OMPHOBBY OMP Heli M1 EVO red with Transmitter # OSHM0037

Product number: OSHM0037

RTF with Transmitter

Questions about product Sign in to watch list

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

OMP Hobby M1 EVO in RTF SET with Transmitter Radiomaster Pocket


The ideal introduction to the world of model helicopters.

The ingenious flight characteristics and good nature of the heli together with the appropriate, easy-to-use transmitter.

If beginner, advanced or professional the RTF set for every pilot or those who want to become one.


Specifications

* 3 flight phases with different speeds (1st flight phase with motor off with stick down / 2 - 3 motors permanently on for 3D)
* Optionally switch 3D normal flight / horizontal stabilization (can also be used as a rescue)
* Control behavior (DR) adjustable in the transmitter
* Motor off switch
* The helicopter's flight controller can also be used to adjust the response and agility to your own needs
* All settings can be made directly on the model without a PC or mobile phone
* The Canopy can be removed without tools, making adjustments and repairs easier
* Stable storage and transport box for the heli


We will tie up the helicopter and transmitter for you and test fly them.

After inserting the transmitter batteries and charging the flight battery, the set is ready for use.


Description Transmitter:

The RadioMaster Pocket is a small and light transmitter with great performance. It comes with the multiprotocol CC2500, and with the EdgeTX firmware. The helicopter is already programmed on the transmitter. The Pocket is also equipped with removable sticks and a foldable antenna, making it easy to transport and store. The required 18650 batteries are included in the scope of delivery.


Description Helicopter OMP M1 EVO

The OMP M1 EVO now comes with a new look and an aluminum carbon main frame.

  • OMP M1 EVO is a high-quality product developed by OMPHOBBY for helicopter enthusiasts. Its compact size makes it flexible for either indoor flight or outdoor violent flight.
  • High performance direct drive 3D helicopter with dual Brushless motors.
  • Dimensions: 290mm* 88mm *290mm (11.4inch*6.46inch*11.4inch)
  • Flying weight: Approx.118g
  • The dual ESC 's are improved using high-quality MOSFET' s with lower internal resistance, enhancing the flight characteristics even further. The built-in official receiver supports S-BUS and DSM/ DSMX satellites.
  • The flight controller built-in flight modes: stabilizing attitude and 3d.
  • While in 3D mode you can quickly switch to attitude mode. The flight controller also has fully adjustable parameters including gyro sensitivity, rates, gain and servo mid-point position / collective.
  • Six Core Advantages
  • Adjustable Flight Controller Parameters
  • Dual Brushless Direct Drive
  • High-performance 3D Flight
  • High Precision
  • low Noise
  • Easily Maintained



















Content:

  • OMPHOBBY M1 EVO Heli
  • Stable transport box
  • Replacement servo arms
  • Screwdriver 1mm hexagon
  • Swashplate Leveler
  • Wrench
  • 1x LiPo Battery 2s 350mAh
  • Charging cable XT60
  • transmitter Radiomaster Pocket (MODE 2)
  • transmitter battery 18650
  • Manual


Still needed:


  • Handy charging cable (for transmitter)
  • LiPo Charger


This model helicopter is not suitable for children under 14 years!

Attributes
Model name M1
Part number OSHM0037
Rotordurchmesser Ø - 300 mm
Execution RTF
Module RTF Heli Set

Customers also bought:

Battery
OMPHOBBY Lithium Battery set 2S 350mAh 50C

OMPHOBBY Lithium Battery set 2S 350mAh 50C

Spare part suitable for OMPHOBBY M1 / M1 EVO / Align T15
Art. OSHM1024

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

12,99 €*
Battery
Gens ace Battery LiPo 7,4V 400mAh 60C

Gens ace Battery LiPo 7,4V 400mAh 60C

Ideal for OMPHOBBY M1 and Align T15
Art. GEA4002S60JST

Currently sold out

17,99 €*
Product Reminder
Ladegerät
iSDT 1S - 2S USB Lipo Charger

iSDT 1S - 2S USB Lipo Charger

Art. OSHM1063

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

11,90 €*
iSDT D1 Charger 1-6S 100W AC / 250W DC

iSDT D1 Charger 1-6S 100W AC / 250W DC

Compact high performance charger with integrated power supply AC & DC operation100W power for mains operation, 250W for operation with DC voltage ( 10-30V )1-6s LiXx with up to 10A charge currentLatest scOS 2.0, update via USB-C possible
Art. iSDT-D1

