Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Mikado/LOGO 600 SX Spare Parts products

3x THETA RAZOR-DH1 Low-Profile Brushless HV Servo SET with NFC BLUE 323,90 €

Mon, 13 Jul 2026 12:34:47 +0200

THETA RAZOR-DH1 Low-Profile Brushless HV Servo with NFC - blue version

NFC programmable brushless HV servo in the 40 mm low-profile size.
The application range of the servo is versatile from helicopter swashplate servo from the 550 up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC cars.
Due to the SANWA SSR compatibility, the advantages of Sanwa Super Response transmission can be used in the RC car sector.

Specifications:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,090 (secS/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	24 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,092 (sec/60°)
Speed at 6V	0,081 (sec/60°)
Speed at 7,4V	0,072 (sec/60°)
Speed at 8,4V	0,063 (sec/60°)

Torque at 5V	30 (kg/cm)
Torque at 6V	34 (kg/cm)
Torque at 7,4V	37 (kg/cm)
Torque at 8,4V	40 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-DH1 blue
with accessories

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Sat, 25 Jul 2026 17:00:34 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

ManiaX LiPo 6S 4400mAh 22.2V eXpert 45C 79,90 €

Mon, 13 Jul 2026 01:33:59 +0200

The ManiaX Power LiPo Batteries are characterized by:

- More number of cycles with less wear
- High charge rate
- High voltage under full load
- Constant voltage level
- Power until the end of the flight
- Low internal resistance
- Low heating even under full load
- Top performance / discharge rate / weight ratio

Technical specifications:
- Voltage: 22,2V
- Capacity: 4400mAh
- Discharge rate: 45C (198A)
- Discharge rate Peak: 90C (396A)
- Charging current: 1-3C Max 5C
- Dimensions H*W*L : 46*48*158mm
- Weight: ca. 740g
- Balancer connector: XH
- Discharge cable length: 12cm
- Discharge cable: 10AWG
- Discharge connector: XT90

Mikado Power Backup MAX VBar Control # 05600 109,00 €

Wed, 15 Jul 2026 01:30:55 +0200

Mikado Power Backup MAX

Benefits at a glance

automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
all voltages can be monitored separately via telemetry
charging currents are adjustable, both for initial charging and for topping-up during operation
recharges automatically and immediately whenever needed
companion App warns the pilot whenever the backup is used
this unit ensures the everyday operation of your valuable models

Hardware features

wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
Capacity 3x 110F
40+ A peak current
short circuit protection
fast charge (adjustable) up to 2.4 A
charging current is ramped up slowly, to protect main power supply
decoupled channels for power delivery and for charging
VLink Telemetry monitoring and control
no r/c channel (servo connector) must be sacrificed, pass-through via main connector
active balancer between capacitors for low idle discharge
up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
telemetry input for other sensors or ESCs (daisy-chaining)

Specifications
Power Supply	3-12.6 V (3s LiPo), max. 16 V, 50F
Dimensions	approx. 66 x 55 x 19 mm (H x W x D)
Weight	approx. 69 g including wires
Power Rating	40+ A peak

Device
Connecting Wire
Miscellaneous
Miscellaneous	Update VBar NEO, install companion App on transmitter

Contents
VBar Control Power Backup w/ power wire, manual
Telemetry wire included

THETA KENNY KO EDITION HV SERVO SET 3S 12V Brushless 3x THL787H 1x THL782H 519,90 €

Thu, 23 Jul 2026 14:51:57 +0200

THETA KENNY KO EDITION HV SERVO SET 3S 12V Brushless 3x THL787H 1x THL782H

This is a box set, which includes 3 THL787H cyclic servos and a THL782H tail servo. The servos were optimized in collaboration with multiple time world champion, Kenny Ko.

High Voltage 3S 12V
High Speed
Excellent Centering
Compatible with Futaba type horns/arms
Light Weight

The area of application of the servo set is for helicopters from the 550 to the 800+ size.

