Live-Hobby.de/Accessories/Drives/Brushless ESC & Motors/Controller products

GOOSKY 6S 80A Metal Co-brand ESC # GT020205 79,99 €

Mon, 06 Jul 2026 12:26:33 +0200

Goosky 6S 80A Metal Co-brand ESC

Current (cont./peak): 80A/120A
Cells: 3-8S LiPo
BEC: 5-12V @ 8A (Switch Mode) / Peak: 20A

Spare part suitable for:
GOOSKY Legend RS4 / RS4 Venom

YGE Aureus 185 Brushless ESC 185A with BEC # YGE-Aureus-185 569,00 €

Mon, 22 Jun 2026 20:47:32 +0200

Technical data:

6 - 12S Lipo
Current 185A, 270A chest
BEC 5.5V - 12V
BEC 10A continuous, 25A peak
"T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, and the proprietary YGE protocol for additional telemetry connections via, for example, YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2, and Spirit FBL.
Updateable (optional USB adapter available)
completely revised hardware and software (32-bit)
the PWM frequency is automatically adjusted to the needs of the motor
The specified current is the maximum continuous full throttle current with good cooling
Reverse regulation or shutdown in case of undervoltage
Current limiting
Undervoltage detection can be switched off
Speed control (Governor mode)
Soft start (sine or block commutation)
Super slow soft start for scale helicopters possible (60sec.)
Active freewheel, therefore unlimited partial load resistance
Automatic timing, or adjustable in 6 levels
EMK brake adjustable
F3A / Acro brake (brake force continuously adjustable in flight)
Min. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. power)
Speed limit: 240,000 rpm (2-pole)
Overtemperature / overload warning
Anti-flash: Reduces the switch-on spark
Basic programming via mode setup
Fine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available
Weight with cable: 269g
Dimensions: 96.5 x 47 x 28mm

Scope of delivery:
- YGE Aureus 185
- RC connection cable
- Fan
- Sticker
- Instructions

YGE Aureus 185 Brushless ESC 265A with Telemetry # YGE-Aureus-265 749,00 €

Thu, 05 Feb 2026 14:23:20 +0100

Technical Specifications:

6 - 14S Lipo
Current 265A, 400A chest
BEC 5.5V - 12V
BEC 15A continuous, 30A peak
"T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, and the proprietary YGE protocol for additional telemetry connections via, for example, YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2, and Spirit FBL.
Updateable (optional USB adapter available)
completely revised hardware and software (32-bit)
the PWM frequency is automatically adjusted to the needs of the motor
The specified current is the maximum continuous full throttle current with good cooling
Reverse regulation or shutdown in case of undervoltage
Current limiting
Undervoltage detection can be switched off
Speed control (Governor mode)
Soft start (sine or block commutation)
Super slow soft start for scale helicopters possible (60sec.)
Active freewheel, therefore unlimited partial load resistance
Automatic timing, or adjustable in 6 levels
EMK brake adjustable
F3A / Acro brake (brake force continuously adjustable in flight)
Min. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. power)
Speed limit: 240,000 rpm (2-pole)
Overtemperature / overload warning
Anti-flash: Reduces the switch-on spark
Basic programming via mode setup
Fine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available
Weight with cable: 265g
Dimensions: 112 x 54 x 31mm

Scope of delivery:
- YGE Aureus 265
- RC connection cable
- Fan
- Sticker
- Instructions

OMPHOBBY 85A ESC # OSHM4X023 99,90 €

Fri, 10 Jul 2026 23:14:16 +0200

85A ESC

Spare part suitable for:
OMPHOBBY M4 MAX

OMPHOBBY M4 65A ESC # OSHM4050 99,90 €

Thu, 26 Mar 2026 20:58:53 +0100

65A ESC

Includes:
1x 65A ESC

Spare part suitable for:
OMPHOBBY M4

HOBBYWING Platinum Pro 120A V5 3-8S LiPo 10A BEC # HW30203402 139,90 €

Mon, 27 Jul 2026 13:42:09 +0200

Platinum Pro 120A V5 3-8S LiPo 10A BEC

The Platinum V5 120A is small, powerful and, like the other ESC in the Platinum V5 series, it is characterized by particularly efficient heat dissipation. As a flight controller, it feels right at home in electronic helicopters of size 420-520. But of course, due to its specifications, it can also be used in medium-sized fixed-wing aircrafts.

