Chargery S1500 V2 power supply 10-25V 60A 1500W # S1500

• Intelligent control output voltage and current by microprocessor, 100% calibration before delivery
• ±1% voltage and current accuracy
• Active PFC: smaller AC input current less interference, and Conform to European Commission Regulation no 278/2009 and Energy Star Version 2.0
• AC 90-265V worldwide operation: need not any alternative switcher, worldwide safe operation.
• Low power consumption (less than 1W) at idle mode and standby mode
• Up to 94% of convert efficiency
• Programmable output voltage from 10 to 25V
• Programmable output current from 5 to 60A
• 1.8? TFT color LCD display output Voltage, current, power and internal temperature on time.
• Over current, over voltage, over load, over temperature, and short circuit protection
• Short-circuit protection on output, safer and more reliable.
• 2 Intelligent cooling fans turned on upon the temperature automatically
• 4 outputs can do more chargers simultaneously, 3 pairs 4.0mm gold connector up to 20A each output, one 4.5mm gold connector (XT-90) up to 60A
• ZVS/ZCS and Synchronous Rectification assure the highest efficiency.
• High power density: 652W/Kg
• Start at no load or full load
• Approved by CE
• 24 months warranty

Environment Requirements:

• Ambient Temperature: -10 - 45°C
• Ambient Humidity: 5% - 95%
• Storage Temp: -20 - 70°C
• Storage Humidity: 30% - 90%

Input:

• Rated Voltage: AC110 / 220V
• Voltage allowed: AC90 - 265V
• Rated Freq.: 50/60Hz
• Freq. Allowed : 47-63Hz
• Max Current :  18A @90V, 7.5A @220V
• Efficiency: 94% at 65% load and 220Vac input
• Active PFC: PF>0.99 at 90VAC and 100% of load; PF>0.97 at 220VAC and 100% of load

Output:

• Voltage : 10 - 25V programmed
• Voltage accuracy: ±1%
• Ripple voltage: 150mV
• Current: 0 - 60A (62A MAX)

Protection:

• Over voltage protection: 25.5V max
• Over current protection: 62A max
• Over load protection: 1550W max
• Over temperature protection 90°C max
• Short- circuit protection on output

Mechanical Characteristics:

• Size:252*145*68 (L*W*H, mm) or 9.9 * 5.7 * 2.7 (L*W*H, inch)
• Weight: 2.3Kg without input cable
• Input power cable: AWG14 wire,  1.5m length

Output DC connector:

• 3 pairs 4mm gold banana female connector, each connector for up to 20A maximal current
• one 4.5mm gold male connector (XT90) for up to 60A

Packaging Information:

• S1500 base unit: 1pcs   V2.1
• Power cable: 1pcs
• Manual: 1pcs
• XT-90 female connector with AWG10 silicon glue wire: 1pcs

The XT-90 Female connector used to connection of S1500 and your charger or other loads at 60A