Mikado GLOGO 690 SX Helicopter Kit # 05212

Product number: MIK-05212

GLOGO 690 SX the Nitro of Mikado

Questions about product Sign in to watch list

Will be ordered for you

Within DE: 7 Business Days **
Outside DE: 10 Business Days**

GLOGO 690

  • Designed and tested by World Champion R/C Helicopter Pilot and long time Team Mikado Member, Kyle Dahl. 
  • Systematically designed and put through rigorous amounts of testing, this is the ideal 690 size Nitro machine, for every pilot, for every style of flying.
  • Mikado hasn’t had a model for the nitro market in 26 years, but the ultra light GLOGO 690 is the model worthy to bring NITRO back to MIKADO!

It utilizes tried and tested components from the existing LOGO 690 such as

  • 106 T Herring bone gear which is quiet, strong, and efficient
  • aluminum swashplate with new geometry for quicker cyclic response
  • robust tail drive via HTD-belt, with aluminum drive pulleys
  • stronger blade grips with Ø 5 mm blade grip bolt
  • stronger free wheel for higher torque
  • reinforced clamp ring for main rotor shaft

The carbon-aluminum chassis was built from the ground up specific for nitro application. It was designed to be lightweight, sturdy, and simple. Due to the vibration, and extreme heat caused by nitro engines, we felt that molded frames would not be a viable option. 

The benefits at a glance:

  • Due to the plastic rotor blade grips, belt drive, and super light tail box, it makes the GLOGO 690 one of the (if not the actual) lightest Nitro model on the market.
  • Because of the light belt drive and ultra light tail box, we did not have to use a larger main gear, or front mounted servos with bell cranks in order to attain proper CG.
  • As a result of the small main gear, and direct control servos, we were able to make a very small and aerodynamic canopy which provides ultimate performance and looks for the model. 
  • Utilizes the Synergy XL Spec Clutch which provides no slip engagement even at very low main rotor RPM.
  • One piece carbon side plates provide a stronger frame around the clutch stack area.
  • Clutch stack is mounted using 8 x M3 bolts, providing very strong and perfect alignment.
  • Designated wiring routes with frame grommets and zip tie slots, to take wires from the front of the model towards the rear.
  • Large front battery tray allows space for the use of large RX batteries so you can fly all day without charging! 
  • Boom supports mounted with threaded rod and nuts, which allows you to service them without dismounting the muffler. 
  • Plenty of mounting places for auxiliary equipment such as remote glow drivers, back up guards, etc.
  • The proven rotor head design has been in use on the LOGO 690 for nearly four years now. It is lightweight, and perfectly functional for this nitro model application.
  • Recommended main rotor blade sizes are 650-700 mm, depending on your personal taste and style of flying.
  • To power the GLOGO, you can use any nitro engine between the size of 91-120. In our testing we used OS91, YS96, and OS105 engines. 
  • In the beginning, there will be one gear ratio available: 8.15 with a 13 tooth pinion. In the future we may offer a 14 tooth pinion which will give a gear ratio of 7.57 for use with smaller 650 blades and higher RPM.
  • The newly designed canopy of the GLOGO 690 combines the known and appealing design and visibility with fantastic aerodynamics: this helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
  • Colored tail fins also help with visibility.
  • Proudly partnered with Synergy Model Helicopters, to utilize their proven Fuel Tank, Fan, and Fan shroud, along with the Synergy XL Spec Clutch. 
  • With off-the-shelf components, an all up weight of 4.1-4.35 kg (no fuel) is possible, depending on your component choices.