The Platinum 120A V5 is equipped with a switchable BEC that can be set in the range 5 to 12 volts. In addition, the BEC also has a new anti-reverse circuit that can be used in parallel with external batteries, thus offering double protection. Compared to previous controller versions, the RPM accuracy algorithm also makes the Platinum 150A more powerful and reliable. The adjustable sensitivity for a constant speed enables every pilot to find a setting that suits their own flying style and the current flight conditions.

The special design also improves air circulation so that the operating temperature does not reach a critical level. The open design of the Platinum 120A V5 ESC is immediately apparent. The additional use of thermal tape and another heat sink inside extends the service life and improves heat dissipation on the otherwise sensitive external capacitors.

Features:

Switch-mode BEC with 5-12V
The 32-bit processor and the special algorithm for accurate RPM ensure enough power
Compatible with Mikado VBar Control and VBar Telemetry Ready and many more
Equipped with "DEO" (Driving Efficiency Optimization) for the best control characteristics and performance
Efficient cooling through ventilation slots on two sides
Multiple protective functions

Technical Specifications:

Type:	Brushless
Current (cont./peak):	120A/150A
Cells:	3-8S
BEC Voltage:	5-12V @ 10A (Switch Mode)
BEC Current (cont./peak):	10A/30A
Cable Battery/Motor	1x 10AWG (red, black) 3x 12AWG (black)
Plugs Battery/Motor:	4.0mm gold connectors
Dimensions:	83.2 x 37.1 x 22.5mm (without fan)
Weight:	150.4g
Optional Accessories:	HW30502001 LCD Program Box HW30850400 OTA Module
Application:	420-520 electric helicopter (main rotor length: 420-520mm)

Delivery:
1x ESC Platinum V5 120A
1x Manual

HOBBYWING Platinum Pro 150A V5.1 3-8S LiPo 10A BEC # HW30203501 169,90 €

Thu, 30 Jul 2026 03:19:17 +0200

Platinum Pro 150A V5.1 3-8S LiPo 10A BEC

The Platinum V5.1 150A is the ideal companion for electric helicopter and fixed-wing models. Equipped with the latest technology, it offers a variety of protective options to ensure a safe flight experience. The main new feature in version 5.1 is the revised switch mode BEC, which now supports 5 to 12 volts. Compared to the previous ESC version, the RPM accuracy algorithm makes the Platinum 150A even more powerful and reliable. The adjustable sensitivity for a constant speed also makes it easy for every pilot to find settings that suits their own flying style under current flight conditions.

The special design improves air circulation so that the operating temperature does not reach a critical level. The open design of the controller is immediately apparent. The additional use of thermal tape and another heat sink inside ensures an overall extension of the service life and improved heat dissipation on the external capacitors which are quite sensitive.

Features:

Improved switch-mode BEC with 5-12V instead of only up to 8V as with version 5
The 32-bit processor and the special algorithm for accurate RPM ensure even more power
Supports 520 to 580 flight models now instead of 550 to 580
Compatible with Mikado VBar Control and VBar Telemetry Ready and many more
Equipped with "DEO" (Driving Efficiency Optimization) for the best control characteristics and performance
Efficient cooling through ventilation slots on two sides
Multiple protective functions

Technical Specifications:

Current Cont./Peak:	150A/180A
No. of Cells:	3-8S
BEC Voltage:	5 - 12V @ 10A (Switch Mode)
BEC Current Cont./Peak:	10A / 30A
Cable Battery/Motor	1x 10AWG (red, black) 3x 12AWG (black)
Plugs Battery/Motor:	4mm gold plugs
Dimensions:	83,2 x 37,1 x 22,5mm
Weight:	150.4g
Optional Accessories:	HW30502001 LCD Program Box HW30850400 OTA Module
Application:	550-580 Elektric Helicopter (Main Rotor Length: 550-580mm)

Delivery:
1x ESC Platinum V5.1 150A
1x Manual

HOBBYWING Platinum Pro 80A V5 3-8S LiPo 5-12V/8A BEC # HW30203201 84,90 €

Wed, 22 Jul 2026 06:37:37 +0200

Hobbywing Platinum Pro 80A ESC V5 3-8s, 5-12V/8A BEC

The Platinum V5 80A V5 is an extremely powerful ESC with 5-12V switch BEC suitable for 325420 helicopters and fixed-wing. This is ensured by the built-in 32-bit processor in combination with a specially developed algorithm for RPM accuracy, which clearly sets the performance of the controller apart from similar controllers on the market. In addition to the algorithm, the Platinum V5 with 80A is equipped with various protocols that allow different transmitter systems to read the data from the ESC. These include, for example, the Mikado VBar system and Futaba S.BUS2.

The modern advantages that the Platinum V5 brings with it are also evident in the structural design, such as the many protective functions to make the next flight as safe as possible. This includes protection against overheating of the actual controller but also the attached capacitors. To prevent too much heat from being generated in the first place and this protection having to be activated, the controller has a double-sided heat sink with side ventilation. This allows air to flow quickly through the inside of the ESC and cool it down efficiently. If that is no longer enough, the various protective functions take effect and prevent greater damage.

Features:

Efficient cooling through cooling chamber design
Built-in 12V switch BEC (5-12V)
Supports multiple data protocols e.g. Mikado VBar System, Futaba S.BUS2, etc.
Including data recording, accessible on the smartphone thanks to Bluetooth
Multiple protection functions (e.g. against reverse currents)
16 adjustable parameters including 4 flight modes:
- Fixed wing
- Helicopter - External Governor
- Helicopter - Eleven Governor
- Helicopter - Store Governor

Technical Specifications:

Type:	Brushless High Voltage
Current (cont./peak):	80A/120A
Cells:	3-8S LiPo
BEC:	5-12V @8A (Switch Mode)
Cable battery/motor:	1x 12AWG (red, black) 1x 14AWG (black)
Programming:	- LCD Programming Box - OTA Program Module
Firmware Upgrade:	Yes
Telemetry:	Mikado VBar; Futaba S.Bus2; etc.
Dimensions:	60.5 x 33 x 17.6mm
Weight (incl. cables):	77.5g
Application:	325-420 class electric helicopter (main blade length 325-420mm) or fixed-wing

Delivery:
1x ESC Platinum V5 80A SBEC
1x Manual

HOBBYWING Platinum Pro 180A HV ESC V5 6-14s BEC 10A # HW30209103 294,90 €

Sat, 25 Jul 2026 15:50:11 +0200

Hobbywing Platinum Pro 180A HV ESC V5 5-14s, 10 A BEC

The Platinum V5 180A HV V5 is an extremely powerful ESC with 5-12V switch BEC suitable for 550-700 helicopters and fixed-wing. This is ensured by the built-in 32-bit processor in combination with a specially developed algorithm for RPM accuracy, which clearly sets the performance of the controller apart from similar controllers on the market. In addition to the algorithm, the Platinum V5 with 180A is equipped with various protocols that allow different transmitter systems to read the data from the ESC. These include, for example, the Mikado VBar system and Futaba S.BUS2.