Specifications THL787H swashplate servo:


Motor	Brushless
Operating Voltage	7,5V bis 12,6V

Speed at 7,5V	0,09 (sec/60°)
Speed at 9,0V	0,08 (sec/60°)
Speed at 11,1V	0,07 (sec/60°)
Speed at 12,6V	0,06 (sec/60°)

Torque at 7,5V	24 (kg/cm)
Torque at 9,0V	28 (kg/cm)
Torque at 11,1V	33 (kg/cm)
Torque at 12,6V	38 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	1520µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications THL782H Tailservo:


Motor	Brushless
Operating Voltage	7,5V bis 12,6V

Speed at 7,5V	0,065 (sec/60°)
Speed at 9,0V	0,057 (sec/60°)
Speed at 11,1V	0,050 (sec/60°)
Speed at 12,6V	0,045 (sec/60°)

Torque at 7,5V	12 (kg/cm)
Torque at 9,0V	14 (kg/cm)
Torque at 11,1V	17 (kg/cm)
Torque at 12,6V	19 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	760µs
Maximale Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo THL787H
1x Servo THL782H

1st Main Blades CFK 600mm FBL (red) # 1stB600-R 82,90 €

Sun, 19 Jul 2026 23:35:57 +0200

1st Main Blades CFK 600mm FBL

Technical specifications:
blade length: 600mm
blade admission: 12mm
borehole: 4mm
Weight per blade: approx. 125g
max. rpm: 2800
blade width / depth: 55mm
profile: Fully symmetrical
direction of rotation: clockwise
number of blade: 2

1st Main Blades CFK 600mm FBL (green) # 1stB600-G 82,90 €

Fri, 24 Apr 2026 07:11:50 +0200

1st Main Blades CFK 600mm FBL

THETA RAZOR HELI F3C 760µs Servo Set with NFC 579,90 €

Wed, 11 Mar 2026 00:16:30 +0100

THETA Helicopter Set 3x RAZOR-C1 F3C 760µs for swashplate and the RAZOR-T1 F3C 760µs for tail / Brushless HV Servo with NFC

The Heli F3C set is optimized to get the full power out of flybarless systems, which can also deliver a center pulse of 760µs for the swashplate, such as the Futaba CGY760R.

Please make sure that your flybarless system supports this. The servos cannot be operated with a standard center pulse of 1520µs when delivered.

NFC programmable brushless HV servo in the 40 mm standard size.

The field of application of the servo set is for helicopters from 550 to 800+ size.

Specifications RAZOR-C1 F3C swashplate servo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2,6A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,084 (sec/60°)
Speed at 7,4V	0,071 (sec/60°)
Speed at 8,4V	0,060 (sec/60°)

Torque at 5V	23 (kg/cm)
Torque at 6V	27 (kg/cm)
Torque at 7,4V	34 (kg/cm)
Torque at 8,4V	36 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,102 (sec/60°)
Speed at 6V	0,079 (sec/60°)
Speed at 7,4V	0,067 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	32 (kg/cm)
Torque at 6V	37 (kg/cm)
Torque at 7,4V	44 (kg/cm)
Torque at 8,4V	48 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications RAZOR-T1 F3C Tailservo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,062 (sec/60°)
Speed at 6V	0,054 (sec/60°)
Speed at 7,4V	0,047 (sec/60°)
Speed at 8,4V	0,042 (sec/60°)

Torque at 5V	17 (kg/cm)
Torque at 6V	18 (kg/cm)
Torque at 7,4V	19 (kg/cm)
Torque at 8,4V	20 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,058 (sec/60°)
Speed at 6V	0,051 (sec/60°)
Speed at 7,4V	0,044 (sec/60°)
Speed at 8,4V	0,039 (sec/60°)

Torque at 5V	20 (kg/cm)
Torque at 6V	24 (kg/cm)
Torque at 7,4V	27 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo RAZOR-C1 F3C
1x Servo RAZOR-T1 F3C

THETA THL398 Plastic Case Brushless HV Servo 84,90 €

Fri, 29 May 2026 10:50:26 +0200

THETA THL398 Brushless HV Servo

Programmable brushless HV servo in the 40 mm standard size.
The application range of the servo is versatile from helicopter swashplate servo from the 550 size up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC Cars.

