General funktions
- 4 joystick functions, 6 switches, 2 knob controls, 2 linear sliders, optionally 2 stick switches.
- 2 operating hours counters, of which one relates to a stored model
- 2 freely settable stopwatches, with memory function
- Selectable large-scale display of stopwatches
- Key-lock function
- Selection of model, 20 internal model memories, extensible to 3862 models using optional SD-card (2 GB)
- Stored model can be selected directly from the startup display
- Trim value display in steps or %, with zeroising per trim memory
System funktions
- Trainer Mode with individual function switching and mixed operation
- Trainer function also on virtual channels, 8 or 12 channel operation
- Freely configurable trainer channel assignment
- Hardware-reversal for all controls and switches
- Stick mode settings 1-4
- User name of 10 characters
- Choice of language: German,, English, French, Italian, Spanish, Czech, Russian or Dutch.
Functions Basic
- Graphical servo monitor with neutral- and servo- test
- Choice of model and copy function, model name of 10 characters
- Model type selection, power model, glider, helicopter
- Frequency switching General/France and modulation switching 7/12 channel.
- Freely adjustable emission sequence for channels 1-8
- Free choice of control types and trimmer options for all functions
- Free choice of control type and trimmer options also for virtual channels.
- For all control types (including switces etc.) free choice of trimmer options
- Digital joystick trimming, optionally with normal- or ATL (asymmetric) trim function. Optionally in "global" mode (effective in all flight modes) or in "single" mode, (effective only in the relevant flight mode).
- Free assignment of control types for control channels 9 + 10.
- Servo centre point setting for channels 1-8
- Servo reversal for channels 1-10
- Failsafe setting, channel 3 (gas) in 7-channel mode, for all channels in multi-mode.
- Servo travel adjustment with limit function (ATV) for the 8 prop-channels
- End point setting with limit function for channels 1-8
- Switch off Motor function
- Trim step setting
- Idling 2, new with +/- rate
- Selectable mixer alarm
Functions for power models
a wide range of mixer menus for models with up to 4 wing-mounted servos. In addition to the choice of wing type, the user can also select from the following tail variants: normal, separate elevators with aileron function (ailvator) and V-tail. Deltas and powered flying wings with 2 ... 4 wing-mounted servos are also available. These mixer menus are pre-programmed to suit the model type, and contain all the essential mixer functions as standard.
- 5 freely assignable and switchable dual rate /expo settings.
- 5 free programmatic linear or 5 point curve per stored model, optionally with / without trimming and offset add-in.
- 5-point gas curve
- Speed settings for gas servo
- Rudder diferentiation
- Mixer spoiler (Flaperon)
- Mixer elevator- spoiler (Flaperon)
- Mixer rudder-aileron
- Mixer rudder-elevator
- Mixer Snap Roll
- Mixed adjustment
- Gyro setting
- Mixer motor, for 2-step switching of motors, with separate speed settings for steps 1 /2 as well as forwards and backwards.
Glider functions
Also for model gliders there are many mixer menus available for models with up to 6 wing-mounted servos. Optionally with or without motor. In addition to the choice of wing type, the user can also select from the following tail variants: normal, separate elevators with aileron function (ailvator) and V-tail. Flying wings with 2...6 wing-mounted servos can also be selected. These mixer menus are pre-programmed to suit the model type, and contain all the essential mixer functions as standard.
- 5 flight conditions per model memory, with priority allocation and adjustable switching delays. With logical switch function.
- 5 free programmatic linear or 5 point curve per stored model, optionally with / without trimming and offset add-in.
- Rudder differentiation
- Travel adjustment plain flaps
- Mixer aileron-plain flaps
- Mixer aileron-rudder
- Mixer spoiler-plain flaps
- Mixer elevator-spoiler
- Mixer plain flap-elevator
- Mixer rudder-aileron
- Mixer Butterfly with offset and delay settings
- Mixer Butterfly - elevator
- Mixer trim-mix for aileron, rudder, and elevator, with speed setting and and FZS-switch delay.
- Gyro settings
- Mixer motor, for 2-step switching of motors, with individual speed settings for steps 1 /2 as well as forwards and backwards.
- 5-point curve for motor function
Helicopter functions
The mixer menus for helicopters are mainly different by use of swash plate controls. All the classic linkage types are included as standard: H1, H2, HR3, HN3, H4 and the new H3 90° and H3 140°
A special feature is the new form of variable pushrod travel compensation for the H3 and H4 types. This function eliminates a common problem found with unequal travels, which can result in servo damage can occur in the long term, when travels are fairly large or asymmetrical. The speed of the pitch-axis (elevator) function can also be adjusted, in order to avoid the run-time differences with the HR3 / HN3 120° swashplate linkage.
- 5 free programmmatic linear or 5 point curves per stored model, optionally with / without trimming and offset add-in.
- Swash plate ring mixer
- 5-point-pitch curve normal, gas pre-selection 1,2,3, auto-rotation. With logic switch function. .
- 5-point-gas curve normal, gas preselection 1,2,3, auto-rotation. With logic switch function.
- Auto-rotation
- Swash plate mixer (virtual rotation)
- Swash plate mixer – Gas (Linear / Centre)
- Tail mixer – Gas (Linear / Center)
- 5-Point mixer tail pitch, normal, gas presetting 1,2,3, auto-rotation. With logical switch function.
- Mixed adjustments
- Gyro mixer with 3 steps and fine trim setting
- Governor with 3 steps and fine trim setting
- Gas Limiter
Deutsch
English