Live-Hobby.de/Accessories/Charger & Accessories/Charger Junsi products

Junsi iCharger S6 Charger DC LiPo 1-6S 1100W 194,90 €

Wed, 11 Mar 2026 00:15:59 +0100

With the new iCharger S6, the renowned manufacturer Junsi has brought a charger in pocket format on the market which is so far unique in its class. Up to 6s can be charged directly with up to 40A!

The operation is only via the much more stable rocker as known from the Junsi X8!

Despite the small dimensions of 83x71x36.5 mm, no compromises were made in performance and ease of use.

The technical data can be seen, 1100W charging power (from 23.5V), 1-6s LiPo cells and up to 40Amp charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged.

The discharge power is 50Watt, but can be increased up to 1100W by means of an external load (discharge resistor). Of course, the iCharger S6 is also capable of regenerative charging. Here, the battery capacity is fed back into the supply battery from a full flight battery, for example.

The balancer current of 2 amps always ensures perfectly balanced cell voltages.

A USB port and Micro SD slot can be used for logging data, but also for future updates.

The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.

A 2.4 IPS LCD display ensures good readability even in low light.

Technical data:

Max. Power: 1100W
Max. Discharge power: 1100W
Max. Number of NiCd/NiMH batteries: 20
Max. Voltage lead acid batteries: 24V
Balancer equalization current per output: 2A
Discharge current Adjustable with regeneration: 40A
Max. Charging current: 40A
Input current limit: 45A
Max. number of LiPo cells: 6
Length (mm): 83
Input voltage: 9-32VDC
Micro SD card slot: Yes
Power supply integrated: No
Plug type input: XT90
Plug Type Charging Output: XT90

Junsi iCharger X12 Charger DC LiPo 1-12S 1100W 246,90 €

Tue, 12 May 2026 12:02:08 +0200

With the new iCharger X12, the renowned manufacturer Junsi has brought a charger in pocket format on the market which is so far unique in its class. Up to 12s can be charged directly!

Despite the small dimensions of 112x64x37 mm, no compromises were made in performance and ease of use.

The technical data is impressive, 1100W charging power (from 23.5V), 1-12s LiPo cells and up to 30Amp charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged.

The discharge power is 50Watt, but can be increased up to 1100W by means of an external load (discharge resistor). Of course, the iCharger X12 is also capable of regenerative charging. Here, the battery capacity is fed back into the supply battery from a full flight battery, for example.

The balancer current of 2 amps always ensures perfectly balanced cell voltages.

A USB port and Micro SD slot can be used for logging data, but also for future updates.

The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.

A 2.4 IPS LCD display ensures good readability even in low light.

Technical data:

Input voltage: 11-53VDC
Max. Power: 1100W
Length (mm): 112
Max. number of LiPo cells: 12
Balancer equalization current per output: 2A
Max. Charge current: 30A
Discharge current Adjustable for regeneration: 30A
Max. Number of NiCd/NiMH batteries: 32
Input current limit: 35A
Max. Voltage lead acid batteries: 40V
Max. Discharge power: 50W
Micro SD card slot: Yes
Power supply integrated: No
Plug type input: XT60
Plug type charging output: XT60

ATTENTION! To be able to charge 12s a 13 pin XH connector is required on the battery! There is NO balancer board included to be able to charge e.g. 2x6s as 12! (CB-12XH/EH)

For 10s as 2x 5s the well known CB-1010 with the 11-11 wire can be used!

* Charging a 12S battery with 2 balancer connectors *
You will need a PCB with a connection cable matching the battery and the charger. Then the following sequence must be observed:
- First connect the charger to the power supply or a supply battery. If you use a power supply, switch it on first.
Pay attention! Only when the batteries are properly connected to the balancer board then connect to the charger!
- First plug the first balancer connector of cells 1 - 6 "batteries minus side, black cable" into the matching 6S slot of the board from the minus side,
- then plug the second balancer connector of cells 6-12 into the second 6S slot from the positive side "Batteries positive side, red cable". Now connect it to the charger. If it hasn't flashed and smoked by this point, you've done everything right!
- Only now connect the thick red main battery "+" charging cable to the charger, da- after that connect the thick black main "-" charging cable.