Specifications:


Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,130 (sec/60°)
Speed at 6V	0,120 (sec/60°)
Speed at 7,4V	0,110 (sec/60°)
Speed at 8,4V	0,100 (sec/60°)

Torque at 5V	20 (kg/cm)
Torque at 6V	23 (kg/cm)
Torque at 7,4V	27 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	65g
Dimensions (mm)	40x20x38,7mm
Neutral pulse (factory-made)	1520µs

Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo THETA THL398
2x Servo horn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA RAZOR Low-Profile HELI SET 3x D1 / 1x DT1 Brushless HV Servo with NFC 449,90 €

Thu, 23 Jul 2026 14:53:04 +0200

THETA Heli Low-Profile Set 3x RAZOR-D1 for swashplate and the RAZOR-DT1 for tail / Brushless HV Servo with NFC

NFC programmable brushless HV servo in the 40 mm low-profile size.

The application range of the servo set is versatile from helicopter swashplate from the 550 up to the 800 size.

Specifications RAZOR D1 Low-Profile swashplate servo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,090 (sec/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	12 (kg/cm)
Torque at 6V	13,5 (kg/cm)
Torque at 7,4V	15 (kg/cm)
Torque at 8,4V	16 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,092 (S/60°)
Speed at 6V	0,081 (S/60°)
Speed at 7,4V	0,072(S/60°)
Speed at 8,4V	0,063 (S/60°)

Torque at 5V	14 (kg/cm)
Torque at 6V	15,5 (kg/cm)
Torque at 7,4V	18 (kg/cm)
Torque at 8,4V	20 (kg/cm)

Weight	53g
Dimensions (mm)	41x20,5x27mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	333Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications RAZOR DT1 Low-Profile tail servo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,087 (sec/60°)
Speed at 6V	0,072 (sec/60°)
Speed at 7,4V	0,064 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	10 (kg/cm)
Torque at 6V	11 (kg/cm)
Torque at 7,4V	12 (kg/cm)
Torque at 8,4V	13 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,079 (sec/60°)
Speed at 6V	0,065 (sec/60°)
Speed at 7,4V	0,058 (sec/60°)
Speed at 8,4V	0,051 (sec/60°)

Torque at 5V	12 (kg/cm)
Torque at 6V	13.5 (kg/cm)
Torque at 7,4V	15 (kg/cm)
Torque at 8,4V	16 (kg/cm)

Weight	53g
Dimensions (mm)	41x20,5x27mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo RAZOR-D1

1x Servo RAZOR-DT1

THETA KENNY KO EDITION HV SERVO SET Brushless 3x THL788 1x THL782 499,90 €

Mon, 27 Jul 2026 11:35:29 +0200

THETA KENNY KO EDITION HV SERVO SET Brushless 3x THL788 1x THL782

This is a box set, which includes 3 THL788 cyclic servos and a THL782 tail servo. The servos were optimized in collaboration with multiple time world champion, Kenny Ko.

High Voltage
High Speed
Excellent Centering
Compatible with Futaba type horns/arms
Light Weight

The area of application of the servo set is for helicopters from the 550 to the 800+ size.

Specifications THL788 swashplate servo:


Motor	Brushless
Operating Voltage	5V bis 8,4V

Speed at 5V	0,11 (sec/60°)
Speed at 6V	0,10 (sec/60°)
Speed at 7,4V	0,09 (sec/60°)
Speed at 8,4V	0,08 (sec/60°)

Torque at 5V	20 (kg/cm)
Torque at 6V	23 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	32 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	1520µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications THL782 Tailservo:


Motor	Brushless
Operating Voltage	5V bis 8,4V

Speed at 5V	0,065 (sec/60°)
Speed at 6V	0,057 (sec/60°)
Speed at 7,4V	0,050 (sec/60°)
Speed at 8,4V	0,045 (sec/60°)

Torque at 5V	10 (kg/cm)
Torque at 6V	12 (kg/cm)
Torque at 7,4V	14 (kg/cm)
Torque at 8,4V	16 (kg/cm)

Weight	75g
Dimensions (mm)	40x20x38mm
Neutral pulse	760µs
Maximale Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo THL788
1x Servo THL782

THETA RAZOR-T1 Black Brushless HV Servo with NFC 139,90 €

Tue, 28 Jul 2026 00:45:05 +0200

THETA RAZOR-T1 Black Brushless HV Servo with NFC

NFC programmable brushless HV servo in the 40 mm standard size.
The application range of the servo is versatile from helicopter tail rotor servo from the 550 size up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC Cars.
Due to the SANWA SSR compatibility, the advantages of Sanwa Super Response transmission can be used in the RC car sector.

