Telemetry/Mikado products

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Mikado Backup Mini 3x25F VBar Control # 05588 99,00 €

Wed, 24 Jun 2026 14:32:54 +0200

Mikado Backup Mini 25F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 25F
20+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 25F
Dimensions	approx. 28 x 55 x 19 mm (H x W x D)
Weight	approx. 33 g including wires
Power Rating	20+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Backup Mini with power wire, manual
Telemetry wire included

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Mon, 15 Jun 2026 12:08:22 +0200

Mikado Power Backup 50F

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 50F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

Kontronik Telemetry cable JST (Mikado) # 09704 6,90 €

Sun, 05 Jul 2026 16:21:18 +0200

Telemetry connection cable Kontronik (Kolibri) to Mikado V-Stabi Neo

Mikado VBar Control Current / Voltage / Capacity Sensor 40A # 05492 59,00 €

Fri, 03 Jul 2026 07:59:27 +0200

Current/Voltage/Capacitysensor for VBar Control

Hardware Features of the Current/Voltage/Capacity Sensor for flight packs

* Plug & play version with XT30 connectors and sensor wire, perfect fit for LOGO 200
* No influence from motor or current carrying wires
* Sensor wire attached

Software Features

* Direct displaying from voltage and capacity
* Max. current and min. voltage storage
* Logfile data from the flight
* Battery Logbook with names
* Adjustable capacity, residual capacity and voltage for each battery
* Residual capacity is shown as bar in the radio display
* Overdischarge Warning
* Warning at use of not fully charged batteries
* Loud speaker announcement for reducing battery capacity

Notes

* Requires a VBar with Spektrum Satellite connectors (telemetry bus for VBar Control)
* extracted capacities are not added up, measurement only on a per-flight basis

Specifications
Current Consumption	6 mA
Working Temperature Range	0 to 45 °C, 32 to 113 °F
Dimensions	approx. 32 x 12 x 12 mm
Power Rating	40 A
Effective Range (current)	0.1 A to 40 A
Effective Range (voltage)	5 V to 25 V (2s to 6s LiPo)
Resolution	0.01 A / 0.01 V
Contents
Device	Voltage/Current Sensor with XT30 connectors to battery and ESC
Connecting Wire	Sensor wire (attached)
Accessories


Battery ID Reader	04907
Battery ID Tags (10 pc.)	04908
Miscellaneous
Miscellaneous	Extensive software support via VBar Control App

Mikado VBar Control ESC-Cable, 250mm # 05494 9,50 €

Sun, 26 Jul 2026 12:18:37 +0200

Scorpion/Hobbywing ESC-Cable, 250mm

Spare part suitable for:
Mikado VBar Control

YGE LVT / HVT Vstabi Adapter # LVT-Vstabi-Adapter 12,90 €

Tue, 28 Jul 2026 17:26:25 +0200

Adapter for using the LVT / HVT-controller with Vbar-telemetry
RPM-Output connection for using the vbar-governor
Length about 10cm

Hobbywing VBAR Connection wire for Platinum 50cm # HW30810001 9,90 €

Thu, 23 Jul 2026 10:50:57 +0200

Hobbywing VBAR Connection wire for Platinum 50cm

With the update of the Platinum ESC v4/4.1/5 from Hobbywing, Mikado's remote control systems are now also supported.

This cable is used to connect a VBar NEO with the corresponding controller.

Thanks to the additionally installed socket, the fan connection is still available.

Cable length: approx. 50cm.

