Align T-REX 150 GRS (MC/RX/ESC) Steuereinheit incl. Brushless-Regler-Einheit # HEG15004

GRS Steuereinheit incl. Brushless-Regler-Einheit

Instruction:
-Use for T-REX 150.
-6-axis Gyro-3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor. 3D feeling is superior while auto-level ability is also agile and stable.
-Attitude Auto-level Mode-While there is no stick input for helicopter, the heli will auto-level and still keep at horizontal position, which is suitable for beginners.
-Rescue Mode-While wrong stick input is given or heli is in trouble, or you are in panic, activate the rescue mode by flipping a switch on the radio to keep helis at a level position.
-3D Flying-Brand new DFCS(Direct Flight Control System)Contorller allows to control real time flight. Strong Cortex-M4 Processor allows T-REX 150 to fly just like big scale helicopters.
-Built-in Receiver-Futaba S-FHSS 2.4GHz System.
-Plug-in Receiver(Required)-Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite

 

Specifikation:
150GRS Flybarless System:
-Operating voltage range- 2S Li-Po
-Operating current consumption- -Rotational detection rate- 2000°/sec
-Rudder yaw detection rate- 2000°/sec
-Sensor resolution-16BIT
-Operating temperature--20- ~ 65-
-Operating humidity-0% ~ 95%
-Swashplate Support : MODE H-1
-Receiver Support : ALIGN / Futaba S-FHSS-DSM2 / DSMX / DMSS
-Transmit Distance: In open space without interference <150M

150X Brushless ESC:
-Main motor output current: Continuous 6A / Surge 7A
-Tail motor output current: Continuous 3A / Surge 3.5A
-BEC output current: Continuous 5V/2A / Surge 5V/2A
-Persistent maximum current require optimal heat dissipation condition.
-Supported motor types: 2 poles to 18 poles brushless outrunners.
-Maximum rotational speed: 2 poles-240000 RPM, 12 poles-40000 RPM.
-Input voltage: 2S Li-Po.


Accessories:
-150 Main Control Board x 1
-150 Receiver Board x 1
-7A Brushless ESC x 1
-150 GRS Double Sided Tape A x 1
-150 GRS Double Sided Tape B x 1
-150 Battery Socket x 1
-150 Battery Socket Mount x 1



Ersatzteil passend für:
Align T-REX 150