Specifications:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,062 (sec/60°)
Speed at 6V	0,054 (sec/60°)
Speed at 7,4V	0,047 (sec/60°)
Speed at 8,4V	0,042 (sec/60°)

Torque at 5V	17 (kg/cm)
Torque at 6V	18 (kg/cm)
Torque at 7,4V	19 (kg/cm)
Torque at 8,4V	20 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,058 (sec/60°)
Speed at 6V	0,051 (sec/60°)
Speed at 7,4V	0,044 (sec/60°)
Speed at 8,4V	0,039 (sec/60°)

Torque at 5V	20 (kg/cm)
Torque at 6V	24 (kg/cm)
Torque at 7,4V	27 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-T1 Black
3x Servo horn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo
1x Capacitor

THETA RAZOR-T1 Brushless HV Servo with NFC 139,90 €

Thu, 23 Jul 2026 14:57:47 +0200

THETA RAZOR-T1 Brushless HV Servo with NFC

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,062 (sec/60°)
Speed at 6V	0,054 (sec/60°)
Speed at 7,4V	0,047 (sec/60°)
Speed at 8,4V	0,042 (sec/60°)

Torque at 5V	17 (kg/cm)
Torque at 6V	18 (kg/cm)
Torque at 7,4V	19 (kg/cm)
Torque at 8,4V	20 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,058 (sec/60°)
Speed at 6V	0,051 (sec/60°)
Speed at 7,4V	0,044 (sec/60°)
Speed at 8,4V	0,039 (sec/60°)

Torque at 5V	20 (kg/cm)
Torque at 6V	24 (kg/cm)
Torque at 7,4V	27 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-T1
3x Servo horn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo
1x Capacitor

THETA RAZOR-TH1 Low-Profile Brushless HV Servo with NFC 119,90 €

Thu, 23 Jul 2026 14:57:09 +0200

THETA RAZOR-TH1 Low-Profile Brushless HV Servo with NFC

NFC programmable brushless HV servo in the 40 mm low-profile size.
The application range of the servo is versatile from helicopter tail rotor servo from the 550 size up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC Cars.
Due to the SANWA SSR compatibility, the advantages of Sanwa Super Response transmission can be used in the RC car sector.

Specifications:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,087 (sec/60°)
Speed at 6V	0,072 (sec/60°)
Speed at 7,4V	0,064 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	19 (kg/cm)
Torque at 6V	21 (kg/cm)
Torque at 7,4V	23 (kg/cm)
Torque at 8,4V	24 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,079 (sec/60°)
Speed at 6V	0,065 (sec/60°)
Speed at 7,4V	0,058 (sec/60°)
Speed at 8,4V	0,051 (sec/60°)

Torque at 5V	22 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-TH1
3x Servo horn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo
1x Capacitor

THETA RAZOR-C1 Black Brushless HV Servo with NFC 139,90 €

Tue, 28 Jul 2026 00:45:05 +0200

THETA RAZOR-C1 Black Brushless HV Servo with NFC

NFC programmable brushless HV servo in the 40 mm standard size.
The application range of the servo is versatile from helicopter swashplate servo from the 550 size up to the 800 size, as a throttle servo, rudder servo in shipbuilding, large aircraft and in a variety of different RC Cars.
Due to the SANWA SSR compatibility, the advantages of Sanwa Super Response transmission can be used in the RC Car range.