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

105,90 €*

Wesentliche Information zu Kundenbewertungen:

Wir stellen nicht sicher, dass die veröffentlichten Bewertungen von solchen Verbrauchern stammen, die die Ware tatsächlich genutzt oder erworben haben.

No review available for this product.

Components / Addons

Recommended

Below you`ll find a list of compatible components / addons for the product OMPHOBBY OMP Heli M1 EVO red with Transmitter.

You will need at least one component from each product group. We continously run tests and quality check on all components. Products we find having outstanding quality or features are rewarded wirh our badge "Recommended".

Battery

Battery
OMPHOBBY LiPo Akku 7,4V 2S 350mAh 50C

OMPHOBBY LiPo Akku 7,4V 2S 350mAh 50C

Ersatzteil passend für OMPHOBBY M1 / M1 EVO / Align T15
Art. OSHM1024

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

12,99 €*
Battery
Gens ace Akku LiPo 7,4V 400mAh 60C

Gens ace Akku LiPo 7,4V 400mAh 60C

Optimal für OMPHOBBY M1 und Align T15
Art. GEA4002S60JST

Currently sold out

17,99 €*
Product Reminder

Crash-Kit

Crash-Kit
OMPHOBBY M1 EVO Crash Kit - rot
Recommended

OMPHOBBY M1 EVO Crash Kit - rot

Ersatzteil passend für OMPHOBBY M1 EVO
Art. OSGM1002

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

24,99 €*
Crash-Kit
OMPHOBBY M1 EVO Crash Kit - gelb

OMPHOBBY M1 EVO Crash Kit - gelb

Ersatzteil passend für OMPHOBBY M1 EVO
Art. OSGM1003

Currently sold out

24,99 €*
Product Reminder
Crash-Kit
OMPHOBBY M1 EVO Crash Kit - orange

OMPHOBBY M1 EVO Crash Kit - orange

Ersatzteil passend für OMPHOBBY M1 EVO
Art. OSGM1004

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

24,99 €*
Crash-Kit
OMPHOBBY M1 EVO Crash Kit - weiss

OMPHOBBY M1 EVO Crash Kit - weiss

Ersatzteil passend für OMPHOBBY M1 EVO
Art. OSGM1001

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

24,99 €*

Ladegerät

Ladegerät
iSDT 1S - 2S USB Lipo Ladegerät

iSDT 1S - 2S USB Lipo Ladegerät

Art. OSHM1063

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

11,90 €*

Ladekabel

Ladekabel
Ladekabel (T-REX 150) mit XH für Akku / XH für Ladegerät und 4mm Banane

Ladekabel (T-REX 150) mit XH für Akku / XH für Ladegerät und 4mm Banane

Das perfekte Ladekabel für den ALIGN T-Rex 150 passend für z.B.: Align T-REX 150 Li-Po Akku Scorpion Backup Guard Empfänger- Stromversorgung # S_Backup_Guard
Art. ZB-LK-XH

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

5,90 €*
Ladekabel
OMPHOBBY Ladekabel mit XH für Akku / XH für Ladegerät und XT60

OMPHOBBY Ladekabel mit XH für Akku / XH für Ladegerät und XT60

Art. OSHM1059

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

4,99 €*
Ladekabel
OMPHOBBY Ladekabel mit 3x XH für Akku / XH für Ladegerät und XT60

OMPHOBBY Ladekabel mit 3x XH für Akku / XH für Ladegerät und XT60

Ersatzteil passend für OMPHOBBY
Art. OSHM1060

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

8,99 €*

* incl. tax, plus shipping costs

** for the payment method prepayment from the day after the customer´s payment instruction; for other payment methods from the day after the conclusion of the contract