Connections: Avoid short circuits, otherwise there is a risk of injury! This described sequence is also valid for charging several batteries in series!
You are responsible for damages and defects that may occur in case of non-observance!

Junsi iCharger X8 Charger DC LiPo 1-8S 1100W 190,90 €

Thu, 16 Jul 2026 18:18:03 +0200

Junsi iCharger X8 Charger DC LiPo 1-8S 1100W

The Junsi iCharger X8 Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger features 8S capabilities and up to 1100W of power and up to 30 Amps of charge current.

Features:

X8 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum charge/discharge current of a channel is up to 30A.
X8 Supports 8s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-25s NiMH/NiCd batteries and 1-15s Pb batteries.
With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage protection, input undercurrent protection, and etc.)
Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
This charger can save 32 parameters sets and support the data import/export to SD card.
A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge.
Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
X8 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc.
Supports upgrading the hardware program by USB port or SD card. X8 also supports the “Junsi Console” software and can display, plot and analyze the charge and discharge data by it.

Technical specifications:
Display: 2.4 " IPS LCD (320×240)
Net weight: 200g
Dimension: 97.5×64.5×37 ±0.5mm
Input voltage range: 9—49VDC
Maximum input current limit: <35A
Maximum charge/discharge current: 30A
Maximum charge power capacity: 1100W
Maximum discharge power capacity: 50W
Maximum regenerative discharge power capacity: 1100W
Maximum extra discharge power capacity: 1000W @33.5V/30A
Maximum current drain for balancing: >2.0A

Junsi/iCharger Adapter board for 6S - XH to XH # CB1010-XH 11,90 €

Thu, 23 Jul 2026 08:14:11 +0200

Adapter board for 10S - XH to 6S XH

Suitable for: Junsi iCharger 4010DUO V2 and many more.

Junsi iCharger X6 Charger DC LiPo 1-6S 800W 164,90 €

Wed, 11 Mar 2026 00:15:59 +0100

Junsi iCharger X6 Charger DC LiPo 1-6S 800W

With the new iCharger X6, renowned manufacturer Junsi has launched a pocket-sized charger.

The new X6 loader combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket loader. Despite the small dimensions of 83x65x37 mm no compromises were made in terms of performance and usability.

The technical data are impressive, 800W charging power (from 23.5V), 1-6s LiPo cells and up to 30Ampere charging current are sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged.

The discharge capacity is 30 watts, but can be increased up to 900W by means of an external load (discharge resistor). Of course, the iCharger X6 also masters regenerative charging. Here, the battery capacity is fed back, for example, from a full flight battery in the supply battery.

The balance current of 2 amps always ensures perfectly balanced cell voltages.
A USB port and micro SD slot can be used to log the data, but also for future updates.
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4 "IPS LCD display ensures good readability even in low light.

Weight (g):	168
Accuracy Balancer (depending on the setting):	1mV
Max. Number of NiCd / NiMH batteries:	20
Max. Voltage lead batteries:	24V
Balancer equalizing current per output:	2A
Max. Discharge capacity:	30A*
Max. Charge capacity:	30A
Charging current adjustable per output:	30A
Discharge power when discharging at an output:	30W
Height (mm):	65
Integrated balancer for up to:	6S LiPo's
Input voltage:	7-32V
Charging power Max. Watt:	800W
Max. Leistung:	800W
Discharge current Adjustable with regeneration:	800W
Length (mm):	83
Width (mm):	83
External high-current discharge Asynchronous:	900W
Input current limit:	>35A
Fan:	Yes
Micro SD Card Slot:	Yes
Support of reflex charge:	Yes
Integrated balancer:	Yes
Netpower integrated	No

*Higher discharging speeds can only be achieved when connecting the X6 to an empty battery to store the current from the "to-be-discharged" battery from, not when connected to a power supply. Please read the manual on the discharging specifics.