Mikado VBar Control ESC-Cable, 500mm # 05089 9,50 €

Fri, 03 Jul 2026 13:03:50 +0200

Scorpion/Hobbywing

ESC-Cable, 500mm

Spare part suitable for:
Mikado VBar Control

Mikado VBar Control Airspeed/Altitude Sensor black # 05388 119,00 €

Mon, 01 Dec 2025 09:38:50 +0100

Airspeed/Altitude Sensor black

Combined speed sensor with variometer. Measuring range: 30-300 km/h

Mikado VBar Control Airspeed/Altitude Sensor white # 05385 119,00 €

Mon, 01 Dec 2025 09:38:50 +0100

Airspeed/Altitude Sensor white

Combined speed sensor with variometer. Measuring range: 30-300 km/h

Mikado Pressure hose connector 90° offset # 05389 11,90 €

Wed, 18 Feb 2026 22:28:34 +0100

Pressure hose connector 90° offset for Mikado Airspeed/Altitude Sensor

Mikado VBar Control ESC-Cable, 350mm # 05088 9,50 €

Mon, 20 Jul 2026 18:43:31 +0200

Scorpion/Hobbywing ESC-Cable, 350mm

Spare part suitable for:
Mikado VBar Control

Mikado VBar Control Battery ID Sensor # 04907 59,00 €

Mon, 08 Jun 2026 15:18:51 +0200

Battery ID Sensor

Prerequisite
A VBar or Mini VBar with RX 1/RX 2 ports, a VBar Control Voltage/Current Sensor and Battery ID Tags are required.

Application
Using the Battery ID Reader, VBar Control can automatically and individually identify your flight packs. It is no longer necessary to select the flight packs manually from the list in the Battery Logbook. This simplifies pre-flight handling significantly, and it rules out a potential source of trouble by mistakenly selecting a wrong battery. Each battery will be tagged using a Battery ID Tag (sticker) which identifies the battery uniquely. The reader will be installed in your model.

Specifications
Current Consumption	10 mA average, max. 80 mA
Working Temperature Range	-5 to 40 °C, 23 to 104 °F
Dimensions	72 x 36 x 8 mm
Weight	14 g
Range	max. 30 mm
Contents
Device	Battery ID Reader
Connecting Wire	Sensor wire 500 mm
Battery ID Tags	5 Tags
Accessories
Connecting Wire 250 mm	04898
Connecting Wire 500 mm	04899
Voltage/Current Sensor	04890
Battery ID Tags (10 pc.)	04908
Miscellaneous
Miscellaneous	Extensive software support via VBar Control App

Mikado VBar Control Simulator adaptor wire set # 04910 17,70 €

Fri, 12 Sep 2025 16:40:40 +0200

Simulator adaptor wire set

With this Wire Set you can use any existing VBar main unit or Mini VBar as well as the dedicated VBar Control Simulator Interface as a wireless simulator interface for your favorite simulator.

Live-Hobby.de/Accessories/RC Electronics/Transmitter & Receiver/Telemetry/Mikado products

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Benefits at a glance

Hardware features

Mikado Backup Mini 3x25F VBar Control # 05588 99,00 €

Benefits at a glance

Hardware features

Mikado Power Backup 3x50F VBar Control # 05584 99,00 €

Benefits at a glance

Hardware features

Kontronik Telemetry cable JST (Mikado) # 09704 6,90 €

Mikado VBar Control Current / Voltage / Capacity Sensor 40A # 05492 59,00 €

Current/Voltage/Capacitysensor for VBar Control

Specifications

Contents

Accessories

Miscellaneous

Mikado VBar Control ESC-Cable, 250mm # 05494 9,50 €

Scorpion/Hobbywing ESC-Cable, 250mm

YGE LVT / HVT Vstabi Adapter # LVT-Vstabi-Adapter 12,90 €

Hobbywing VBAR Connection wire for Platinum 50cm # HW30810001 9,90 €

Hobbywing VBAR Connection wire for Platinum 50cm

Mikado VBar Control ESC-Cable, 500mm # 05089 9,50 €

Scorpion/Hobbywing

ESC-Cable, 500mm

Mikado VBar Control Airspeed/Altitude Sensor black # 05388 119,00 €

Mikado VBar Control Airspeed/Altitude Sensor white # 05385 119,00 €

Mikado Pressure hose connector 90° offset # 05389 11,90 €

Mikado VBar Control ESC-Cable, 350mm # 05088 9,50 €

Scorpion/Hobbywing ESC-Cable, 350mm

Mikado VBar Control Battery ID Sensor # 04907 59,00 €

Battery ID Sensor

Specifications

Contents

Accessories

Miscellaneous

Mikado VBar Control Simulator adaptor wire set # 04910 17,70 €

Simulator adaptor wire set

Mikado VBar Control Battery ID tags # 04908 19,90 €

Battery ID tags

Mikado VBar Control Temperature Sensor (-300°C) # 05058 33,90 €

VBar Control Temperature Sensor (-300°C)