Specifications:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,084 (sec/60°)
Speed at 7,4V	0,071 (sec/60°)
Speed at 8,4V	0,060 (sec/60°)

Torque at 5V	23 (kg/cm)
Torque at 6V	27 (kg/cm)
Torque at 7,4V	34 (kg/cm)
Torque at 8,4V	36 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,102 (sec/60°)
Speed at 6V	0,079 (sec/60°)
Speed at 7,4V	0,067 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	32 (kg/cm)
Torque at 6V	37 (kg/cm)
Torque at 7,4V	44 (kg/cm)
Torque at 8,4V	48 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-400Mz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-C1 Black
3x Servo horn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA RAZOR-C1 Brushless HV Servo with NFC 139,90 €

Thu, 23 Jul 2026 14:57:22 +0200

THETA RAZOR-C1 Brushless HV Servo with NFC

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2,6A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,084 (sec/60°)
Speed at 7,4V	0,071 (sec/60°)
Speed at 8,4V	0,060 (sec/60°)

Torque at 5V	23 (kg/cm)
Torque at 6V	27 (kg/cm)
Torque at 7,4V	34 (kg/cm)
Torque at 8,4V	36 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,102 (sec/60°)
Speed at 6V	0,079 (sec/60°)
Speed at 7,4V	0,067 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	32 (kg/cm)
Torque at 6V	37 (kg/cm)
Torque at 7,4V	44 (kg/cm)
Torque at 8,4V	48 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-C1
3x Servo horn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA RAZOR-DH1 Low-Profile Brushless HV Servo with NFC 119,90 €

Thu, 23 Jul 2026 14:56:56 +0200

THETA RAZOR-DH1 Low-Profile Brushless HV Servo with NFC

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,090 (secS/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	24 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,092 (sec/60°)
Speed at 6V	0,081 (sec/60°)
Speed at 7,4V	0,072 (sec/60°)
Speed at 8,4V	0,063 (sec/60°)

Torque at 5V	30 (kg/cm)
Torque at 6V	34 (kg/cm)
Torque at 7,4V	37 (kg/cm)
Torque at 8,4V	40 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
1x Servo RAZOR-DH1
3x Servo horn
1x Screw M3
4x Rubber damper
4x Brass grommet
4x Tapping screw for servo

THETA RAZOR HELI SET 3x C1 / 1x T1 Black Brushless HV Servo with NFC 529,90 €

Tue, 28 Jul 2026 00:37:00 +0200

THETA Helicopter Set 3x RAZOR-C1 for swashplate and the RAZOR-T1 for tail / Brushless HV Servo with NFC

NFC programmable brushless HV servo in the 40 mm standard size.

The field of application of the servo set is for helicopters from 550 to 800+ size.

Specifications RAZOR-C1 swashplate servo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2,6A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,084 (sec/60°)
Speed at 7,4V	0,071 (sec/60°)
Speed at 8,4V	0,060 (sec/60°)

Torque at 5V	23 (kg/cm)
Torque at 6V	27 (kg/cm)
Torque at 7,4V	34 (kg/cm)
Torque at 8,4V	36 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,102 (sec/60°)
Speed at 6V	0,079 (sec/60°)
Speed at 7,4V	0,067 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	32 (kg/cm)
Torque at 6V	37 (kg/cm)
Torque at 7,4V	44 (kg/cm)
Torque at 8,4V	48 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications RAZOR-T1 Tailservo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,062 (sec/60°)
Speed at 6V	0,054 (sec/60°)
Speed at 7,4V	0,047 (sec/60°)
Speed at 8,4V	0,042 (sec/60°)

Torque at 5V	17 (kg/cm)
Torque at 6V	18 (kg/cm)
Torque at 7,4V	19 (kg/cm)
Torque at 8,4V	20 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,058 (sec/60°)
Speed at 6V	0,051 (sec/60°)
Speed at 7,4V	0,044 (sec/60°)
Speed at 8,4V	0,039 (sec/60°)

Torque at 5V	20 (kg/cm)
Torque at 6V	24 (kg/cm)
Torque at 7,4V	27 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo RAZOR-C1 Black
1x Servo RAZOR-T1 Black

THETA RAZOR HELI SET 3x C1 / 1x T1 Brushless HV Servo with NFC 529,90 €

Thu, 23 Jul 2026 14:57:22 +0200

THETA Helicopter Set 3x RAZOR-C1 for swashplate and the RAZOR-T1 for tail / Brushless HV Servo with NFC

NFC programmable brushless HV servo in the 40 mm standard size.

The field of application of the servo set is for helicopters from 550 to 800+ size.