Features:

Efficient cooling through cooling chamber design
Built-in 12V switch BEC (5-12V)
Supports multiple data protocols e.g. Mikado VBar System, Futaba S.BUS2, etc.
Including data recording, accessible on the smartphone thanks to Bluetooth
Multiple protection functions (e.g. against reverse currents)
16 adjustable parameters including 4 flight modes:
- Fixed wing
- Helicopter - External Governor
- Helicopter - Eleven Governor
- Helicopter - Store Governor

Technical Specifications:

Type:	Brushless High Voltage
Current (cont./peak):	180A/260A
Cells:	6-14S LiPo
BEC:	5-12V @10A (Switch Mode)
Cable battery/motor:	1x 10AWG (red, black) 3x 10AWG (black)
Programming:	- LCD Programming Box - OTA Program Module
Firmware Upgrade:	Yes
Telemetry:	Mikado VBar; Futaba S.Bus2; etc.
Dimensions:	100.6 x 45.5 x 26.1mm
Weight (incl. cables):	250.6g
Application:	550-700 electric helicopters and fixed-wing

Delivery:
1x ESC Platinum V5 180A HV SBEC
1x Manual

YGE Aureus 105 V2 Brushless ESC 105A 6-12S 5,5V-12V BEC # YGE-Aureus-105-V2 369,00 €

Mon, 18 May 2026 12:28:22 +0200

YGE Aureus 105 V2 brushless speed controller 105A for 6-12S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 6 to 12s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 10A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight: 146g
- Dimensions: 78 x 37 x 20mm
- Cable cross-section battery / motor: 4² / 4²

YGE Saphir 125 V2 Brushless ESC 125A 4-8S 5,5-12V BEC # YGE-Saphir-125-V2 309,00 €

Tue, 28 Jul 2026 17:26:25 +0200

YGE Saphir 125 V2 brushless speed controller 125A for 4-8S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 4 to 8s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 12A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight without/with cable: 80g/124g
- Dimensions: 76,5 x 34,5 x 19,5mm
- Cable cross-section battery / motor: 4² / 4²

YGE Saphir 155 V2 Brushless ESC 155A 4-8S 5,5-12V BEC # YGE-Saphir-155-V2 359,00 €

Sun, 14 Jun 2026 19:14:13 +0200

YGE Saphir 155 V2 brushless speed controller 155A for 4-8S with 5.5-12V BEC

Technical data:
- The specified current is the maximum continuous full throttle current with good cooling.
- 4 to 8s LiPo, reverse regulation in case of undervoltage.
- BEC 5.5V - 12.0V
- BEC 12A continuous, 25A peak
- Plug-in receiver and telemetry cables via JST sockets
- Adjustable current limit
- Undervoltage detection can be switched off
- Speed control (governor mode)
- Soft start (sine or block commutation)
- Super slow soft start possible for scale helis (60 sec.)
- Active freewheeling, therefore unlimited partial load resistance
- Automatic timing, or adjustable in 6 steps
- Automatic adjustment of the PWM frequency
- EMK brake adjustable
- Min. and max. values are saved and can be displayed after the flight (current, voltage, temperature, etc.)
- Speed limit: 240,000 rpm (2-Poler)
- Overtemperature / overload warning
- Anti-flash: Reduces the switch-on spark
- Basic programming via mode setup
- Fine adjustment and selection of telemetry protocol via PC setup. Matching USB adapter optionally available
- Weight without/with cable: 122g/178g
- Dimensions: 82 x 43.5 x 26mm
- Cable cross-section battery / motor: 6² / 4²

YGE Aureus 135 V2 Brushless ESC 6-12S # YGE-Aureus-135-V2 469,00 €

Tue, 14 Jul 2026 11:16:14 +0200

Technical Specifications:

BEC 5,5V - 12V
BEC 10A continuous, 25A Peak
"T" for Telemetry. following protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, YGE-protocol for different telemetry-connections for example via YGE TexY (Futaba, Spektrum, FrSky), MSH Brain 2 or Spirit FBL
Update capable (optional USB-Adapter available)
entirely overhauled hard- and software (32-bit)
the PWM-frequency will be set automatically to the requirements of the motor
The specified current is the maximum continuous full power current
6 to 12s LiPo, incl under voltage protection by power reduction
Current limiting
Disconnectable under voltage detection
Electronic speed control (Governor- mode)
Soft start
super soft startup for scale-helicopters possible (60 sec.)
Active free-wheel, allowing unlimited part load operation
Automatic or 6 step adjustable timing
Adjustable EMK brake
F3A(Acro brake (brake force control infinitely adjustable)
Frequency: 16 to 32 kHz
Speed limit: 240.000 rpm (2- Poles)
Temperature and overload warning
Anti- flash: decreases the closing spark
Basic -Programming with mode programming
Fine adjustment and selection of telemetry log with the PC Setup
Suitable USB-adapter optionally available
dimensions (mm): 82 x 43,5 x 26
weight with cables: 178g

Content:
- YGE Aureus 135 V2
- RC-Connection Cable
- Torodial Core
- Fan
- Sticker
- Manual

HOBBYWING Platinum Pro 260A HV V5 ESC 6-14s 10A BEC # HW30203100 459,90 €

Tue, 28 Jul 2026 00:37:00 +0200

Hobbywing Platinum Pro 260A HV ESC 6-14s, 10A BEC

The Platinum V5 260A HV V5 provides constant speed control, ensuring an excellent flying experience with its powerful 12V switch-mode BEC. The innovative housing design, featuring additional windows on the sides and internal structure, enables highly effective heat dissipation. This allows the generated heat to be directly transported from the circuit board to the outside through the shortest path. This is particularly necessary because the integrated 32-bit processor enhances the RPM algorithm's precision, thereby further strengthening the overall performance of the Platinum ESC (Electronic Speed Controller). The finely adjustable speed sensitivity ultimately allows every pilot to find a setting that suits them perfectly.

The ESC also incorporates Efficiency Optimization Technology with Synchronous Rectification (DEO: "Driving Efficiency Optimization" - Active Freewheeling), which brings several advantages at once:
- Faster throttle response, improved flight stability, and flexibility.
- Higher driving efficiency and longer battery life.
- Lower temperature increase of the ESC, ensuring reliability.

Features:

Efficient cooling through a sophisticated heat dissipation system with windows
Built-in 12V switch-mode BEC (5-12V)
Supports multiple data protocols, e.g.,
Mikado VBar System, Futaba S.BUS2, MSH Brain, and iKON
Includes data recording accessible via the OTA module on the smartphone
Multiple protection features
16 adjustable parameters, including 4 flight modes:
- Fixed Wing
- Helicopter - External Governor
- Helicopter - Express Governor
- Helicopter - Store Governor

Technical Specifications:

Type:	Brushless High Voltage
Current cont./peak:	260A/400A
Cells:	6-14S LiPo
BEC:	5-12V @10A (Switch Mode)
Cable battery/motor:	1x 8AWG (red, black) 3x 10AWG (black)
Programming:	- LCD Programming Box - OTA Bluetooth Programmer - Seperate Programming Port
Firmware upgrade:	Yes
Telemetry:	Mikado VBar;Futaba S.Bus2; MSH iKon;Brain and etc.
Dimensions:	89x50x34mm
Weight (incl. cable):	297g
Application:	700-800 Electric Helicopter (main rotor length: 690-880mm)

Delivery:
1x ESC Platinum V5 260A HV SBEC
1x Manual

Kontronik Brushless ESC 6-12S KOLIBRI 90 HV-I # 4350 449,90 €

Wed, 11 Mar 2026 00:15:51 +0100

The Kontronik Kolibri ESC have a high and stable performance. The KOLIBRI also provides the well-known safety functions of KONTRONIK products. As the software is based on our premium ESC KOSMIK, the KOLIBRI provides an optimal governor for your flight. It also features the well-known soft start-up and the flexible modus programming of the premium segment.

In addition, all versions have a very strong BEC with up to 9 V and 10 A continuous current.

