Live-Hobby.de/Accessories/RC Electronics/Flybarless Systems/Flybarless - Rigid Systeme products

Spirit 3 - Flybarles and Stabilisation System 99,90 €

Wed, 29 Jul 2026 09:42:12 +0200

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

It packs native telemetry support for Futaba S.BUS2, FrSky S.PORT, F.Port and F.BUS including ELRS protocols. Without any special cables.

Real-Time Logging capability

Logging of everything - that is now possible for the first time! Until now, logging at 500Hz rate was barely possible. That is not an issue anymore. Thanks to durable Dedicated Memory Chip with long-life!

You can see how your model was flying in the air! In 3D graphics.

Pressure Sensor

Yes, it is there and fully embedded. Unparalleled precision of 1 Pascal allow extremely precise altitude measurement . With the innovative algorithms and Sensor Fusion technology the precision goes further down. It can be utilized in a various of ways such as Altitude Hold or even Automatic Rescue system.

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit 3 design was enhanced to minimize voltage drops even for a peripherals!

Simplified Wiring

Our aim is simplicity. This mean you no longer need a special cables such as FrSky Integration cable or even JETI Integration cable. It can be replaced just with normal stright one. Same as for Spirit GT.

Gold-plated PCB

We care about reliability a lot. For big scale helicopters of 800 class or more extreme current amperage can develop. With Spirit 3 connectors all losses are minimized.

Extensions

Spirit 3 can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit 3 it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

For Helicopters and Fixed Wings

Spirit 3 was designed for 250 – 800 class helicopters and medium size fixed wing models. It is perfect match for the most available R/C models.

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x27.15x13.9mm, weight: 18g
Power supply: 2 - 15V @ 50mA
Operating temperature: -10°C to 60°C
Latest generation, Ultra Fast ARM processor: 462 DMIPS
IMU MEMS sensor with 20bit precision
(rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
Integrated S-BUS Inverter
Integrated FrSky Integration cable
Setup directly from radio with common brands
2x native Spektrum connectors
3x connector for power supply, 4x for servos
Revolutionary GeoLink support (GPS, vario, logger)
Spirit Aero support (coming soon)
All-pin protection
Redundant internal powertrain for maximum safety
Excessive tolerance for brown-outs
Dedicated capacitor for peripheral voltage stability
Simplified JETI receiver wiring
Embedded Pressure sensor
Dedicated Memory Chip for Real-Time logging
Samtec Pin headers for high current transmission

Features

Super-smooth flight control
Paddle simulation with inexpressible feeling
Classic flybar mechanics support
Extreme vibration immunity for all helicopter types
Spectrum analysis for model diagnostics
Flight log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spektrum, Jeti, OpenTX and HoTT radio integration
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured rescue system
Integrated Bank Switching
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, XDFly, Graupner
Governor for Electric, Nitro and Gasser Helicopters
BEC tester with load verification
Support for PWM, PPM, S-BUS, FrSky F.Port,
Spektrum DSM2/DSMX, JETI Duplex EX Bus,
SRXL/Graupner SUMD/JETI UDI/JR X-Bus,
F.BUS, CRSF, ELRS, Spirit RX receivers
Support for all servo types:
1520/960/760us @ 50 - 700Hz
Support for CCPM 90/120/135/140°
Real-Time telemetry log
Perfect flight log with 3D visualisation
Servo extension board for 8 servos and more

Manual

Available at the Wiki pages.

Package content

Spirit 3 unit
USB interface
15cm receiver cables
10cm 3M VHB doublesided adhesive tape

Mikado VLink S.BUS Telemetry Receiver for Micro Helis # 05680 69,00 €

Thu, 09 Jul 2026 11:57:57 +0200

small, lightweight S.BUS compatible receiver, weighs only 4.2 g

allows operation of micro helis with VBar Control

full telemetry-support with OMPHOBBY OFS3 (e.g. M1/M2V3)

antenna diversity

VBasic/RX Only-Firmware, fully functional

online updatable

Indoor Receiver for use on small models like micro helis, park flyers, typically not a full range receiver

Product data:

Dimensions:	32 x 18 x 5 mm
Weight:	4,2 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- Mikado VLink S.BUS Telemetry Receiver
- Printed Manual (Quick-Start-Guide)

Spirit GTR - Flybarles and Stabilisation System with JETI Receiver 269,90 €

Sun, 05 Jul 2026 22:49:58 +0200

Spirit GTR is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ

It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit GTR consists from Spirit GT hardware and JETI Duplex receiver.

