Junsi iCharger S6 Charger DC LiPo 1-6S 1100W

With the new iCharger S6, the renowned manufacturer Junsi has brought a charger in pocket format on the market which is so far unique in its class. Up to 6s can be charged directly with up to 40A!

The operation is only via the much more stable rocker as known from the Junsi X8!

Despite the small dimensions of 83x71x36.5 mm, no compromises were made in performance and ease of use.

The technical data can be seen, 1100W charging power (from 23.5V), 1-6s LiPo cells and up to 40Amp charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged.

The discharge power is 50Watt, but can be increased up to 1100W by means of an external load (discharge resistor). Of course, the iCharger S6 is also capable of regenerative charging. Here, the battery capacity is fed back into the supply battery from a full flight battery, for example.

The balancer current of 2 amps always ensures perfectly balanced cell voltages.

A USB port and Micro SD slot can be used for logging data, but also for future updates.

The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.

A 2.4 IPS LCD display ensures good readability even in low light.


Technical data:

Max. Power: 1100W
Max. Discharge power: 1100W
Max. Number of NiCd/NiMH batteries: 20
Max. Voltage lead acid batteries: 24V
Balancer equalization current per output: 2A
Discharge current Adjustable with regeneration: 40A
Max. Charging current: 40A
Input current limit: 45A
Max. number of LiPo cells: 6
Length (mm): 83
Input voltage: 9-32VDC
Micro SD card slot: Yes
Power supply integrated:    No
Plug type input: XT90
Plug Type Charging Output: XT90