Live-Hobby.de/Helicopter/Mikado/LOGO 200 products

Mikado LOGO 200 RTF Vcontrol Basic Case Combo orange/blue # 05591 749,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

Mikado Logo 200 Heli Set – The perfect start for helicopter enthusiasts!

Experience the pure joy of flying with the Mikado Logo 200 Heli in a complete set: including a high-quality transmitter and a practical transport case. Thanks to the Pro Rescue rescue function, you always have a reassuring safety net for your flight maneuvers.

Already tied, flown in and ready for use – unpack and take off straight away!

Perfect for professionals and ambitious beginners who value precision and comfort.

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

This LOGO 200 does not support other radio systems than VBar Control, without further adjustments.
At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.
You then obviously also need a suitable separate third party receiver.
Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.
If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case
Transmitter	VControl Basic

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 RTF Vcontrol Basic Case Combo neon-yellow/blue # 05589 749,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case
Transmitter	VControl Basic

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 RTF Vcontrol Basic Case Combo yellow/orange # 05593 749,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case
Transmitter	VControl Basic

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 Flight Trainer with bag # 05516 1.499,00 €

Thu, 12 Feb 2026 15:34:13 +0100

Mikado Flight Trainer helps r/c heli beginners with learning to fly. Different modes support different stages. „Guided“ Mode is the first one. The heli is guided by the system, and the pilot can safely-with much fun and little stress-get accustomed to the controls of the model, and to the view of the model in flight, no matter if tail in, sideways, nose in, and how the controls react in different orientations. The model will stop automatically when the sticks are released. No prior experience required.

In „Smartborder“ Mode, some more piloting skills are required. Here, you have a safe flight zone. The model will react more gently, but already in the same way as a free flying model helicopter. When coming close to the ground, or when reaching the upper limit of the flight zone, collective pitch will be controlled in a way so exiting the flight zone is not possible. When reaching the lateral limits of the flight zone, the model will stop, and it will return into a hovering position above it’s base automatically.

After mastering this, there’s „Free Flight“ Mode. Here, the model is reacting like a full-bred 3D helicopter. In this mode, there is still a limitation to 90° bank angle, and the flight zone is still there. This means, even now, the model can not crash. At all borders, the model will upright, slow down, and return into a hovering position above it’s base automatically.

This mode is good for more experiened beginners, too, e.g. for learing to fly nose-in, or to practice other still uncomfortable orientations.

One you feel safe controlling your LOGO 200 inside the flight zone, you can disable Trainer mode, and push your LOGO 200 through the whole 3D program. If required, Trainer mode can still take over takeoff and landing, e.g. if you want or need to land in a confined area.

The flight zone can be adjusted from 3 to 20 m (approx. 10 to 65 ft) and from 1 to 10 m altitude (approx. 3 to 33 ft). At the lower border, there’s a technical limit as well as a 1 m (3 ft) safetey zone. Close to the base, you can fly down to approx. 30 cm / 1 ft.

In all modes, the model will take off and land automatically. Of course, if you disable Trainer mode manually, you have to land manually. In all trainer modes, the model will also land automatically when the battery is empty.

Specifications Helicopter

Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 350 g / 12,35 oz
recommended batterie	650-700 mAh (1 pc. 650 mAh included)
Main gear ratio	1:1 direct drive
Tail gear ratio	Motor driven tail (direct drive)

Content

Kit	LOGO 200 Flight Trainer Edition
Accessories	Flight Trainer Landing Pad, carrying bag for your Flight Trainer and accessories, rubberization for skids, boot plug, charging cable for flight packs XT30
Manual	Printed manuals included
Motors	included/mounted
ESC	included/mounted
Radio	VBar Control Basic Flight Trainer Edition
Radio Accessories	Lanyard, charging cable USB C
VBar electronic	VStabi NEO mini Flight Trainer Edition
Servos	3 pc. mounted
Blades	1 set mounted
Tail Blades	1 pc. mounted
Canopy	1 pc. mounted

Accessories

Battery Charger

Battery charger with balancer connector for 3s LiPo batteries (not included)

Mikado LOGO 200 Flight Trainer # 05515 1.399,00 €

Fri, 13 Feb 2026 13:23:33 +0100

This mode is good for more experiened beginners, too, e.g. for learing to fly nose-in, or to practice other still uncomfortable orientations.

Specifications Helicopter

Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 350 g / 12,35 oz
recommended batterie	650-700 mAh (1 pc. 650 mAh included)
Main gear ratio	1:1 direct drive
Tail gear ratio	Motor driven tail (direct drive)

Content

Kit	LOGO 200 Flight Trainer Edition
Accessories	Flight Trainer Landing Pad, rubberization for skids, boot plug, charging cable for flight packs XT30
Manual	Printed manuals included
Motors	included/mounted
ESC	included/mounted
Radio	VBar Control Basic Flight Trainer Edition
Radio Accessories	Lanyard, charging cable USB C
VBar electronic	VStabi NEO mini Flight Trainer Edition
Servos	3 pc. mounted
Blades	1 set mounted
Tail Blades	1 pc. mounted
Canopy	1 pc. mounted

Accessories

Battery Charger

Battery charger with balancer connector for 3s LiPo batteries (not included)

Mikado LOGO 200 Super Bind&Fly yellow/orange Premium Case Combo # 05501 549,00 €

Wed, 11 Mar 2026 00:16:36 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 Bind&Fly Super Combo black/yellow # 05504 449,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 Bind&Fly Super Combo yellow/orange # 05503 449,00 €

Mon, 01 Dec 2025 09:38:50 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 Super Bind&Fly red/blue Premium Case Combo # 05496 549,00 €

Wed, 11 Mar 2026 00:16:36 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 Bind&Fly Super Combo red/blue # 05495 449,00 €

Fri, 06 Feb 2026 12:40:47 +0100

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 Bind&Fly Super Combo # 05384 449,00 €

Mon, 27 Jul 2026 14:38:59 +0200

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy

This model helicopter is not suitable for children under 14 years!

Mikado LOGO 200 Super Bind&Fly Premium Case Combo # 05474 549,00 €

Mon, 27 Jul 2026 14:38:59 +0200

LOGO 200

BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
Exceptional flight performance, comparable to larger 600-700 class helis
Equally suitable for sports flying, aerobatics and 3D flying
Wide range of head speeds, from 2,500-7000+ 1/min possible
Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
Dual Motor System, direct drive for main and tail rotor
Dual ESC with metal case
VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
incl. ** Pro Rescue rescue function **
VBar NEO already set up, no setup on your own required, just bind and fly
VBar NEO Governor with RPM telemetry
Micro digital servos with metal gears for the swashplate
Carbon frame and landing gear
Aluminum rotor head and swashplate
VTX main rotor blades
Glass Fiber Airbrush canopy

Specifications Helicopter


Rotor diameter	400 mm
Rotor blades	VTX 173
RTF weight	approx. 310 g
recommended batterie	Lipo 3S-650 mAh (included)
&Main gear ratio	1
Tail gear ratio	1
Main Gear size	./.
Length	420 mm
Hight	135 mm
Width	74 mm
Content
KIT	LOGO 200 Super Combo ARF
Motor	OMPHOBBY
ESC	OMPHOBBY
VBar electronic	VBar NEO mini VLink incl. Pro Rescue rescue function
Servos	3 x digital micro servo w/ metal gears, OMPHOBBY
Battery	OMPHOBBY 3S-650 mAh
Blades	VTX 173 mm
Tail Blades	71 mm
Canopy	Airbrush GFK-Canopy
Case	Premium Case

This model helicopter is not suitable for children under 14 years!