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

Real-Time Logging capability

Version 3.3 will unlock all these capabilities. For the first time in the history, you will be able to see how your model was flying in the air! In 3D graphics.

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit GTR design was enhanced to minimize voltage drops even for a peripherals!

Extensions

Spirit GTR can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit GTR it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x29.6x15.8mm, weight: 23g
Power supply: 3.2 - 10V @ 55mA
Operating temperature: -10°C to 60°C
Latest generation, Ultra Fast
32bit ARM processor: 468 DMIPS
MEMS sensor with 20bit IMU (rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
2x independent telemetry ports for JETI DUPLEX sensors
3x connector for power supply, 5x for servos
All-pin protection
Redundant internal power chain for maximum safety
Excessive tolerance for brown-outs
Embedded JETI DUPLEX 2.4 Ghz Telemetry Receiver
Precise Pressure Sensor for Altitude Measurement
RealTime Logging Feature for detailed flight recording
2x 20cm Full-range antennas
Max. output power: 15 dBm
Receiver sensitivity: -106 dBm

Features

Super-smooth flight control
Paddle simulation with inexpressible feeling
Classic flybar mechanics support
Extreme vibration immunity for all helicopter types
Spectrum analysis for model diagnostics
Flight log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Full integration and telemetry with JETI DUPLEX
Supported by all JETI DUPLEX radios
Support for all JETI DUPLEX sensors
Support for backup DUPLEX receiver
Support for JETIBOX
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner
Revolutionary GeoLink support (GPS/GNSS, vario, logger)
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured rescue system
Integrated Bank Switching
Governor for Electric, Nitro and Gasser Helicopters
BEC tester with load verification
Spirit Aero support (from 1.5.0 Aero firmware)
Support for all servo types:
1520/960/760us @ 50 - 700Hz
Support for CCPM 90/120/135/140°

Package content

Spirit GTR unit
USB interface
Bind plug
3x 3M VHB doublesided adhesive tape

Manual available at the Wiki pages.

Spirit W1 - Flybarles and Stabilisation System with Wave Receiver 269,90 €

Sun, 05 Jul 2026 20:28:51 +0200

Spirit W1 is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ

It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit W1 consists from Spirit GT hardware and Spirit Wave receiver.

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

Real-Time Logging capability

VFor the first time in the history, you will be able to see how your model was flying in the air!

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit W1 design was enhanced to minimize voltage drops even for a peripherals!

Extensions

Spirit W1 can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit W1 it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

Highlights

Control part

For Helicopters and Planes
Spirit Governor
Top-notch 20-bit IMU Sensor
Performance-line ARM F7 processor
Precise pressure sensor for Altitude measurement
Dedicated Memory Chip for detailed logging

Receiver part

Spirit Wave 2.4Ghz full-range telemetry receiver
Full featured 30+ channels available
Blazing fast 333 Hz transmission
High interference immunity
BEC Voltage measurement

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x29.6x15.8mm, weight: 23g
Power supply: 3 - 15V @ 55mA
Operating temperature: -10°C to 50°C
Latest generation, Ultra Fast
32bit ARM processor: 468 DMIPS
MEMS sensor with 20bit IMU (rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
2x independent telemetry ports for Spirit Wave sensors
3x connector for power supply, 5x for servos
All-pin protection
Redundant internal power chain for maximum safety
Excessive tolerance for brown-outs
Embedded Spirit RX 2.4 Ghz Telemetry Receiver
Precise Pressure Sensor for Altitude Measurement
RealTime Logging Feature for detailed flight recording
2x 20cm Full-range antennas
Max. output power: 30 dBm
Receiver sensitivity: -106 dBm
Third-party receiver supported – Wave receiver can be turned off
Replaceable and Detachable Antennas

Features

Super-Smooth Flight control
Paddle Simulation with inexpressible feeling
Classic Flybar Mechanics support
Extreme vibration immunity for all helicopter types
Spectrum Analysis for model diagnostics
Flight Log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spirit RX Telemetry
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner
ESC Setup (selected brands) with Spirit Wave
Revolutionary GeoLink support (GPS/GNSS, vario, logger)
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured and highly proven Rescue system
Integrated Bank Switching
Automatic Rescue Mode
Governor for Electric, Nitro and Gasser Helicopters
BEC Tester with load verification
Spirit Aero support
Support for all servo types:
1520/960/760us @ 50 - 700Hz
CCPM 90/120/135/140°, Mechanical Mix and 45° Phasing

Package content

Spirit W1 unit
USB interface (1m)
Bind plug
4x 3M VHB doublesided adhesive tape

Manual available at the Wiki pages.

Spirit W3 - Flybarles and Stabilisation System with Wave Receiver 129,90 €

Wed, 08 Jul 2026 08:21:24 +0200

Spirit W3 is brand new stabilisation system for R/C aircrafts featuring control unit and receiver in one extraordinary packageǃ

It combines the best available technologies from both worlds to offer cutting edge experience. In other words, Spirit W3 consists from Spirit 3 hardware and Spirit Wave receiver.

Manual available at the Wiki pages.

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

Real-Time Logging capability

VFor the first time in the history, you will be able to see how your model was flying in the air!

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit W3 design was enhanced to minimize voltage drops even for a peripherals!

Highlights

Control part

For Helicopters and Planes
Spirit Governor
Top-notch 20-bit IMU Sensor
Performance-line ARM F7 processor
Precise pressure sensor for Altitude measurement
Dedicated Memory Chip for detailed logging

Receiver part

Spirit Wave 2.4Ghz full-range telemetry receiver
Full featured 30+ channels available
Blazing fast 333 Hz transmission
High interference immunity
BEC Voltage measurement

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x27.15x15.8mm, weight: 23g
Power supply: 3 - 15V @ 55mA
Operating temperature: -10°C to 50°C
Latest generation, Ultra Fast
32bit ARM processor: 468 DMIPS
MEMS sensor with 20bit IMU (rotation up to 4000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
2x independent telemetry ports for Spirit Wave sensors
3x connector for power supply, 4x for servos
All-pin protection
Redundant internal power chain for maximum safety
Excessive tolerance for brown-outs
Embedded Spirit RX 2.4 Ghz Telemetry Receiver
Precise Pressure Sensor for Altitude Measurement
RealTime Logging Feature for detailed flight recording
2x 20cm Full-range antennas
Max. output power: 30 dBm
Receiver sensitivity: -106 dBm
Third-party receiver supported – Wave receiver can be turned off
Replaceable and Detachable Antennas

Package content

Spirit W3 unit
USB interface (1m)
Bind plug
4x 3M VHB doublesided adhesive tape

Warranty

2 year warranty for the original purchaser
50% discount for damage replacement of the unit

Features

Super-Smooth Flight control
Paddle Simulation with inexpressible feeling
Classic Flybar Mechanics support
Extreme vibration immunity for all helicopter types
Spectrum Analysis for model diagnostics
Flight Log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spirit RX Telemetry
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner, XDfly
ESC Setup (selected brands) with Spirit Wave
Revolutionary GeoLink support (GPS/GNSS, vario, logger)
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured and highly proven Rescue system
Integrated Bank Switching
Automatic Rescue Mode
Governor for Electric, Nitro and Gasser Helicopters
BEC Tester with load verification
Spirit Aero support
Support for all servo types:
1520/960/760us @ 50 - 700Hz
CCPM 90/120/135/140°, Mechanical Mix and 45° Phasing

Availability

Shipped within 31 - 62 days from Order Date
Order can be cancelled anytime before shipment

FCC compliance

FCC ID: 2AW4Z-SPIRITW1

Displayed prices are Tax excl. for all non-logged users.