Size Specifications

  • Overall Length from back of tail box to the front of the canopy = 1,300 mm
  • Height from ground to top of head button = 425 mm

Model Specifications

  • Main rotor diameter: 1,560 mm w/697 mm blades
  • Main blade length: 697 mm  
  • Main shaft diameter: 10 mm  
  • Tail shaft diameter: 5 mm  
  • Spindle diameter: 8 mm 
  • Estimated weight: 4,100-4,350 grams (dry)

 

Content

  • illustrated manual
  • Motor pinion 13 teeth
  • CFK-Main Rotor Blades Rotortech
  • CFK-Tail Rotor Blades
  • Airbrush-Canopy

 

 

Needed To Complete:

  • 2.4 GHz Transmitter & Receiver (7-channel or more, helicopter system)
  • Nitro Engine, Size 90-120
  • Compatible muffler
  • (3) Cyclic Servos (Standard Size, 40 mm; High Torque recommended)   
  • (1) Tail Rotor Servo (Standard Size, 40 mm)  
  • 2s 5,000 mAh RX pack recommended
  • 3-Axis Flybarless System
  • Compatible Battery Charger 
  • Pitch Gauge  
  • Various tools, lubes & greases for setup and assembly

 

 

This model helicopter is not suitable for children under 14 years!

Attributes
Part number MIK-05212
Module Helicopter

Customers also bought:

Nitro engines
OS Max 105HZ-R

OS Max 105HZ-R

With Demand Regulator System, Cylinder capacity: 17,17 cm³ Output Power: 3,8 HP @ 15000 RPM Ideal power drive for 700 size Helicopter O.S. ENGINE  # OSMG1961
Art. OS18750

Will be ordered for you

Within DE: 7 Business Days **
Outside DE: 10 Business Days**

434,90 €*
Align Governor Sensor MICROBEAST Plus

Align Governor Sensor MICROBEAST Plus

Spare part suitable for: Microbeast Plus - Align Prod. # HEGBP002T
Art. HEGBP002T

Currently sold out

13,99 €*
Product Reminder
FBL System
Mikado VStabi NEO VLink 6.x Express with Alu-Case black

Mikado VStabi NEO VLink 6.x Express with Alu-Case black

Mikado # 05272
Art. MIK-05272

Currently sold out

269,00 €*
Product Reminder
Mikado GLOGO 690 SX Magnet RPM Sensor Mount

Mikado GLOGO 690 SX Magnet RPM Sensor Mount

suitable for Mikado GLOGO 690 SXMikado # 05268
Art. MIK-05268

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

9,90 €*

Wesentliche Information zu Kundenbewertungen:

Wir stellen nicht sicher, dass die veröffentlichten Bewertungen von solchen Verbrauchern stammen, die die Ware tatsächlich genutzt oder erworben haben.

No review available for this product.

Components / Addons

Recommended

Below you`ll find a list of compatible components / addons for the product Mikado GLOGO 690 SX Helicopter Kit.

You will need at least one component from each product group. We continously run tests and quality check on all components. Products we find having outstanding quality or features are rewarded wirh our badge "Recommended".

Battery

Battery
ManiaX LiPo 2S 5200mAh 7.4V ECO 30C
Recommended

ManiaX LiPo 2S 5200mAh 7.4V ECO 30C

ManiaX Power ECO Serie mit 30C
Art. MX74520030EC

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

34,11 €*

FBL System

FBL System
MSH Brain 2 Bluetooth Flybarless System

MSH Brain 2 Bluetooth Flybarless System

MSH Brain 2 Flybarless System mit Bluetooth und Rettungsfunktion
Art. MSH51630

Currently sold out

215,00 €*
Product Reminder
FBL System
Mikado VStabi NEO VLink 6.x Express

Mikado VStabi NEO VLink 6.x Express

Art. MIK-04949

Currently sold out

249,00 €*
Product Reminder
FBL System
BavarianDEMON AXON Flybarlesssystem

BavarianDEMON AXON Flybarlesssystem

Bavarian DEMON AXON Flybarlesssystem
Art. 96023

Currently sold out

359,90 €*
Product Reminder
FBL System
Mikado VStabi NEO 6.x Express

Mikado VStabi NEO 6.x Express

** V2 Hardware ** Mikado # 04945
Art. MIK-04945

Currently sold out

189,00 €*
Product Reminder
FBL System
MSH Brain 2 Flybarless System

MSH Brain 2 Flybarless System

MSH Brain 2 Flybarless System mit Rettungsfunktion
Art. MSH51636

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

175,00 €*

Tail Servo

Tail Servo
NEXSPOR BLS4012T Brushless HV Digital Servo (Heck)
Recommended

NEXSPOR BLS4012T Brushless HV Digital Servo (Heck)

40mm Brushless Heck – Servo für Hubschrauber der 500 – 800 Klasse
Art. BLS4012T

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

89,91 €*
Tail Servo
Align DS825M High Voltage Brushless Heckservo mit Alugehäuse

Align DS825M High Voltage Brushless Heckservo mit Alugehäuse

Geeignet als High Voltage Heck - Servo mit Vollalugehäuse für z.B. T-Rex , Mikado  Logo, Goblin, 550 / 600 / 700 / 800 usw. # HSD82501
Art. HSD82501

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

169,99 €*
Tail Servo
Align DS825 High Voltage Brushless Heckservo

Align DS825 High Voltage Brushless Heckservo

Geeignet als High Voltage Heck - Servo für z.B. T-Rex , Mikado  Logo, Goblin, 550 / 600 / 700 / 800 usw. # HSD82502
Art. HSD82502

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

148,49 €*
Tail Servo
THETA RAZOR-T1 Brushless HV Servo mit NFC

THETA RAZOR-T1 Brushless HV Servo mit NFC

40mm Heckservo für Helis der 550 - 800 Klasse.
Art. TS-RT1

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

125,91 €*
Tail Servo
NEXSPOR CLS4011T Coreless HV Digital Servo (Heck)

NEXSPOR CLS4011T Coreless HV Digital Servo (Heck)

40mm Coreless Heck – Servo für Hubschrauber der 500 – 800 Klasse
Art. CLS4011T

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

64,71 €*
Tail Servo
THETA RAZOR-T1 Black Brushless HV Servo mit NFC

THETA RAZOR-T1 Black Brushless HV Servo mit NFC

40mm Heckservo für Helis der 550 - 800 Klasse.
Art. TS-RT1B

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

125,91 €*

Nitro engines

Nitro engines
OS Max 105HZ-R mit Powerboost Pipe Combo
Recommended

OS Max 105HZ-R mit Powerboost Pipe Combo

Vergaser mit Regulator, Hubraum: 17,17 cm³ Leistung kW (PS) bei: 3,8 PS 15000 U/min Idealer Power Antrieb für 700er Helis - O.S. ENGINE  # OSMG1961 / OSMG2884
Art. OS18751

Will be ordered for you

Within DE: 7 Business Days **
Outside DE: 10 Business Days**

589,00 €*
Nitro engines
OS Max 105HZ-R

OS Max 105HZ-R

Vergaser mit Regulator, Hubraum: 17,17 cm³ Leistung kW (PS) bei: 3,8 PS 15000 U/min Idealer Power Antrieb für 700er Helis - O.S. ENGINE  # OSMG1961
Art. OS18750

Will be ordered for you

Within DE: 7 Business Days **
Outside DE: 10 Business Days**

434,90 €*
Nitro engines
OS GT 15 HZ II Benzin Heli Motor mit Powerboost Pipe Combo

OS GT 15 HZ II Benzin Heli Motor mit Powerboost Pipe Combo

Art. OS38157

Will be ordered for you

Within DE: 7 Business Days **
Outside DE: 10 Business Days**

529,90 €*
Nitro engines
OS Max 105HZ

OS Max 105HZ

Hubraum: 17,17 cm³ Leistung kW (PS) bei: 3,8 PS 15000 U/min Idealer Power Antrieb für 700er Helis - O.S. ENGINE  # OSMG1960
Art. OS18700

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

379,90 €*

Nitro engines parts

Nitro engines parts
Align Nitro Heli Vorglüheinheit und BEC B6M 2 In 1

Align Nitro Heli Vorglüheinheit und BEC B6M 2 In 1

Ersatzteile: Nitro Helis - Align Prod. # HEBB6M01W
Art. HEBB6M01

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

79,69 €*

Servo Set

Servo Set
NEXSPOR Heli Servo Set 3x BLS4021S / 1x BLS4012T
Recommended

NEXSPOR Heli Servo Set 3x BLS4021S / 1x BLS4012T

40mm Brushless Servo - Set für Hubschrauber der 550 – 700 Klasse
Art. BLS4021S-12T-SET

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

314,91 €*
Servo Set
THETA RAZOR HELI SET 3x C1 / 1x T1 Brushless HV Servo mit NFC

THETA RAZOR HELI SET 3x C1 / 1x T1 Brushless HV Servo mit NFC

40mm Heli Servoset Helis der 550 - 800+ Klasse
Art. TS-RC1-RT1

Currently sold out

476,91 €*
Product Reminder
Servo Set
NEXSPOR Heli Servo Set 3x CLS4027S / 1x CLS4011T

NEXSPOR Heli Servo Set 3x CLS4027S / 1x CLS4011T

40mm Coreless Servo - Set für Hubschrauber der 550 – 800 Klasse
Art. CLS4027S-11T-SET

Currently sold out

238,41 €*
Product Reminder
Servo Set
NEXSPOR Heli Servo Set 3x CLS4027S

NEXSPOR Heli Servo Set 3x CLS4027S

40mm Coreless Servo - Set für Hubschrauber der 550 – 800 Klasse
Art. CLS4027S-3SET

Currently sold out

179,91 €*
Product Reminder
Servo Set
THETA KENNY KO EDITION HV SERVO SET Brushless 3x THL788 1x THL782

THETA KENNY KO EDITION HV SERVO SET Brushless 3x THL788 1x THL782

40mm Heli Servoset Helis der 550 - 800+ Klasse
Art. TS-KKES

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

449,91 €*
Servo Set
NEXSPOR Heli Servo Set 3x BLS4021S

NEXSPOR Heli Servo Set 3x BLS4021S

40mm Brushless Servo - Set für Hubschrauber der 550 – 700 Klasse
Art. BLS4021S-3SET

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

251,91 €*

Connector

Connector
AS150 7mm Stecksystem mit Antiblitz 1 Set

AS150 7mm Stecksystem mit Antiblitz 1 Set

Set für 1x Heli und 1x Akku
Art. AS150S1

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

8,90 €*
Connector
AS150 7mm Stecksystem mit Antiblitz 5x Set

AS150 7mm Stecksystem mit Antiblitz 5x Set

Set für 5x Heli und 5x Akku
Art. AS150S5

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

38,90 €*

Swashplate Servo

Swashplate Servo
NEXSPOR BLS4021S Brushless HV Digital Servo (TS)
Recommended

NEXSPOR BLS4021S Brushless HV Digital Servo (TS)

40mm Brushless Taumelscheiben – Servo für Hubschrauber der 550 – 700 Klasse
Art. BLS4021S

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

89,91 €*
Swashplate Servo
NEXSPOR CLS4027S Coreless HV Digital Servo (TS)

NEXSPOR CLS4027S Coreless HV Digital Servo (TS)

40mm Taumelscheiben – Servo für Hubschrauber der 550 – 800 Klasse
Art. CLS4027S

Currently sold out

62,91 €*
Product Reminder
Swashplate Servo
THETA RAZOR-C1 Brushless HV Servo mit NFC

THETA RAZOR-C1 Brushless HV Servo mit NFC

40mm Taumelscheiben für Helis der 550 - 800 Klasse.
Art. TS-RC1

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

125,91 €*
Swashplate Servo
THETA THL798 Brushless HV Servo

THETA THL798 Brushless HV Servo

40mm Taumelscheiben für Helis der 550er Klasse bis Großmodelle
Art. TS-RTHL798

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

107,91 €*
Swashplate Servo
THETA RAZOR-C1 Black Brushless HV Servo mit NFC

THETA RAZOR-C1 Black Brushless HV Servo mit NFC

40mm Taumelscheiben für Helis der 550 - 800 Klasse.
Art. TS-RC1B

In stock, available

Within DE: 2 Business Days **
Outside DE: 5 Business Days**

125,91 €*

* incl. tax, plus shipping costs

** for the payment method prepayment from the day after the customer´s payment instruction; for other payment methods from the day after the conclusion of the contract