As a further highlight, we integrated the telemetry functions. So the KOLIBRI provides telemetric data for Futaba, Multiplex, Graupner, Mikado and Jeti without an additional TelMe module.

Of course, all versions are prepared for Bluetooth communication and online updates.

Specifications KOLIBRI 90 HV-I:

with integrated telemetry
Telemetry protocole for Futaba, Jeti, Multiplex, Mikado, Graupner
Bluetooth-capable and online-updateable
6-12 S LiPo, 25-50 V
90 A continuous current
BEC 10 A continuous current
BEC 30 A peak current
105 g with cable
Size without capacitor 90x30,5x19 mm

The ESC is compatible with Heli class 550 and 600 with 12S.

Kontronik Brushless ESC 6-12S KOLIBRI 140 HV-I # 4360 569,90 €

Thu, 02 Jul 2026 13:22:06 +0200

Of course, all versions are prepared for Bluetooth communication and online updates.

Specifications KOLIBRI 140 HV-I:

with integrated telemetry
Telemetry protocole for Futaba, Jeti, Multiplex, Mikado, Graupner
Bluetooth-capable and online-updateable
6-12 S LiPo, 25-50 V
140 A continuous current
BEC 10 A continuous current
BEC 30 A peak current
170 g with cable
Size 93x46x32,2 mm

The ESC is compatible with Heli class 550 and 600 with 12S.

Kontronik Brushless ESC KOLIBRI 60 LV-I # 4320 209,90 €

Wed, 11 Mar 2026 00:15:51 +0100

Specifications KOLIBRI 60 LV-I:

2-6 S LiPo, 6-25 V
60 A continuous current
BEC 10 A continuous current
BEC 30 A peak current
71 g with cable
Size without capacitor 70x18x30 mm

Kontronik Brushless ESC KOLIBRI 140 LV-I # 4340 329,90 €

Thu, 26 Mar 2026 15:23:04 +0100

Specifications KOLIBRI 140 LV-I:

with integrated telemetry
2-6 S LiPo, 6-25 V
140 A continuous current
BEC 10 A continuous current
BEC 30 A peak current
160 g with cable
Size 77x23x36 mm

The ESC is compatible with Heli class 550 and 600 with 6S.

Kontronik Brushless ESC COOL KOSMIK 250 HV # 48220 999,90 €

Wed, 14 May 2025 11:22:47 +0200

The COOL KOSMIK 250 HV the new KONTRONIK flagship

• 250 A continuous current, up to 640 A peak current
• BEC with 10A continuous current and 30A peak current
• optimized governor
• telemetry on board

With the same seize and weight as the COOL KOSMIK 200 HV, our new COOL KOSMIK 250 HV provides even more power – 250 A continuous current and up to 640 A peak current!
Of course, there is a strong BEC on board with 10 A continuous current and up to 30 A peak current as well.
With improvements in hardware and software, we further optimized the well-established governor characteristics of the KOSMIK-series.

Telemetry integrated: As a further highlight, we integrated the telemetry functions. So, the COOL KOSMIK 250 HV provides telemetric data for Futaba, Multiplex, Graupner, Mikado and Jeti without an additional TelMe module.
Of course, it is also prepared for Bluetooth communication and online updates.

Technical data:

5-14 Lipo, 20-59 V
250 A continuous current
640 A peak
BEC 10 A continuous current
BEC 30A peak current
250 g without cable
size: 109,2 x 53,2 x 38,6 mm

The ESC is compatible with Heli class 700 to 800 with 12S.

Kontronik Brushless ESC KOLIBRI 90 LV-I # 4330 239,90 €

Wed, 10 Jun 2026 12:16:12 +0200

Specifications KOLIBRI 90 LV-I:

2-6 S LiPo, 6-25 V
90 A continuous current
BEC 10 A continuous current
BEC 30 A peak current
110 g with cable
Size without capacitor 70x19x30 mm

The ESC is compatible with Heli class 500 and 600 with 6S.