Spirit GT - Flybarles and Stabilisation System 229,90 €

Tue, 14 Jul 2026 23:14:16 +0200

Outstanding ARM M7 processor

M7 performance-line processor is truly unbelievable! It is 3x faster than M4 and brings amazing features.

This adds free room for any possible math operation allowing to calculate anything imaginable the unit could ever need.

It packs native telemetry support for Futaba S.BUS2 and even FrSky S.PORT or brand new F.Port protocols. Without any special cables.

Real-Time Logging capability

For the first time in the history, you can see how your model was flying in the air! In 3D graphics.

Pressure Sensor

Industry-leading Motion Sensor

Motion Sensor with 20 bit precision was unimaginable few months ago. Everybody can taste it yourself now.

Superb stability through temperature gradient and Vibration immunity few times better than in any other unit. Antialiasing feature and Spirit algorithms makes the Rescue function Top of the line.

Redundant PowerTrain

With Spirit 2 we have developed separated power supplies for the unit itself and peripherals. Now with Spirit GT design was enhanced to minimize voltage drops even for a peripherals!

Simplified Wiring

Our aim is simplicity. This mean you no longer need a special cables such as FrSky Integration cable or even JETI Integration cable. It can be replaced just with normal stright one.

Gold-plated Connectors

We care about reliability a lot. For big scale helicopters of 800 class or more extreme current amperage can develop. With Spirit GT connectors all losses are minimized.

Extensions

Spirit GT can be extended for basically unlimited servo outputs. If you will ever need to control 8 servos or more, with Spirit GT it will be possible in very near future.

Servos with telemetry feature will be supported in the upcoming update too.

Hardware

Very rigid, CNC milled, anodized and sandblasted enclosure
Color: Red and Black, matt
Material: High quality AL6061-T6
Dimension: 36.8x29.6x13.9mm, weight: 20g
Power supply: 3 - 15V @ 50mA
Operating temperature: -10°C to 60°C
Latest generation, Ultra Fast ARM processor: 462 DMIPS
IMU MEMS sensor with 20bit precision
(rotation to 2000°/s !)
Gold plated PCB with Pb-Free soldering
Laser Engraved labels for perfect visibility.
Integrated S-BUS Inverter
Integrated FrSky Integration cable
2x native Spektrum connectors
3x connector for power supply, 5x for servos
Revolutionary GeoLink support (GPS, vario, logger)
Spirit Aero support (from 1.6.0 Aero firmware)
All-pin protection
Redundant internal powertrain for maximum safety
Excessive tolerance for brown-outs
Dedicated capacitor for peripheral voltage stability
Simplified JETI receiver wiring
Embedded Pressure sensor
Dedicated Memory Chip for Real-Time logging
Gold-plated pin headers for high current transmission

Features

Super-smooth flight control
Paddle simulation with inexpressible feeling
Classic flybar mechanics support
Extreme vibration immunity for all helicopter types
Spectrum analysis for model diagnostics
Flight log with recorded events
Easy configuration with setup wizard
Smartphone or tablet support via Bluetooth and WiFi
(Modules are sold separately)
Spektrum, Jeti, OpenTX and HoTT radio integration
Available for Windows, OSX, Linux, Android, iOS,
WP, SailfishOS, FreeBSD, Raspberry Pi and more
Stabilisation for scale pilots and beginners
Reliable, full-featured rescue system
Integrated Bank Switching
Support for ESC Telemetry - HobbyWing, Kontronik,
Castle, YGE, Scorpion, OMP Hobby, Graupner
Governor for Electric, Nitro and Gasser Helicopters
BEC tester with load verification
Support for PWM, PPM, S-BUS, FrSky F.Port,
Spektrum DSM2/DSMX, JETI Duplex EX Bus,
SRXL/Graupner SUMD/JETI UDI/JR X-Bus receivers
Support for all servo types:
1520/960/760us @ 50 - 700Hz
Support for CCPM 90/120/135/140°
Real-Time telemetry log
Perfect flight log with 3D visualisation
Servo extension board for 8 servos and more

Manual

Available at the Wiki pages.

