Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Mikado/LOGO 800 Spare Parts products

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

AS150 7mm Connector system 5x set for Battery 17,90 €

Wed, 29 Jul 2026 11:20:29 +0200

AS150 7mm connector set on battery side

Content:

5x 7mm plug and housing black (battery side)
5x 7mm socket and housing red (battery side)

AS150 7mm Connector system 5x set for ESC 17,90 €

Thu, 23 Jul 2026 08:14:11 +0200

AS150 7mm connector set on ESC side

Content:

5x 7mm plug and housing red without anti spark(ESC side)
5x 7mm socket and housing black (ESC side)

AS150 7mm Connector system with anti spark 5x Set 38,90 €

Tue, 28 Jul 2026 21:42:46 +0200

The AS150 connector system is designed with 7mm Ø for a load capacity of 150A permanently and 200A temporarily and thus covers a wide range of applications.

The plug on the ESC side is equipped with an integrated anti-flash and prevents sparking when the flight battery is connected.

They can be used for one battery as well as for batteries connected in series without the need for an adapter.

The plastic housings of the AS150 connector system are screwed onto the plugs and sockets, which makes them easy to install and reuse.

The AS150 connector system is recommended for models from the 500 size upwards.

Content:
5x 7mm plug with anti-flash and housing red (ESC on the side)
5x 7mm socket and housing black (ESC side)
5x 7mm plug and housing black (battery side)
5x 7mm socket and housing red (battery side)

NEXSPOR Servo Arm Reinforced 25T 5,9mm # VSH-25T-4S 11,90 €

Wed, 29 Jul 2026 15:31:20 +0200

Reinforced plastic servo arm set with 25T toothing

Suitable for mini and standard servos / 35 - 40mm Servos with Ø5,9mm 25T toothing:

- Futaba Servos
- Savöx Servos
- Align Servos
- BK Servos
- Outrage Servos
- MKS Servos
- KST Servos
- Nexspor Servos

The ideal servo arm for SAB Goblin 500 - 770, OXY 5, Soxos 550-800, Align T-REX 500 - 800 and many more ...

Content:

4x NEXSPOR Servo Arm Reinforced 25T 5,9mm

AS150 7mm Connector system set for ESC 3,80 €

Tue, 21 Jul 2026 09:29:15 +0200

AS150 7mm connector set on ESC side

Content:

1x 7mm plug and housing red without anti spark (ESC side)
1x 7mm socket and housing black (ESC side)

AS150 7mm Connector system with anti spark 1 Set 8,90 €

Thu, 30 Jul 2026 07:44:34 +0200

The AS150 connector system is designed with 7mm Ø for a load capacity of 150A permanently and 200A temporarily and thus covers a wide range of applications.

The plug on the ESC side is equipped with an integrated anti-flash and prevents sparking when the flight battery is connected.

They can be used for one battery as well as for batteries connected in series without the need for an adapter.

The plastic housings of the AS150 connector system are screwed onto the plugs and sockets, which makes them easy to install and reuse.

The AS150 connector system is recommended for models from the 500 size upwards.

Content:
1x 7mm plug with anti-flash and housing red (ESC on the side)
1x 7mm socket and housing black (ESC side)
1x 7mm plug and housing black (battery side)
1x 7mm socket and housing red (battery side)

AS150 7mm Connector system set for Battery 3,80 €

Wed, 29 Jul 2026 09:27:47 +0200

AS150 7mm connector set on battery side

Content:

1x 7mm plug and housing black (battery side)
1x 7mm socket and housing red (battery side)

Align T-REX 800 Carbon Fiber Blades # HD800A 185,99 €

Fri, 24 Jul 2026 22:45:42 +0200

Shape: Symmetrical wing
Length:800x70x8.8mm
Width:14mm
Shaft Diameter:5mm
Weight:Approx 445g/set

Spare part suitable for:
Align T-REX 800

Mikado LOGO 700 / 800 XXTREME Tail rotor blade holder # 04583 11,90 €

Wed, 11 Mar 2026 00:16:11 +0100

Tail rotor blade holder

Spare part suitable for:
Mikado LOGO 700 / 800 XXTREME

Mikado LOGO 700 Coupling for torque tube # 05037 9,35 €

Thu, 02 Jul 2026 11:03:11 +0200

Coupling for torque tube

Spare part suitable for:
Mikado LOGO 700

Mikado LOGO 800 XXTREME Horizontal Fin # 04562 5,95 €

Thu, 02 Jul 2026 11:03:11 +0200

Horizontal Fin

Spare part suitable for:
Mikado LOGO 800 XXTREME

Mikado LOGO 700 / 800 XXTREME Ball bearing 6x13x5 # 04521 6,20 €

Wed, 11 Mar 2026 00:16:10 +0100

Ball bearing 6x13x5

Spare part suitable for:
Mikado LOGO 700 / 800 XXTREME

Mikado LOGO 700 Mounting block for bevel/belt gear # 05020 14,50 €

Wed, 11 Mar 2026 00:16:10 +0100

Mounting block for bevel/belt gear

Spare part suitable for:
Mikado LOGO 700

Mikado LOGO 550 / 600 / 690 / 700 Metal hex bolts # 04099 4,90 €

Sun, 28 Jun 2026 18:04:38 +0200

Metal hex bolts

Spare part suitable for:
Mikado LOGO 550 SX / 550 SE / 600 SX / 600 SE / 690 SX / 700

Mikado LOGO 700 Upper sideframe right # 05015 36,00 €

Wed, 11 Mar 2026 00:16:10 +0100

Upper sideframe right

Spare part suitable for:
Mikado LOGO 700

Mikado LOGO 700 Upper sideframe left # 05016 18,00 €

Thu, 02 Jul 2026 11:03:11 +0200

Upper sideframe left

Spare part suitable for:
Mikado LOGO 700

Mikado LOGO 700 Main Gear cover # 05082 21,25 €

Thu, 02 Jul 2026 11:03:11 +0200

Main Gear cover

Spare part suitable for:
Mikado LOGO 700

Mikado LOGO 700 / 800 XXTREME Radius arm swashplate driver # 04509 6,90 €

Wed, 11 Mar 2026 00:16:10 +0100

Radius arm swashplate driver

Spare part suitable for:
Mikado LOGO 700 / 800 XXTREME