Live-Hobby.de/Spare Parts/Spare Parts Helicopter/GOOSKY/GOOSKY RS4 VENOM products

XLPower High-Performance Thrust Bearing Grease for RC Helicopter # XLAC-01 5,29 €

Sun, 26 Jul 2026 17:25:19 +0200

High-Performance Thrust Bearing Grease for RC Helicopter

Radiomaster ELRS RP3-H Nano Dual Receiver 25,99 €

Fri, 24 Jul 2026 11:48:14 +0200

ELRS RP3-H Nano Dual Receiver

RadioMaster RP3-H ExpressLRS 2.4 GHz Nano Receiver

Compact ExpressLRS Receiver for Flybarless Systems

The RadioMaster RP3-H ExpressLRS 2.4 GHz Nano Receiver is a powerful, ultra-lightweight RC receiver ideal for flybarless systems, as it fully supports CRSF (ELRS) and S.BUS protocols – perfect for modern flight controllers and helicopter FBL systems.

Thanks to the ExpressLRS protocol, the RP3-H offers a stable, reliable radio link with very low latency and a high update rate, ensuring precise control and telemetry.

Key Features

Plug-and-Play: Easy, solderless installation with JST-GH connectors.
CRSF (ELRS) & S.BUS Compatible: Works with most flybarless systems and flight controllers.
Antenna diversity: Two 150 mm T-antennas for improved reception stability and range.
Telemetry PA & LNA: Telemetry output up to 100 mW for strong feedback.
Integrated TCXO: Temperature-compensated oscillator for stable frequency and improved reception.
Wi-Fi firmware updates: Updates can be performed directly on the built-in receiver.

Technical Specifications

Frequency Range: 2.404 – 2.479 GHz
MCU: ESP8285
RF Chip: SX1281
Telemetry RF Power: up to 100 mW
Receive Refresh Rate: 25 Hz – 1000 Hz (500 Hz standard)
Supply Voltage: DC 4.5 – 8.4 V
Battery Telemetry Range: DC 4.0 – 35 V
Weight: approx. 5.1 g (including antennas)
Dimensions: 28 × 24 × 8 mm
Firmware: ExpressLRS v3.3.1 pre-installed
Bus Interface: CRSF / S.BUS

Package Contents:

1 × RP3-H ExpressLRS Nano Receiver
2 × 150 mm 2.4 GHz T-Antennas
Cable Set (JST-GH) CRSF Pigtail & Adapter
Telemetry Cable & Quick-Start Guide

GOOSKY RS4 Servo Set 3x DS45MG 1x DS50MG # GT020170 159,99 €

Sun, 12 Jul 2026 19:29:07 +0200

Servo Set 3x DS45MG 1x DS50MG

Goosky Cyclic Servo - DS45MG Specifications:

Operating Voltage	DC 6,0-7,4V
Speed at (6,0V)	0,077 sec/60°
Speed at (7,4V)	0,06 sec/60°
Torque at (6,0V)	6,0 kg/cm
Torque at (7,4V)	7,0 kg/cm
Neutral pulse	1520µs
Working Frequency	50 - 333Hz
Dimensions (mm)	23x12x28
Output toothing	21T Ø 5
Weight	22,6g
Connecting wire	JR

Goosky Tail servo DS50MG Specifications:

Operating Voltage	DC 6,0-7,4V
Speed at (6,0V)	0,041 sec/60°
Speed at (7,4V)	0,037 sec/60°
Torque at (6,0V)	1,6 kg/cm
Torque at (7,4V)	2,0 kg/cm
Neutral pulse	760µs
Working Frequency	50 - 560Hz
Dimensions (mm)	35x15x29,5
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx usw..)
Weight	43g
Connecting wire	JR

Set Content:

3x Goosky Cyclic Servo - DS45MG
1x Goosky Tail servo DS50MG

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY LiPo Battery 6S 22,2V 2200mAh 70C # GT020204 69,99 €

Mon, 06 Jul 2026 12:32:37 +0200

Goosky 6S 2200mAh 70C Lipo Battery

Technical details:

- Capacity: 2200mAh
- Voltage: 22.2V/6S
- Discharge Rate: 70C
- Weight: ca. 381g
- Size (H*W*L): 105x53x35mm
- Balancer connector: XH
- with XT60 Plug

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY 6S 80A Metal Co-brand ESC # GT020205 79,99 €

Mon, 06 Jul 2026 12:26:33 +0200

Goosky 6S 80A Metal Co-brand ESC

Current (cont./peak): 80A/120A
Cells: 3-8S LiPo
BEC: 5-12V @ 8A (Switch Mode) / Peak: 20A

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY 390mm Main Blades # GT020012 52,39 €

Sun, 05 Jul 2026 16:01:14 +0200

Goosky 390mm Main Blades

Technical Specifications:

Length:	390mm
Blade Grip:	>5mm
Hole:	3mm
Weight approx.:	40g
Width:	35mm
Airfoil:	Symmetric

GOOSKY RS4 / RS4 Venom Tail shaft Washer # GT020114 2,59 €

Wed, 11 Mar 2026 00:16:47 +0100

Tail shaft Washer

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY M2 Nut # GT020130 2,29 €

Sat, 18 Jul 2026 15:02:37 +0200

M2 Nut

GOOSKY Socket Screw Set - M2x4 # GT020125 2,69 €

Wed, 11 Mar 2026 00:16:47 +0100

Socket Screw Set - M2x4

GOOSKY RS4 / RS4 Venom Tail rod tie links # GT020044 10,29 €

Tue, 28 Jul 2026 14:23:39 +0200

Tail rod tie links

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY RS4 / RS4 Venom Tail blades - plastic # GT020073 6,99 €

Fri, 24 Jul 2026 16:58:51 +0200

Tail blades - plastic

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY RS4 / RS4 Venom Tail pitch slider assembly # GT020058 12,59 €

Tue, 28 Jul 2026 14:23:39 +0200

Tail pitch slider assembly

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY Socket Screw Set - M3x18-L6 # GT020129 2,69 €

Wed, 11 Mar 2026 00:16:47 +0100

Socket Screw Set - M3x18-L6

GOOSKY Socket Screw Set - M2.5x12 # GT020127 2,69 €

Wed, 11 Mar 2026 00:16:47 +0100

Socket Screw Set - M2.5x12

GOOSKY Washer Set - 8x10x0.5 # GT020132 2,29 €

Tue, 28 Jul 2026 14:23:40 +0200

Washer Set - 8x10x0.5

GOOSKY Tail servo DS50MG - separate # GT020070 89,99 €

Sun, 12 Jul 2026 19:40:05 +0200

Goosky Tail servo DS50MG

Specifications:

Operating Voltage	DC 6,0-7,4V
Speed at (6,0V)	0,041 sec/60°
Speed at (7,4V)	0,037 sec/60°
Torque at (6,0V)	1,6 kg/cm
Torque at (7,4V)	2,0 kg/cm
Neutral pulse	760µs
Working Frequency	50 - 560Hz
Dimensions (mm)	35x15x29,5
Output toothing	25T Ø 5,9mm (Futaba, Align, BK, Savöx usw..)
Weight	43g
Connecting wire	JR

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY RS4 / RS4 Venom Vertical fin Pink # GT020053 9,59 €

Tue, 28 Jul 2026 14:23:39 +0200

Vertical fin Pink

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY RS4 / RS4 Venom Tail servo bracket # GT020042 11,39 €

Wed, 03 Jun 2026 10:18:46 +0200

Tail servo bracket

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

GOOSKY Washer Set - 2.1x3.6x0.5 # GT020131 2,29 €

Tue, 28 Jul 2026 14:23:40 +0200

Washer Set - 2.1x3.6x0.5

GOOSKY RS4 / RS4 Venom Vertical fin White） # GT020051 9,59 €

Wed, 11 Mar 2026 00:16:45 +0100

Vertical fin White）

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom