Junsi iCharger X6 Charger DC LiPo 1-6S 800W

Junsi iCharger X6 Charger DC LiPo 1-6S 800W

With the new iCharger X6, renowned manufacturer Junsi has launched a pocket-sized charger.

The new X6 loader combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket loader. Despite the small dimensions of 83x65x37 mm no compromises were made in terms of performance and usability.

The technical data are impressive, 800W charging power (from 23.5V), 1-6s LiPo cells and up to 30Ampere charging current are sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged.

The discharge capacity is 30 watts, but can be increased up to 900W by means of an external load (discharge resistor). Of course, the iCharger X6 also masters regenerative charging. Here, the battery capacity is fed back, for example, from a full flight battery in the supply battery.

The balance current of 2 amps always ensures perfectly balanced cell voltages.
A USB port and micro SD slot can be used to log the data, but also for future updates.
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4 "IPS LCD display ensures good readability even in low light.

*Higher discharging speeds can only be achieved when connecting the X6 to an empty battery to store the current from the "to-be-discharged" battery from, not when connected to a power supply. Please read the manual on the discharging specifics.