Specifications RAZOR-C1 swashplate servo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2,6A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,084 (sec/60°)
Speed at 7,4V	0,071 (sec/60°)
Speed at 8,4V	0,060 (sec/60°)

Torque at 5V	23 (kg/cm)
Torque at 6V	27 (kg/cm)
Torque at 7,4V	34 (kg/cm)
Torque at 8,4V	36 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,102 (sec/60°)
Speed at 6V	0,079 (sec/60°)
Speed at 7,4V	0,067 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	32 (kg/cm)
Torque at 6V	37 (kg/cm)
Torque at 7,4V	44 (kg/cm)
Torque at 8,4V	48 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Maximale Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications RAZOR-T1 Tailservo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,062 (sec/60°)
Speed at 6V	0,054 (sec/60°)
Speed at 7,4V	0,047 (sec/60°)
Speed at 8,4V	0,042 (sec/60°)

Torque at 5V	17 (kg/cm)
Torque at 6V	18 (kg/cm)
Torque at 7,4V	19 (kg/cm)
Torque at 8,4V	20 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,058 (sec/60°)
Speed at 6V	0,051 (sec/60°)
Speed at 7,4V	0,044 (sec/60°)
Speed at 8,4V	0,039 (sec/60°)

Torque at 5V	20 (kg/cm)
Torque at 6V	24 (kg/cm)
Torque at 7,4V	27 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	73g
Dimensions (mm)	40x20x38mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo RAZOR-C1
1x Servo RAZOR-T1

THETA RAZOR Low-Profile HELI SET 3x DH1 / 1x TH1 Brushless HV Servo with NFC 449,90 €

Thu, 23 Jul 2026 14:56:56 +0200

THETA Heli Low-Profile Set 3x RAZOR-DH1 for swashplate and the RAZOR-TH1 for tail / Brushless HV Servo with NFC

NFC programmable brushless HV servo in the 40 mm low-profile size.

The application range of the servo set is versatile from helicopter swashplate from the 550 up to the 800 size.

Specifications RAZOR DH1 Low-Profile swashplate servo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 3A current consumption
Speed at 5V	0,108 (sec/60°)
Speed at 6V	0,090 (secS/60°)
Speed at 7,4V	0,080 (sec/60°)
Speed at 8,4V	0,070 (sec/60°)

Torque at 5V	24 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,092 (sec/60°)
Speed at 6V	0,081 (sec/60°)
Speed at 7,4V	0,072 (sec/60°)
Speed at 8,4V	0,063 (sec/60°)

Torque at 5V	30 (kg/cm)
Torque at 6V	34 (kg/cm)
Torque at 7,4V	37 (kg/cm)
Torque at 8,4V	40 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	1520µs
Neutral pulse (optional per App)	760µs
Working Frequency	50-400Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Specifications RAZOR TH1 Low-Profile tail servo:

NFC programmable via Android mobile phone app
Motor	Brushless
Operating Voltage	5V bis 8,4V

with max. 2.6A current consumption
Speed at 5V	0,087 (sec/60°)
Speed at 6V	0,072 (sec/60°)
Speed at 7,4V	0,064 (sec/60°)
Speed at 8,4V	0,056 (sec/60°)

Torque at 5V	19 (kg/cm)
Torque at 6V	21 (kg/cm)
Torque at 7,4V	23 (kg/cm)
Torque at 8,4V	24 (kg/cm)

with max. 5A current consumption
Speed at 5V	0,079 (sec/60°)
Speed at 6V	0,065 (sec/60°)
Speed at 7,4V	0,058 (sec/60°)
Speed at 8,4V	0,051 (sec/60°)

Torque at 5V	22 (kg/cm)
Torque at 6V	26 (kg/cm)
Torque at 7,4V	28 (kg/cm)
Torque at 8,4V	30 (kg/cm)

Weight	60g
Dimensions (mm)	41x20,5x29,5mm
Neutral pulse (factory-made)	760µs
Neutral pulse (optional per App)	1520µs
Working Frequency	50-1000Hz
Output toothing	25T Ø 5,9mm (Nexspor, Futaba Align, BK, Savöx usw.)

Accessories:
3x Servo RAZOR-DH1

1x Servo RAZOR-TH1