Package content

Spirit GT unit
USB interface
15cm receiver cables
4x 3M VHB doublesided adhesive tape

Mikado VBar RX-Only 6 channel receiver # 05599 69,00 €

Mon, 01 Jun 2026 11:17:55 +0200

VBar RX-Only, 6 channel receiver.

Not upgradeable (can not be updated to Pro/Pro+Rescue, can not be used with gyro sensors).

Product data:

Dimensions:	34 x 24 x 9 mm
Weight:	7 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, Spektrum, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- VStabi RX-Only, 6-Kanal Receiver
- Printed Manual (Quick-Start-Guide)

Mikado VStabi EVO VLink 7.x Express Alu-case orange # 05571 279,00 €

Wed, 11 Mar 2026 00:16:36 +0100

VBar EVO Highlights

New processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest available computing power on the market to this date
Innovative step-up/step-down voltage supply from 2 V up to 16 V at full power with high efficiency (less excess heat)
Full telemetry and range down to 2 V supply voltage
Improved high frequency technology for high power and sensitivity
Double sensor system using tried and tested technology and new sensors

The hardware allows for new specs:
Frame rates adjustable up to 1 kHz (1 ms) on the swash plate and 0.5 ms on the tail
ESC frame rate up to 1 KHz
Pulse width selecable between 1.5 ms down to 125 µS as well as digital high speed protocols
Improved algorithms: adjusted tot he new frame rates, new optimized digital filtering
Dynamic swash plate rotation (per bank)
New „Tail Torque Extension“ for motor driven tails, more control when the tail rotor is unloaded

Mikado VStabi EVO VLink 7.x Express neon-yellow # 05582 279,00 €

Thu, 30 Jul 2026 03:19:17 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case purple # 05570 279,00 €

Sun, 26 Jul 2026 17:12:12 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case brown # 05573 279,00 €

Wed, 11 Mar 2026 00:16:35 +0100

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case black # 05568 279,00 €

Sun, 12 Jul 2026 23:16:52 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case gold # 05574 279,00 €

Mon, 27 Jul 2026 18:59:38 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case grey # 05567 279,00 €

Thu, 09 Jul 2026 11:58:04 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case green # 05569 279,00 €

Sun, 26 Jul 2026 15:22:10 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case red # 05572 279,00 €

Thu, 30 Jul 2026 08:41:27 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express Alu-case blue # 05566 279,00 €

Thu, 25 Jun 2026 11:40:45 +0200

VBar EVO Highlights

Mikado VStabi EVO VLink 7.x Express white # 05581 279,00 €

Mon, 30 Mar 2026 08:04:57 +0200

VBar EVO Highlights

Mikado VBar RX-Only 9 channel receiver # 05561 79,00 €

Wed, 29 Jul 2026 11:32:05 +0200

VBar RX-Only, 9 channel receiver.

Not upgradeable (can not be updated to Pro/Pro+Rescue, can not be used with gyro sensors).

Product data:

Dimensions:	45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
Weight:	14 g
Supply Voltage:	3,5 - 8,4 V (2S Lipo)
Main unit:	Multiprotocol Single Line Receiver (VLink,UDI, S-Bus, Spektrum, PPM)
Gyrosensor:	none
Software:	VBasic Receiver Firmware
Hardware Requirements:	VBar Control
Availbale software upgrades:	none

Content:

- VStabi RX-Only, 9-Kanal Receiver
- Printed Manual (Quick-Start-Guide)

Mikado VStabi EVO VLink 7.x Express # 05539 249,00 €

Thu, 30 Jul 2026 08:41:28 +0200