Live-Hobby.de/Spare Parts/Spare Parts Helicopter/Mikado/LOGO 480 XXTREME Spare Parts products

1st Buffer-Pack 25F V4.12 for Helis 450-700 # 1st9542 51,99 €

Tue, 11 Aug 2026 19:08:58 +0200

1st Buffer-Pack 25F V4.12 for Helis 450-700

The new version of 1St Buffer has been upgraded.
You can use the buffer as usual, but switching off the buffer is now even more convenient.
In addition to the button on the buffer itself, the buffer can now also be switched off via a channel in the receiver with an assigned switch.
This is a great advantage, especially for models in which the buffer is installed inaccessible.
To do this, the buffer is connected to a free slot and a switch is assigned for this channel, which toggles it from -100 to +100.
The buffer uses its LEDs to indicate whether it is in the process of being switched off.
If it is in operation and supports the system, the red LED flashes as usual.
When charging, the green flashes.
When it is full, all LEDs light up.
After the switch is pressed, the buffer flashes red and green alternately for a short time and then switches off.
Don't worry if you use it incorrectly.
If you accidentally launched the model in the buffer from position, there is no risk.
The buffer must first be switched to the on position and then to the off position before it turns off. This minimizes the risk of switching off the buffer unintentionally. Likewise, some time passes before switching off, so that in the event of an accident, the switch can be quickly switched back to Pos on.

Overview:
- 32 bit, 48MHz MCU controlled operation
- Adaptive charging
- Current sensing
- Output for Telemetrie (3.0 Volt / 0.0 Volt)
- Controlled with an RC channel – can be mounted in a hidden position

Application:
- Backup capacitor for RC models giving safe emergency landing when RC battery or BEC fails
- Buffer surge current on high power model airplanes and helicopters
- Effective buffering of servo reverse current

Maximum ratings:
- Maximum input voltage: 13 V
- Maximum buffer voltage (output): 8.5 V
- Peak current: 25 A

Technical specifications:
- Width: 17 mm
- Length: 55 mm
- Height: 33 mm
- Weight: approx. 26 g
- CAPs: 3 x 25F
- Cable length: 25 cm
- Plug: Graupner / JR UNI
- Input voltage: 5.6 V to 13 V

SLS Quantum 3000mAh 6S1P 22,2V 30C/60C # SLSQ30006130 70,20 €

Tue, 16 Jun 2026 07:58:12 +0200

Technische Daten:

Spannung: 22,2V
Ausführung: 6S1P
Kapazität: 3000mAh
Dauerentladestrom: max. 30C (90A)
Kurzzeitiger Entladestrom: max. 60C (180A)
Ladestrom: max. 5C (15A)
Gewicht: ca. 431 Gramm (inkl. Kabel und Stecker)
Maße: ca. LxBxH 140 x 43 x 35mm
Balanceranschluss: XH
Stecksystem: XT60
Hauptstromkabel: AWG12
Hauptstromkabel-Länge: 12cm

Mikado LOGO 480 XXTREME Motor mounting plate # 04820 12,90 €

Wed, 11 Mar 2026 00:16:10 +0100

Motor mounting plate

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Pinion for herringbone gear 18 teeth, M0,5 # 04118 15,90 €

Wed, 11 Mar 2026 00:16:11 +0100

Pinion for herringbone gear 18 teeth, M0,5

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Distance bolt for tail gear box # 04832 4,90 €

Wed, 11 Mar 2026 00:16:10 +0100

Distance bolt for tail gear box

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Motorplate reinforcement # 04812 18,90 €

Wed, 11 Mar 2026 00:16:10 +0100

Motorplate reinforcement

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Upper bearing block for main rotor shaft # 04816 11,60 €

Wed, 11 Mar 2026 00:16:10 +0100

Upper bearing block for main rotor shaft

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Holder for belt pulley # 04823 13,60 €

Wed, 11 Mar 2026 00:16:10 +0100

Holder for belt pulley

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Pinion for herringbone gear 19 teeth, M0,5 # 04119 7,95 €

Thu, 02 Jul 2026 11:03:11 +0200

Pinion for herringbone gear 19 teeth, M0,5

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Pinion for herringbone gear 17 teeth, M0,5 # 04117 15,90 €

Wed, 11 Mar 2026 00:16:11 +0100

Pinion for herringbone gear 17 teeth, M0,5

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado Antenna support for tailboom, black # 04954 9,90 €

Fri, 07 Aug 2026 06:55:37 +0200

Antenna support for tailboom, black

Mikado LOGO 480 XXTREME Carbon ESC mounting platet # 04813 9,50 €

Wed, 11 Mar 2026 00:16:10 +0100

Carbon ESC mounting platet

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Carbon horinzontal fin # 04827 5,10 €

Thu, 02 Jul 2026 11:03:11 +0200

Carbon horinzontal fin

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Lower main shaft bearing block # 04818 12,60 €

Wed, 11 Mar 2026 00:16:10 +0100

Lower main shaft bearing block

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 XXTREME Clamps for carbon tailrotor Ø 20mm # 04232 5,00 €

Wed, 11 Mar 2026 00:16:10 +0100

Clamps for carbon tailrotor Ø 20mm

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 480 / 800 Alu-Screw Seat For Socket Head Screws 3mm # 04553 7,90 €

Wed, 11 Mar 2026 00:16:10 +0100

Alu-Screw Seat For Socket Head Screws 3mm

Spare part suitable for:
Mikado LOGO 480 XXTREME / 800 XXTREME

Mikado LOGO 480 XXTREME Socket head cap screw M3x30 # 01962 3,25 €

Thu, 02 Jul 2026 11:03:11 +0200

Socket head cap screw M3x30

Spare part suitable for:
Mikado LOGO 480 XXTREME

Mikado LOGO 400 / 480 / 550 / 600 / 690 Ball bearing 3x6x2,5 # 02330 3,10 €

Thu, 02 Jul 2026 11:03:11 +0200

Ball bearing 3x6x2,5

Spare part suitable for:
Mikado LOGO 400 SE / 480 XXTREME / 550 SX / 550 SE / 600 SX / 600 SE / 690 SX

Mikado Futaba/Savox Carbon Servoarm 20 mm # 04021 15,30 €

Sat, 22 Aug 2026 17:57:51 +0200

Carbon Servoarm 20 mm

Mikado LOGO 480 / 550 / 600 / 690 Alu lever holder for carbon tailrotor # 03077 17,30 €

Wed, 11 Mar 2026 00:16:11 +0100

Alu lever holder for carbon tailrotor

Spare part suitable for:
Mikado LOGO 480 XXTREME / 550 SX / 550 SE / 600 SX / 600 SE / 690 SX